Optimum Establishment of Total Station
Publication: Journal of Surveying Engineering
Volume 143, Issue 2
Abstract
At least two control points (CPs) must be available to determine the position and orientation of a total station (TS). This paper analyzes the optimum horizontal location of the TS with respect to the CPs and answers the question: What is the best location of the TS with respect to the CPs if the goal is to determine the coordinates of the TS and detail points (DPs) as precisely as possible? The optimality is based on the uncertainty of the horizontal coordinates of the TS and of the points measured from it, as well as on the uncertainty of the TS orientation. The investigation of this optimality problem was performed both analytically and by the trial-and-error method. It was found that the optimum location of TS is in the center of gravity of all CPs. For a given configuration of the control and DPs, the location of the TS does not influence significantly the positional uncertainty of the surveyed DPs.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the support from The Swedish Research Council FORMAS, project 245-2012-356.
References
Amiri-Simkooei, A., Asgari, J., Zangeneh-Nejad, F., and Zaminpardaz, S. (2012). “Basic concepts of optimization and design of geodetic networks.” J. Surv. Eng., 172–183.
Baarda, W. (1973). S-Transformation and criterion matrices, Netherland Geodetic Commission, Delft, the Netherlands.
Bagherbandi, M., Eshagh, M., and Sjöberg, L. E. (2009). “Multi-objective versus single-objective models in geodetic network optimization.” Nordic J. Surv. Real Estate Res., 6(1): 7–20.
Berber, M., Dare, P., and Vaníček, P. (2006). “Robustness analysis of two-dimensional networks.” J. Surv. Eng., 168–175.
Ghilani, C. D. (2010). Adjustment computations: Spatial data analysis, 5th Ed., John Wiley & Sons, New York.
Grafarend, E. W. (1974). “Optimization of geodetic networks.” Boll. Geod. Sci. Aff., 33(4), 351–406.
Horemuz, M., and Andersson, J. V. (2011). Analysis of the precision in free station establishment by RTK GPS.” Surv. Rev., 43(323), 679–686.
Kahmen, H., and Faig, W. (1988). Surveying, Walter de Gruyter, Berlin.
Koch, K. R. (1982). “Optimization of the configuration of geodetic networks.” Deutsche Geodaetische Kommission, B, 258/III, 82–89, German Geodetic Commission, Munich.
Koch, K. R. (1985). “First order design: Optimization of the configuration of a network by introducing small position changes.” Optimization and design of geodetic networks, E. W. Grafarend and F. Sansó, eds., Springer, Berlin, 56–73.
Kuang, S. L. (1991). “Optimization and design of deformation monitoring scheme.” Ph.D. dissertation, Tech. Rep. No. 157, Dept. of Surveying Engineering, Univ. of New Brunswick, New Brunswick, Canada.
Kuang, S. L. (1996). Geodetic network analysis and optimal design: concepts and applications, Ann Arbor Press, Chelsea, MI.
Leick, A. (1995). GPS satellite surveying, Wiley & Sons, New York.
MATLAB R2015a [Computer software]. MathWorks, Natick, MA.
Seemkooei, A. A. (2001a). “Comparison of reliability and geometrical strength criteria in geodetic networks.” J. Geod., 75(4), 227–233.
Seemkooei, A. A. (2001b). “Strategy for designing geodetic network with high reliability and geometrical strength criteria.” J. Surv. Eng., 104–117.
Sun, H. (2013). “Precision analysis of free-station positioning in total station.” Adv. Mat. Res., 694–697, 1281–1285.
Vaníček, P., Craymer, M. R., and Krakiwsky, E. J. (2001). “Robustness analysis of geodetic horizontal networks.” J. Geod., 75(4), 199–209.
Vaníček, P., Krakiwsky, E. J., Craymer, M. R., Gao, Y., and Ong, P. S. (1990). “Robustness analysis.” Tech. Rep. 156, Dept. of Surveying Engineering, Univ. of New Brunswick, New Brunswick, Canada.
Xu, P,. and Grafarend, E. W. (1995). “A multi-objective second-order optimal design for deforming networks.” Geophys. J. Int., 120(3), 577–589.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Jan 26, 2016
Accepted: Jun 7, 2016
Published online: Jul 29, 2016
Discussion open until: Dec 29, 2016
Published in print: May 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.