Accurate and Swift Approach to As-Built Mapping in TBM-Excavated Tunnels
Publication: Journal of Surveying Engineering
Volume 142, Issue 4
Abstract
This paper offers a new method for mapping as-built tunnels excavated by tunnel-boring machines (TBMs) that is conveniently applicable and cost-effective. The presented procedure can algorithmically be explained as follows: (1) surveying some points on the edge of each segment using a reflectorless total station in an arbitrarily initial coordinate system, (2) shifting the measured coordinates to a location as close as the origin of the initial frame, (3) fitting a plane to the shifted coordinates of the measuring points, (4) deriving the direction angles between the normal vector and the axes of the coordinate system, (5) rotating the shifted coordinates around the third and first axes of the frame, (6) fitting a circle to the transformed coordinates to determine the position of its origin, and (7) transforming the derived coordinates of the circle origin into the initial coordinate system. The capability and reliability of the method have been indicated by means of simulated data sets. The method has also been applied to the survey measurements in excavating Line 7 of the Tehran metro network by TBM. The results affirm the proficiency of the proposed method to scan as-built tunnels.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors express their gratitude to anonymous reviewers for their constructive comments and suggested corrections.
References
Berberan, A., Machado, M., and Batista, S. (2007). “Automatic multi total station monitoring of a tunnel.” Surv. Rev., 39(305), 203–211.
Calvert, C. E. (1989). “GPS observations and the channel tunnel.” Surv. Rev., 30(1), 3–14.
Charles, W. D. (1999). “Monitoring of movements above large shallow jacked tunnels.” Proc., Geo-Congress 98, ASCE, Reston, VA, 39–60.
Cooper, J. T. (1974). “Surveys for a mass transit system in Hong Kong.” Surv. Rev., 22(172), 257–264.
Fekete, S., and Diederichs, M. (2013). “Integration of three-dimensional laser scanning with discontinuum modelling for stability analysis of tunnels in blocky rockmasses.” Int. J. Rock Mech. Min. Sci., 57, 11–23.
Fekete, S., Diederichs, M., and Lato, M. (2009). “Geotechnical applications of lidar scanning in tunnelling.” Proc., 3rd CAN-US Rock Mechanics Symp. (RockEng09), Canadian Rock Mechanics Association, Toronto, and American Rock Mechanics Association, Alexandria, VA, 1–12.
Fekete, S., Diederichs, M., and Lato, M. (2010). “Geotechnical and operational applications for 3-dimensional laser scanning in drill and blast tunnels.” Tunnelling Underground Space Technol., 25(5), 614–628.
Girmscheid, G., and Schexnayder, C. (2003). “Tunnel boring machines.” Pract. Period. Struct. Des. Constr., 150–163.
Greening, W. (1988). “GPS surveys and Boston's central artery/third harbor tunnel project.” J. Surv. Eng., 165–171.
Guglielmetti, V., Grasso, P., Mahtab, A., and Xu, S. (2007). “Mechanized tunnelling in urban areas: Design methodology and construction control.” Taylor & Francis, Leiden, The Netherlands.
Han, J.-Y., Guo, J., and Jiang, Y.-S. (2013). “Monitoring tunnel deformations by means of multi-epoch dispersed 3D LiDAR point clouds: An improved approach.” Tunnelling Underground Space Technol., 38, 385–389.
Haneberg, W. C. (2008). “Using close range terrestrial digital photogrammetry for 3-D rock slope modeling and discontinuity mapping in the United States.” Bull. Eng. Geol. Environ., 67(4), 457–69.
Kavvadas, M. J. (2005). “Monitoring ground deformation in tunnelling: Current practice in transportation tunnels.” Eng. Geol., 79(1–2), 93–113.
Lam, S. Y. W. (2006). “Application of terrestrial laser scanning methodology in geometric tolerances analysis of tunnel structures.” Tunnelling Underground Space Technol., 21(3–4), 410.
Lam, S. Y. W., and Chan, A. P. C. (2011). “Engineering surveying for the construction of railway tunnels in Hong Kong.” Geomatica, 65(2), 167–174.
Lam, S. Y. W., and Tang, C. H. W. (2001a). “A computer system for surveying railway alignments in Hong Kong.” Aust. Surveyor, 46(1), 12–16.
Lam, S. Y. W., and Tang, C. H. W. (2001b). “An overview of surveying techniques for the construction of highway tunnels in Hong Kong.” Geomatica, 55(3), 325–332.
Lato, M. J., and Diederichs, M. S. (2014). “Mapping shotcrete thickness using LiDAR and photogrammetry data: Correcting for over-calculation due to rockmass convergence.” Tunnelling Underground Space Technol., 41, 234–240.
Lichti, D., Gordon, S., and Tipdecho, T. (2005). “Error models and propagation in directly georeferenced terrestrial laser scanner networks.” J. Surv. Eng., 135–142.
Menéndez-Díaz, A., Argüelles-Fraga, R., García-Cortés, S., and Ordóñez-Galán, C. (2015) “Stability analysis of a tunnel using LIDAR data and the keyblock method.” Bull. Eng. Geol. Environ.
Mills, J., and Barber, D. (2004). “Geomatics techniques for structural surveying.” J. Surv. Eng., 56–64.
Robinson, G. L., Greening, W. J. T., and Silver, E. C. (1995). “Geodetic control for underground construction of the superconducting super collider.” Surv. Rev., 33(257), 177–187.
Solarić, N., Veršić, Z., and Špoljarić, D. (2005). “Independent control of GPS networks above long tunnels by astronomically determined azimuths or bearing angles.” Surv. Rev., 38(298), 308–316.
Wolf, P. R. (2002). “Surveying and mapping: History, current status, and future projections.” J. Surv. Eng., 79–107.
Zhao, Y., and Qi, T. (2014). “Tunneling-induced settlement evaluation for new tunnel underneath existing tunnel.” Proc., Geo-Shanghai 2014, ASCE, Reston, VA, 143–154.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Oct 20, 2014
Accepted: Jan 14, 2016
Published online: Mar 10, 2016
Discussion open until: Aug 10, 2016
Published in print: Nov 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.