Morphological Analysis for Architectural Applications: Comparison between Laser Scanning and Structure-from-Motion Photogrammetry
Publication: Journal of Surveying Engineering
Volume 142, Issue 3
Abstract
Terrestrial laser scanning (TLS) and structure-from-motion photogrammetry (SfM) can both provide dense and accurate point clouds. Therefore, they can be used to perform a morphological analysis of the façades of a masonry building, which relies on evaluation of the differences between the point cloud and a reference regular surface fitted to it. To compare TLS and SfM performance in morphological analysis, multimodal surveys were carried out on the square cross-section, 48-m-high Garisenda Tower in Bologna, Italy (reference surface: plane), and the circle cross-section, 42-m-high Caorle’s leaning bell tower in Venice, Italy (reference surface: moving cylinder). The results show that the TLS- and SfM-based morphologies are qualitatively the same, and the relative differences are lower than 10%–20% under the condition that the viewpoint positions (VPs) are optimal. Also, the overall geometries are correctly described by both the techniques. The main conclusion is that, if no particular constraints exist (e.g., unavoidable suboptimal VPs, night surveys are needed, or trees hide the surface), TLS and SfM have similar performance in morphological analysis.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors thank Stefano Castelli, technician at the University of Padua, for the implementation of the photographical survey and the aid kindly provided in TLS measurements.
References
Andrews, D. P., Bedford, J., and Bryan, P. G. (2013). “A comparison of laser scanning and structure from motion as applied to the Great Barn at Harmondsworth, UK.” Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., XL-5(W2), 31−36.
Arndt, R. W. (2010). “Square pulse thermography in frequency domain as adaptation of pulsed phase thermography for qualitative and quantitative applications in cultural heritage and civil engineering.” Infrared Phys. Technol., 53(4), 246–253.
Binda, L., Saisi, A., and Zanzi, L. (2003). “Sonic tomography and flat-jack tests as complementary investigation procedures for the stone pillars of the temple of S. Nicolò l'Arena (Italy).” NDT and E Int., 36(4), 215−227.
Catbas, F. N., Brown, D. L., and Aktan, A. E. (2006). “Use of modal flexibility for damage detection and condition assessment: case studies and demonstrations on large structures.” J. Struct. Eng., 1699−1712.
De Luca, L., Busarayat, C., Stefani, C., Véron, P., and Florenzano, M. (2011). “A semantic-based platform for the digital analysis of architectural heritage.” Comput. Graph., 35(2), 227−241.
Franceschi, M., Teza, G., Preto, N., Pesci, A., Galgaro, A., and Girardi, S. (2009). “Discrimination between marls and limestones using intensity data from terrestrial laser scanner.” ISPRS J. Photogramm. Remote Sens., 64(6), 522−528.
GNU Octave [Computer software]. Free Software Foundation, Boston.
Granshaw, S. I., and Fraser, C. S. (2015). “Editorial: Computer vision and photogrammetry: Interaction or introspection?” Photogramm. Rec., 30(149), 3−7.
James, M. R., and Robson, S. (2012). “Straightforward reconstruction of 3D surfaces and topography with a camera: Accuracy and geoscience application.” J. Geophys. Res., 117(F3).
Koutsoudis, A., Vidmar, B., Ioannakis, G., Arnaoutoglou, F., Pavlidis, G., and Chamzas, C. (2014). “Multi-image 3D reconstruction data evaluation.” J. Cultur. Heritage, 15(1), 73–79.
MATLAB [Computer software]. MathWorks, Natick, MA.
McCann, D. M., and Forde, M. C. (2001). “Review of NDT methods in the assessment of concrete and masonry structures.” NDT and E Int., 34(2), 71–84.
Ninfo, A., et al. (2012). “The survey and mapping of sand-boil landforms related to the Emilia 2012 earthquakes: Preliminary results.” Ann. Geophys., 55(4), 727–733.
Optech. (2015). “ILRIS 3D laser scanner description.” 〈http://www.optech.com/index.php/product/optech-ilris〉 (Oct. 16, 2015).
Pesci, A., Casula, G., and Boschi, E. (2011a). “Laser scanning the Garisenda and Asinelli towers in Bologna (Italy): Detailed deformation patterns of two ancient leaning buildings.” J. Cultur. Heritage, 12(2), 117−127.
Pesci, A., and Teza, G. (2008). “Terrestrial laser scanner and retro-reflective targets: An experiment for anomalous effects investigation.” Int. J. Remote Sens., 29(19), 5749−5765.
Pesci, A., Teza, G., and Bonali, E. (2011b). “Terrestrial laser scanner resolution: Numerical simulations and experiments on spatial sampling optimization.” Remote Sens., 3(1), 167−184.
Pesci, A., Teza, G., Bonali, E., Casula, G., and Boschi, E. (2013). “A laser scanning-based method for fast estimation of seismic-induced building deformations.” ISPRS J. Photogramm. Remote Sens., 79, 185−198.
PhotoScan [Computer software]. Agisoft, St. Petersburg, Russia.
PolyWorks [Computer software]. Innovmetric, Quebec.
Rabah, M., Elhattab, A., and Fayad, A. (2013). “Automatic concrete cracks detection and mapping of terrestrial laser scan data.” NRIAG J. Astron. Geophys., 2(2), 250–255.
Remondino, F., Spera, M. G., Nocerino, E., Menna, F., and Nex, F. (2014). “State of the art in high density image matching.” Photogramm. Rec., 29(146), 144–166.
Roncella, R., Re, C., and Forlani, G. (2011). “Performance evaluation of a structure and motion strategy in architecture and cultural heritage.” Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci., 38(5), 285–292.
Rui, A. (2008). 15 campanili d'Italia. Vianello Libri, Ponzano Veneto, TV, Italy (in Italian).
Rüther, H., Smit, J., and Kamamba, D. (2012). “A comparison of close-range photogrammetry to terrestrial laser scanning for heritage documentation.” S. Afr. J. Geol., 1(2), 149–162.
Teza, G., and Pesci, A. (2013). “Geometric characterization of a cylinder-shaped structure from laser scanner data: Development of an analysis tool and its use on a leaning bell tower.” J. Cultur. Heritage, 14(5), 411−423.
Teza, G., Pesci, A., and Trevisani, S. (2015). “Multisensor surveys of tall historical buildings in high seismic hazard areas before and during a seismic sequence.” J. Cultur. Heritage, 16(3), 255−266.
Westoby, M. J., Brasington, J., Glasser, N. F., Hambrey, M. J., and Reynolds, J. M. (2012) “‘Structure-from-Motion’ photogrammetry: A low-cost, effective tool for geoscience applications.” Geomorphology, 179, 300–314.
Yastikli, N. (2007). “Documentation of cultural heritage using digital photogrammetry and laser scanning.” J. Cultur. Heritage, 8(4), 423–427.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: May 14, 2015
Accepted: Nov 9, 2015
Published online: Jan 28, 2016
Discussion open until: Jun 28, 2016
Published in print: Aug 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.