Evaluation of the Credibility of Reflectorless Distance Measurement
Publication: Journal of Surveying Engineering
Volume 136, Issue 4
Abstract
Reflectorless distance measurement provides the ability to easily make quick measurements saving time and labor for surveyors. The precision and accuracy of these types of measurements are under discussion because of the variety of parameters that can affect these measurements that are not well-understood. This paper attempts to answer some of the questions that have arisen about the credibility of reflectorless distance measurements ranging up to 50 m. An experiment was carried out using 26 different materials as the reflecting surface (these materials were also of differing colors). Additionally, the experiment used three different angles of incidence of the incoming electromagnetic energy with three different types of reflectorless total stations over a variety of ranges. A further experiment was conducted with an additional total station using 11 different materials at different ranges. To properly evaluate the results, a special supporting base was manufactured for holding the reflecting surface to ensure accuracy in the evaluation. The results are presented in tables and the conclusions that are derived indicate that further investigation is needed, especially at longer distances, as the parameters that influence reflectorless distance measurement in those situations are many more, and more important than at short ranges.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bayoud, F. (2006). Leica’s pinpoint EDM technology with modified signal processing and novel optomechanical features, XXIII FIG Congress, Munich.
Iliodromitis, A. (2008). “Analysis of the reflectorless distance measurement and research the accuracy of the points’ coordinates determination.” MS thesis, NTUA, Athens, Greece.
Leica Geosystems. (2005). System 1200 newletter—No. 17, Surveying & Engineering Division, ⟨http://www.leica-geosystems.con/en/page_catalog.htm?cid=4660&page=2⟩.
Leica Geosystems. (2007). Leica TPS 1200+: A telescope with new opto-mechanical design, White Paper, Heerbrugg, Switzerland.
Mavrakis, S. (2008). “Investigation of the credibility of the distance measurement using reflectorless total stations.” MS thesis, NTUA, Athens, Greece.
Mills, J., and Barber, D. (2004). “Geomatics techniques for structural surveying.” J. Surv. Eng., 130(2), 56–64.
Paiva, J. (2001a). “Operational aspects of reflectional EDM total stations.” American congress on surveying and mapping, ⟨http://surveying.wb.psu.edu/sur111/Lectures/surveyissue2.pdf⟩.
Paiva, J. (2001b). “A new refinement to a familiar technology, time-of-flight EDM in a total station.” American congress on surveying and mapping, ⟨http://surveying.wb.psu.edu/sur111/Lectures/surveyissue2.pdf⟩.
Trimble. (2005). Direct reflex EDM technology for the surveyor and civil engineer Trimble survey, White Paper.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Nov 7, 2008
Accepted: Feb 2, 2010
Published online: Feb 8, 2010
Published in print: Nov 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.