Effect of Superstructure Deformation Capacity on the Collapse Performance of Seismically Isolated Buildings
Publication: Journal of Structural Engineering
Volume 148, Issue 7
Abstract
Earlier studies found that acceptable probabilities of collapse for seismically isolated buildings could be achieved by an appropriate combination of strength in the superstructure, isolator displacement capacity, and stiffening behavior. The results were based on the study of braced and moment frames in which the story drift ratio at collapse was predetermined on the basis of the design details of the frames (special or ordinary in steel). This paper further investigates the effects the value of the peak story drift limit at which collapse occurs, in combination with the displacement capacity of the isolation system, have on the collapse probability of these structures. The results provide information on the utilization of superstructures with fewer ductile design details in seismically isolated buildings. This is important because buildings with fewer ductile design details have lower construction costs and can be built more quickly.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
References
AISC. 2010. Steel construction manual. Chicago: AISC.
Almazan, J. L., and J. C. de la Llera. 2013. “Accidental torsion due to overturning in nominally symmetric structures isolated with the FPS.” Earthquake Eng. Struct. Dyn. 32 (2): 919–948. https://doi.org/10.1002/eqe.255.
ASCE. 2017. Minimum design loads and associated criteria for buildings and other structures. Reston, VA: ASCE.
Basu, D., M. C. Constantinou, and A. S. Whittaker. 2014. “An equivalent accidental eccentricity to account for the effects of torsional ground motion on structures.” Eng. Struct. 69 (3): 1–11. https://doi.org/10.1016/j.engstruct.2014.02.038.
Basu, D., A. S. Whittaker, and M. C. Constantinou. 2012. Characterizing the rotational components of earthquake ground motion. Buffalo, NY: Multidisciplinary Center for Earthquake Engineering Research.
Bradley, C. R., L. A. Fahnestock, E. M. Hines, and J. G. Sizemore. 2017. “Full-scale cyclic testing of low-ductility concentrically braced frames.” J. Struct. Eng. 143 (6): 04017029. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001760.
Bruneau, M., C. M. Uang, and R. Sabelli. 2011. Ductile design of steel structures. 2nd ed. New York: McGraw-Hill Education.
Cilsalar, H., and M. C. Constantinou. 2017. “Effect of vertical ground motion on the response of structures isolated with friction pendulum isolators.” Int. J. Earthquake and Impact Eng. 2 (2): 135–157. https://doi.org/10.1504/IJEIE.2017.089048.
Cilsalar, H., and M. C. Constantinou. 2020. “Parametric study of seismic collapse performance of lightweight buildings with spherical deformable rolling isolation system.” Bull. Earthquake Eng. 18 (4): 1475–1498. https://doi.org/10.1007/s10518-019-00753-7.
FEMA. 1997. NEHRP guidelines for the seismic rehabilitation of buildings. Washington, DC: FEMA.
FEMA. 2009. Quantification of building seismic performance factors. Washington, DC: FEMA.
Fenz, D. M., and M. C. Constantinou. 2008. “Spherical sliding isolation bearings with adaptive behavior: Theory.” Earthquake Eng. Struct. Dyn. 37 (2): 163–183. https://doi.org/10.1002/eqe.751.
Harrington, C. C., and A. B. Liel. 2016. “Collapse assessment of moment frame buildings, considering vertical ground shaking.” Earthquake Eng. Struct. Dyn. 45 (15): 2475–2493. https://doi.org/10.1002/eqe.2776.
Haselton, C. B., J. W. Baker, A. B. Liel, and G. G. Deierlein. 2011. “Accounting for ground-motion spectral shape characteristics in structural collapse assessment through an adjustment for epsilon.” J. Struct. Eng. 137 (3): 332–344. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000103.
Hughes, P. J., and G. Mosqueda. 2020. “Evaluation of uniaxial contact models for moat wall pounding simulations.” Earthquake Eng. Struct. Dyn. 49 (12): 1197–1215. https://doi.org/10.1002/eqe.3285.
Kelly, J. M. 1993. Earthquake-resistant design with rubber. Berlin: Springer.
Kikuchi, M., C. J. Black, and I. D. Aiken. 2008. “On the response of yielding seismically isolated structures.” Earthquake Eng. Struct. Dyn. 37 (5): 659–679. https://doi.org/10.1002/eqe.777.
Kitayama, S., and M. C. Constantinou. 2018. Seismic performance assessment of seismically isolated buildings designed by the procedures of ASCE/SEI 7. Buffalo, NY: Multidisciplinary Center for Earthquake Engineering Research.
Kitayama, S., and M. C. Constantinou. 2019. “Effect of displacement restraint on the collapse performance of seismically isolated buildings.” Bull. Earthquake Eng. 17 (3): 2767–2786. https://doi.org/10.1007/s10518-019-00554-y.
Kitayama, S., and M. C. Constantinou. 2021. “Effect of superstructure modeling assumptions on the seismic performance of seismically isolated buildings.” Earthquake Eng. Struct. Dyn. 50 (7): 1805–1823. https://doi.org/10.1002/eqe.3427.
Masroor, A., and G. Mosqueda. 2015. “Assessing the collapse probability of base-isolated buildings considering pounding to moat walls using the FEMA P695 methodology.” Earthquake Spectra 31 (4): 2069–2086. https://doi.org/10.1193/092113EQS256M.
McKenna, F. T. 1997. “Object-oriented finite element programming: Frameworks for analysis, algorithms and parallel computing.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Univ. of California, Berkeley.
Ryan, K. L., and N. D. Dao. 2016. “Influence of vertical ground shaking on horizontal response of seismically isolated buildings with friction bearings.” J. Struct. Eng. 142 (1): 04015089. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001352.
Sarlis, A., M. C. Constantinou, and A. Reinhorn. 2013. Shake table testing of triple friction pendulum isolators under extreme conditions. Buffalo, NY: Multidisciplinary Center for Earthquake Engineering Research.
Vamvatsikos, D., and C. A. Cornell. 2002. “Incremental dynamic analysis.” Earthquake Eng. Struct. Dyn. 31 (3): 491–514. https://doi.org/10.1002/eqe.141.
Vassiliou, M. F., A. Tsiavos, and B. Stojadinović. 2013. “Dynamics of inelastic base-isolated structures subjected to analytical pulse ground motions.” Earthquake Eng. Struct. Dyn. 42 (14): 2043–2060. https://doi.org/10.1002/eqe.2311.
Winters, C. W., and M. C. Constantinou. 1993. Evaluation of static and response spectrum analysis procedures of SEAOC/UBC for seismic isolated structures. Buffalo, NY: Multidisciplinary Center for Earthquake Engineering Research.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Sep 15, 2021
Accepted: Feb 25, 2022
Published online: May 3, 2022
Published in print: Jul 1, 2022
Discussion open until: Oct 3, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.