Shear Strength Model for Reinforced Concrete Bridge Columns with Multispiral Transverse Reinforcement
Publication: Journal of Structural Engineering
Volume 148, Issue 3
Abstract
A shear strength model is proposed for reinforced concrete bridge columns with multispiral transverse reinforcement. The proposed model consists of a proposed discrete computational shear strength model for multispiral reinforcement and shear strength models for concrete and axial load adopted from the literature. The proposed discrete computational model calculates shear strength from each discrete location of the interception between the shear crack and multispiral reinforcement. Furthermore, the model considers the critical location of the shear crack, shear crack angle, direction of shear, and effect of the compression zone. The proposed model together with the Caltrans SDC model, Sezen’s model, and Priestley’s model are used to predict the shear strength of multispiral columns tested in the literature. Comparison between the prediction and test result shows that the proposed shear strength model produces the best prediction in terms of the mean and standard deviation of the ratio of experimental to predicted shear strength. Based on analysis and test observations, equations to estimate the compression depth of multispiral columns at the ultimate condition and the shear crack angle are proposed to be used in the proposed discrete computational shear strength model.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This research is funded by Vietnam National Foundation for Science and Technology Development (NAFOSTED) under Grant No. 107.99-2017.316.
References
AASHTO. 2011. AASHTO guide specifications for LRFD seismic bridge design. 2nd ed. Washington, DC: AASHTO.
Ang, B. G., M. J. N. Priestley, and T. Paulay. 1989. “Seismic shear strength of circular reinforced concrete columns.” ACI Struct. J. 86 (1): 45–59.
Benzoni, G., M. J. N. Priestley, and F. Seible. 2000. “Seismic shear strength of columns with interlocking spiral reinforcement.” In Proc., 12th World Conf. on Earthquake Engineering. Upper Hutt, New Zealand: New Zealand Society for Earthquake Engineering.
Caltrans SDC (California Department of Transportation). 2019. Seismic design criteria version 2.0. Sacramento, CA: Caltrans SDC.
Chen, Y., J. Feng, and S. Yin. 2012. “Compressive behavior of reinforced concrete columns confined by multi-spiral hoops.” Comput. Concr. 9 (5): 341–355. https://doi.org/10.12989/cac.2012.9.5.341.
Correal, J. F., M. S. Saiidi, D. Sanders, and S. El-Azazy. 2007. “Shake table studies of bridge columns with double interlocking spirals.” ACI Struct. J. 104 (4): 393–401.
Dancygier, A. N. 2001. “Shear carried by transverse reinforcement in circular RC elements.” J. Struct. Eng. 127 (1): 81–83. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:1(81).
Darwin, D., C. W. Dolan, and A. H. Nilson. 2016. Design of concrete structures. 15th ed. New York: McGraw-Hill.
Igase, Y., K. Nomura, T. Kuroiwa, and T. Miyagi. 2002. “Seismic performance and construction method of bridge columns with interlocking spiral/hoop reinforcement.” Concr. J. 40 (2): 37–46. https://doi.org/10.3151/coj1975.40.2_37.
Jaafar, K. 2009. “Discrete versus average integration in shear assessment of spiral links.” Can. J. Civ. Eng. 36 (2): 171–179. https://doi.org/10.1139/L08-106.
Kenneth, J., and J. P. Moehle. 2005. “Axial capacity model for shear-damaged columns.” ACI Struct. J. 102 (4): 578–587.
Kim, J. H., and J. B. Mander. 2005. “Theoretical shear strength of concrete columns due to transverse steel.” J. Struct. Eng. 131 (1): 197–199. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:1(197).
Mander, J. B., M. J. N. Priestley, and R. Park. 1988. “Theoretical stress-strain model for confined concrete.” J. Struct. Eng. 114 (8): 1804–1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804).
McLean, D. I., and G. C. Buckingham. 1994. Seismic performance of bridge columns with interlocking spiral reinforcement. Olympia, WA: Washington State Transportation Center.
Ou, Y. C., and S. H. Ngo. 2016a. “Discrete computational shear strength models for 5-, 6-, and 11-circular-hoop and spiral transverse reinforcement.” Adv. Struct. Eng. 19 (1): 23–37. https://doi.org/10.1177/1369433215622876.
Ou, Y. C., and S. H. Ngo. 2016b. “Discrete shear strength of two- and seven-circular-hoop and spiral transverse reinforcement.” ACI Struct. J. 113 (2): 227–238. https://doi.org/10.14359/51688058.
Ou, Y. C., S. H. Ngo, H. Roh, S. Y. Yin, J. C. Wang, and P. H. Wang. 2015. “Seismic performance of concrete columns with innovative seven- and eleven-spiral reinforcement.” ACI Struct. J. 112 (5): 579–592. https://doi.org/10.14359/51687706.
Ou, Y. C., S. H. Ngo, S. Y. Yin, J. C. Wang, and P. H. Wang. 2014. “Shear behavior of oblong bridge columns with innovative seven-spiral transverse reinforcement.” ACI Struct. J. 111 (6): 1339–1349. https://doi.org/10.14359/51686873.
Priestley, M. J. N., R. Verma, and Y. Xiao. 1994. “Seismic shear strength of reinforced concrete columns.” J. Struct. Eng. 120 (8): 2310–2329. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:8(2310).
Sezen, H., and J. P. Moehle. 2004. “Shear strength model for lightly reinforced concrete columns.” J. Struct. Eng. 130 (11): 1692–1703. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:11(1692).
Tanaka, H., and R. Park. 1993. “Seismic design and behavior of reinforced concrete columns with interlocking spirals.” ACI Struct. J. 90 (2): 192–203.
Wight, J. K. 2016. Reinforced concrete: Mechanics and design. 7th ed. Upper Saddle River, NJ: Pearson Education.
Wu, T. L., Y. C. Ou, S. Y. L. Yin, J. C. Wang, P. H. Wang, and S. H. Ngo. 2013. “Behavior of oblong and rectangular bridge columns with conventional tie and multi-spiral transverse reinforcement under combined axial and flexural loads.” J. Chin. Inst. Eng. 36 (8): 980–993. https://doi.org/10.1080/02533839.2012.747047.
Yin, S. Y. L., T. L. Wu, T. C. Liu, S. A. Sheikh, and R. Wang. 2011. “Interlocking spiral confinement for rectangular columns.” ACI Concr. Int. 33 (12): 38–45.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: May 18, 2021
Accepted: Nov 3, 2021
Published online: Dec 30, 2021
Published in print: Mar 1, 2022
Discussion open until: May 30, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Yu-Chen Ou, Nguyen Van Bao Nguyen, Wei-Ru Wang, Seismic shear behavior of new high-strength reinforced concrete column and steel beam (New RCS) joints, Engineering Structures, 10.1016/j.engstruct.2022.114497, 265, (114497), (2022).