Behavior and Design of Steel-Concrete Composite Columns Subjected to Combined Axial Compression and Biaxial Moment
This article has been corrected.
VIEW CORRECTIONPublication: Journal of Structural Engineering
Volume 147, Issue 8
Abstract
Steel-concrete composite columns are strong and efficient structural members. However, their strength is not consistently recognized within design standards. In particular, current provisions regarding the strength of composite columns under combined axial compression and biaxial bending are overly simplistic and conservative. This paper presents a study of the biaxial behavior of square and rectangular, filled and encased composite columns and methods of evaluating their strength. Analyses of composite cross sections confirm the conservative nature of current design provisions and form the basis for modified strength equations that better capture the shape of the three-dimensional interaction surface. Analyses of composite columns confirm that the proposed design equations are suitable for use within the direct analysis method for evaluating members with length effects. The proposed design equations are further validated against published experimental results. This paper provides key insights on the behavior of composite columns subjected to axial compression and biaxial bending and offers an improved yet practical method of evaluating strength under these conditions that will enable more efficient designs.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
References
Abdel-Rahman, N., and K. S. Sivakumaran. 1997. “Material properties models for analysis of cold-formed steel members.” J. Struct. Eng. 123 (9): 1135–1143. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:9(1135).
ACI (American Concrete Institute). 2014. Building code requirements for structural concrete and commentary. Farmington Hills, MI: ACI.
AISC. 2016. Specification for structural steel buildings. Chicago, IL: AISC.
ASCE. 1997. Effective length and notional load approaches for assessing frame stability: Implications for American steel design. Reston, VA: ASCE.
ASTM. 2019. Standard specification for general requirements for rolled structural steel bars, plates, shapes and sheet piling. ASTM A6/A6M-11. West Conshohocken, PA: ASTM.
ASTM. 2020a. Standard specification for cold-formed welded and seamless carbon steel structural tubing in rounds and shapes. ASTM A500/A500M. West Conshohocken, PA: ASTM.
ASTM. 2020b. Standard specification for deformed and plain carbon-steel bars for concrete reinforcement. ASTM A615/A615M. West Conshohocken, PA: ASTM.
Behnam, A., and M. D. Denavit. 2020. “Plastic stress distribution method for predicting interaction strength of steel-concrete composite cross sections.” J. Constr. Steel Res. 170 (Jul): 106092. https://doi.org/10.1016/j.jcsr.2020.106092.
Brent, R. P. 2013. Algorithms for minimization without derivatives. Chelmsford, MA: Courier Corporation.
Bridge, R. Q. 1976. Concrete filled steel tubular columns. Sydney, Australia: School of Civil Engineering, University of Sydney.
CEN (European Committee for Standardization). 2004. Design of composite steel and concrete structures—Part 1.1: General rules and rules for buildings. Brussels, Belgium: CEN.
Denavit, M. D., and J. F. Hajjar. 2014. Characterization of behavior of steel-concrete composite members and frames with applications for design. Urbana, IL: Univ. of Illinois at Urbana-Champaign.
Denavit, M. D., J. F. Hajjar, T. Perea, and R. T. Leon. 2016. “Stability analysis and design of composite structures.” J. Struct. Eng. 142 (3): 1–12. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001434.
Forsythe, G. E., M. A. Malcolm, and C. B. Moler. 1977. Computer methods for mathematical computations. Hoboken, NJ: Prentice Hall.
Furlong, R. W., C.-T. T. Hsu, and S. A. Mirza. 2004. “Analysis and design of concrete columns for biaxial bending-overview.” Struct. J. 101 (3): 413–422.
Galambos, T. V., and R. L. Ketter. 1959. “Columns under combined bending and thrust.” J. Eng. Mech. Div. 85 (2): 1–30. https://doi.org/10.1061/JMCEA3.0000084.
Goode, C. D. 2008. “Composite columns-1819 tests on concrete-filled steel tube columns compared with Eurocode 4.” Struct. Eng. 86 (16): 33–38.
Gourley, B. C., C. Tort, M. D. Denavit, P. H. Schiller, and J. F. Hajjar. 2008. A synopsis of studies of the monotonic and cyclic behavior of concrete-filled steel tube members, connections, and frames. Urbana, IL: Newmark Structural Engineering Laboratory, Univ. of Illinois at Urbana-Champaign.
Hardika, M. S., and N. J. Gardner. 2004. “Behavior of concrete-filled hollow structural section beam columns to seismic shear displacements.” Struct. J. 101 (1): 39–46.
Hu, H.-T., C.-S. Huang, M.-H. Wu, and Y.-M. Wu. 2003. “Nonlinear analysis of axially loaded concrete-filled tube columns with confinement effect.” J. Struct. Eng. 129 (10): 1322–1329. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:10(1322).
Kanchanalai, T. 1977. The design and behavior of beam-columns in unbraced steel frames. Austin, TX: Structures Research Laboratory, Dept. of Civil Engineering, Univ. of Texas at Austin.
Liang, Q. Q., V. I. Patel, and M. N. Hadi. 2012. “Biaxially loaded high-strength concrete-filled steel tubular slender beam-columns. Part I: Multiscale simulation.” J. Constr. Steel Res. 75 (Aug): 64–71. https://doi.org/10.1016/j.jcsr.2012.03.005.
MacGregor, J. G., and S. E. Hage. 1977. “Stability analysis and design of concrete frames.” J. Struct. Div. 103 (10): 1953–1970. https://doi.org/10.1061/JSDEAG.0004745.
McKenna, F., M. H. Scott, and G. L. Fenves. 2010. “Nonlinear finite-element analysis software architecture using object composition.” J. Comput. Civ. Eng. 24 (1): 95–107. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000002.
Morino, S., C. Matsui, and H. Watanabe. 1984. “Strength of biaxially loaded SRC columns.” In Composite and mixed construction, 185–194. New York: ASCE.
Patel, V. I., Q. Q. Liang, and M. N. Hadi. 2015. “Biaxially loaded high-strength concrete-filled steel tubular slender beam-columns. Part II: Parametric study.” J. Constr. Steel Res. 110 (Jul): 200–207. https://doi.org/10.1016/j.jcsr.2012.03.029.
Perea, T., R. T. Leon, J. F. Hajjar, and M. D. Denavit. 2014. “Full-scale tests of slender concrete-filled tubes: Interaction behavior.” J. Struct. Eng. 140 (9): 04014054. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000949.
Popovics, S. 1973. “A numerical approach to the complete stress-strain curve of concrete.” Cem. Concr. Res. 3 (5): 583–599. https://doi.org/10.1016/0008-8846(73)90096-3.
SAC (Standardization Administration of the People’s Republic of China). 2014. Technical code for concrete filled steel tubular structures. GB 50936-2014. Beijing: SAC.
Sakino, K., H. Nakahara, S. Morino, and I. Nishiyama. 2004. “Behavior of centrally loaded concrete-filled steel-tube short columns.” J. Struct. Eng. 130 (2): 180–188. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(180).
Shakir-Khalil, H., and M. Mouli. 1990. “Further tests on concrete-filled rectangular hollow-section columns.” Struct. Eng. 68 (20): 405–413.
Shakir-Khalil, H., and J. Zeghiche. 1989. “Experimental behaviour of concrete-filled rolled rectangular hollow-section columns.” Struct. Eng. 67 (19): 346–353.
Surovek-Maleck, A. E., and D. W. White. 2004. “Alternative approaches for elastic analysis and design of steel frames. I: Overview.” J. Struct. Eng. 130 (8): 1186–1196. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:8(1186).
Tokgoz, S., and C. Dundar. 2008. “Experimental tests on biaxially loaded concrete-encased composite columns.” Steel Compos. Struct. 8 (5): 423–438. https://doi.org/10.12989/scs.2008.8.5.423.
Virdi, K. S., and P. J. Dowling. 1973. “The ultimate strength of composite columns in biaxial bending.” Proc. Inst. Civ. Eng. 55 (1): 251–272. https://doi.org/10.1680/iicep.1973.4958.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Aug 25, 2020
Accepted: Mar 16, 2021
Published online: May 22, 2021
Published in print: Aug 1, 2021
Discussion open until: Oct 22, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- You-Xin Ma, Kang Hai Tan, Derivation of a normalised failure surface for square CECFST columns embedded with circular steel tube: A unified approach, Thin-Walled Structures, 10.1016/j.tws.2022.109694, 179, (109694), (2022).