Abstract
To promote the development of cross-laminated timber (CLT) structures, the Japanese Government Notifications on Structural Design of CLT Buildings (GN 611) was issued in 2016. In GN 611, three types of platform-framing CLT structures were classified in the simple calculation method of Route-1. Compared with a platform-framing structure, which has been clarified in GN 611, a balloon-framing structure is superior in shortening the construction period and reducing the number of CLT panels and metal connectors. To study the seismic properties of balloon-framing CLT structures and develop new structures for a CLT building, four full-scale, 3-story CLT structures were tested under quasi-static cyclic loading: Specimen 1 was a platform-framing structure with narrow wall panels; Specimen 2 was a balloon-framing structure with continuous wall panels; Specimen 3 a was platform-framing structure with wide wall panels; and Specimen 4 was a balloon-framing structure with continuous wall panels and glulam beams. In this study, experiments were conducted, and the seismic performance of the balloon- and platform-framing CLT structures were evaluated and compared. The test results indicated that the seismic properties of Specimens 1, 2, and 3 were similar and that the design method of Specimen 1, as specified in GN 611, was applicable for Specimens 2 and 3. Specimen 4 exhibited higher lateral load resistance than the other three specimens. The performance of Specimen 4 depended on the moment-resisting performance of the glulam beam and CLT wall joint. In this case, the moment-resisting performance obtained through the experiment was significantly higher than the predicted performance.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This research was supported by the National Institute for Land and Infrastructure Management of Japan (NILIM). The experiments were conducted at the Building Research Institute of Japan. The first author was supported by the China Scholarship Council (CSC). All contributions to this research are gratefully acknowledged.
References
Amini, M. O., J. W. van de Lindt, D. Rammer, S. Pei, P. Line, and M. Popovski. 2018. “Systematic experimental investigation to support the development of seismic performance factors for cross laminated timber shear wall systems.” Eng. Struct. 172 (Oct): 392–404. https://doi.org/10.1016/j.engstruct.2018.06.021.
Brandner, R. 2013. “Production and technology of cross laminated timber (CLT): A state-of-the-art report.” In Vol. 21 of Proc., Focus Solid Timber Solutions-European Conf. on Cross Laminated Timber (CLT), 3–36. Bath, UK: Univ. of Bath.
Brandner, R., G. Flatscher, A. Ringhofer, G. Schickhofer, and A. Thiel. 2016. “Cross laminated timber (CLT): Overview and development.” Eur. J. Wood Wood Prod. 74 (3): 331–351. https://doi.org/10.1007/s00107-015-0999-5.
Ceccotti, A., C. Sandhaas, M. Okabe, M. Yasumura, C. Minowa, and N. Kawai. 2013. “Sofie project—3D shaking table test on a seven-storey full-scale cross-laminated timber building.” Earthquake Eng. Struct. Dyn. 42 (13): 2003–2021. https://doi.org/10.1002/eqe.2309.
Committee of CLT Manual. 2016. Design and construction manual for CLT buildings. [In Japanese.] Tokyo: Japan Housing and Wood Technology Center.
Izzi, M., D. Casagrande, S. Bezzi, D. Pasca, M. Follesa, and R. Tomasi. 2018. “Seismic behavior of cross-laminated timber structures: A state-of-the-art review.” Eng. Struct. 170 (Sep): 42–52. https://doi.org/10.1016/j.engstruct.2018.05.060.
MAFF (Ministry of Agriculture, Forestry and Fishery). 2013. Japan agriculturalstandard—Notification 336 No. 3079. [In Japanese.] Tokyo: Japan Agricultural Standard Association.
MAFF (Ministry of Agriculture, Forestry and Fishery). 2018. Japan agricultural standard—Notification 338 No. 683. [In Japanese.] Tokyo: Japan Agricultural Standard Association.
Miyake, T., M. Yasumura, N. Kawai, H. Isoda, M. Koshihara, T. Tsuchimoto, Y. Araki, and T. Nakagawa. 2016. “Structural possibility of CLT panel constructions in high seismic area.” In Proc., Wood Conf. on Timber Engineering (WCTE), 3493–3500. Vienna, Austria: Vienna Univ. of Technology.
MLITT (Ministry of Land, Infrastructure, Transport and Tourism). 1980. The building standard law—Notification no. 1793. [In Japanese.] Tokyo: Architectural Institute of Japan.
MLITT (Ministry of Land, Infrastructure, Transport and Tourism). 2008. Allowable stress design method of conventional buildings. [In Japanese.] Tokyo: Japan Housing and Wood Technology Center.
MLITT (Ministry of Land, Infrastructure, Transport and Tourism). 2016. Japanese Government notifications on structural design of CLT buildings no. 611. Tokyo: Architectural Institute of Japan.
Popovski, M., and I. Gavric. 2016. “Performance of a 2-story CLT house subjected to lateral loads.” J. Struct. Eng. 142 (4): E4015006. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001315.
Popovski, M., and E. Karacabeyli. 2012. “Seismic behaviour of cross-laminated timber structures.” In Proc., 12th Wood Conf. on Timber Engineering (WCTE2012). Auckland, New Zealand: New Zealand Timber Design Society.
Popovski, M., J. Schneider, and M. Schweinsteiger. 2010. “Lateral load resistance of cross laminated wood panels.” In Proc., 11th Wood Conf. on Timber Engineering (WCTE2010). Trento, Italy: National Research Council-Trees and Timber Institute.
Sakurai, I., T. Miyake, M. Yasumura, N. Kawai, H. Isoda, and T. Nakagawa. 2016. “Shaking table tests for study on structural design method of building construction with cross laminated timber. Part 21: Outline of the shaking table tests and test specimens.” [In Japanese.] In Proc., Architecture Institute of Japan. Tokyo: Architecture Institute of Japan.
Sato, M., H. Isoda, Y. Araki, T. Nakagawa, N. Kawai, and T. Miyake. 2019. “A seismic behavior and numerical model of narrow paneled cross-laminated timber building.” Eng. Struct. 179 (Jan): 9–22. https://doi.org/10.1016/j.engstruct.2018.09.054.
SYNEGIC. 2016a. “Home page.” Accessed January 12, 2020. http://www.synegic.co.jp/product/index2.html.
SYNEGIC. 2016b. “Technical data sheet.” Accessed January 12, 2020. https://kensetsu.ipros.jp/catalog/detail/330847?hub=60+4175239.
van de Lindt, J. W., J. Furley, M. O. Amini, S. Pei, G. Tamagnone, A. R. Barbosa, D. Rammer, P. Line, M. Fragiacomo, and M. Popovski. 2019. “Experimental seismic behavior of a two-story CLT platform building.” Eng. Struct. 183 (Mar): 408–422. https://doi.org/10.1016/j.engstruct.2018.12.079.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Feb 29, 2020
Accepted: Aug 28, 2020
Published online: Nov 24, 2020
Published in print: Feb 1, 2021
Discussion open until: Apr 24, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.