Simplified Dynamic Assessment for Reinforced-Concrete Structures Subject to Column Removal Scenarios
Publication: Journal of Structural Engineering
Volume 146, Issue 12
Abstract
A simple yet effective method for dynamic assessment of building structures subject to a sudden column removal is presented. An equivalent single-degree-of-freedom (SDOF) dynamic model to predict the realistic dynamic response of the structure after column removal is proposed. This model considers nonzero initial conditions that are likely to occur under blast loading and structural damping, which can significantly affect the dynamic performance under large deformations. Based on the proposed method, dynamic response of a structure subject to a specific dynamic loading released from column removal is analytically solved. Four sets of physical tests of structures subject to column removal, including quasi-static tests and the corresponding multiple free-fall dynamic tests, are employed to verify the proposed assessment method. In addition, the classical pseudostatic assessment is conducted for the test series and compared with the present method. Results obtained from the verification study demonstrate the accuracy and effectiveness of the proposed simplified dynamic assessment. In addition, the proposed equivalent SDOF method is simple and can be easily implemented with a spreadsheet by practicing engineers. This advantage allows the proposed method to be employed as a routine design procedure for predicting the dynamic performance of structures subject to column removal.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code generated or used during the study are available from the corresponding author by request.
Acknowledgments
This study was financially supported by the research grant GPC: MHA 191/9/1/345 provided by Ministry of Home Affairs, Singapore. The authors appreciate the financial support by the organization. The essential experimental data shared by Dr. Namyo Slim Lim and Dr. Anh Tuan Pham is greatly acknowledged.
References
Adam, J. M., F. Parisi, J. Sagaseta, and X. Lu. 2018. “Research and practice on progressive collapse and robustness of building structures in the 21st century.” Eng. Struct. 173 (Oct): 122–149. https://doi.org/10.1016/j.engstruct.2018.06.082.
ATC (Applied Technology Council). 1996. Seismic evaluation and retrofit of concrete buildings. ATC-40. Redwood City, CA: ATC.
Baker, J. W., M. Schubert, and M. H. Faber. 2008. “On the assessment of robustness.” Struct. Saf. 30 (3): 253–267. https://doi.org/10.1016/j.strusafe.2006.11.004.
Bao, Y., S. K. Kunnath, S. El-Tawil, and H. S. Lew. 2008. “Macromodel-based simulation of progressive collapse: RC frame structures.” J. Struct. Eng. 134 (7): 1079–1091. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:7(1079).
Blandon, C. A., and M. J. N. Priestley. 2005. “Equivalent viscous damping equations for direct displacement based design.” Supplement, J. Earthquake Eng. 9 (S2): 257–278. https://doi.org/10.1142/S1363246905002390.
Bontempi, F., K. Gkoumas, and S. Arangio. 2008. “Systemic approach for the maintenance of complex structural systems.” Struct. Infrastruct. Eng. 4 (2): 77–94. https://doi.org/10.1080/15732470601155235.
Brunesi, E., and F. Parisi. 2017. “Progressive collapse fragility models of European reinforced concrete framed buildings based on pushdown analysis.” Eng. Struct. 152 (Dec): 579–596. https://doi.org/10.1016/j.engstruct.2017.09.043.
Chopra, A. K. 2007. Dynamics of structures: Theory and application to earthquake engineering. Upper Saddle River, NJ: Prentice Hall.
DoD (Department of Defense). 2009. Design of buildings to resist progressive collapse. Washington, DC: DoD.
Dusenberry, D. O., and R. O. Hamburger. 2006. “Practical means for energy-based analyses of disproportionate collapse potential.” J. Perform. Constr. Facil. 20 (4): 336–348. https://doi.org/10.1061/(ASCE)0887-3828(2006)20:4(336).
Ellingwood, B., and E. V. Leyendecker. 1978. “Approaches for design against progressive collapse.” J. Struct. Eng. 104 (3): 413–423.
Fallon, C. T., S. E. Quiel, and C. J. Naito. 2016. “Uniform pushdown approach for quantifying building-frame robustness and the consequence of disproportionate collapse.” J. Perform. Constr. Facil. 30 (6): 04016060. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000912.
Fascetti, A., S. K. Kunnath, and N. Nisticò. 2015. “Robustness evaluation of RC frame buildings to progressive collapse.” Eng. Struct. 86 (Mar): 242–249. https://doi.org/10.1016/j.engstruct.2015.01.008.
Georgakopoulos, P. J. 2005. “An overview of progressive collapse in structural systems.” Doctoral dissertation, Dept. of Civil and Environmental Engineering, Massachusetts Institute of Technology.
GSA (General Service Administration). 2013. Alternative path analysis & design guidelines for progressive collapse resistance. Washington, DC: GSA.
Izzuddin, B. A., A. G. Vlassis, A. Y. Elghazouli, and D. A. Nethercot. 2008. “Progressive collapse of multi-storey buildings due to sudden column loss—Part I: Simplified assessment framework.” Eng. Struct. 30 (5): 1308–1318. https://doi.org/10.1016/j.engstruct.2007.07.011.
Khandelwal, K., and S. El-Tawil. 2011. “Pushdown resistance as a measure of robustness in progressive collapse.” Eng. Struct. 33 (9): 2653–2661. https://doi.org/10.1016/j.engstruct.2011.05.013.
Kowalsky, M. J., and J. P. Ayers. 2002. Investigation of equivalent viscous damping for direct displacement-based design. Berkeley, CA: Univ. of California, Berkeley.
Lim, N. S., C. K. Lee, and K. H. Tan. 2015. “Experimental study on 2-D RC frame with middle column removed under progressive collapse.” In Proc., Fib Symp. Lausanne, Switzerland: International Federation for Structural Concrete.
Liu, C., T. C. Fung, and K. H. Tan. 2016. “Dynamic performance of flush end-plate beam-column connections and design applications in progressive collapse.” J. Struct. Eng. 142 (1): 04015074. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001329.
Liu, T., and Q. L. Zhang. 2016. “AP/VP specific equivalent viscous damping model for base-isolated buildings characterized by SDOF systems.” Eng. Struct. 111 (Mar): 36–47. https://doi.org/10.1016/j.engstruct.2015.12.024.
Maes, M. A., K. E. Fritzsons, and S. Glowienka. 2006. “Structural robustness in the light of risk and consequence analysis.” Struct. Eng. Int. 16 (2): 101–107. https://doi.org/10.2749/101686606777962468.
Pham, A. T. 2017. Responses of reinforced concrete structures under progressive collapse subjected to different loading methods and loading rates. Singapore: Nanyang Technological Univ.
Pham, A. T., and K. H. Tan. 2019. “Static and dynamic responses of reinforced concrete structures under sudden column removal scenario subjected to distributed loading.” J. Struct. Eng. 145 (1): 04018235. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002214.
Pham, X. D., and K. H. Tan. 2013. “Experimental study of beam-slab substructures subjected to a penultimate-internal column loss.” Eng. Struct. 55 (Oct): 2–15.
Qian, K., and B. Li. 2012. “Dynamic performance of RC beam-column substructures under the scenario of the loss of a corner column—Experimental results.” Eng. Struct. 42 (Sep): 154–167.
Qian, K., and B. Li. 2013. “Performance of three-dimensional reinforced concrete beam-column substructures under loss of a corner column scenario.” J. Struct. Eng. 139 (4): 584–594. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000630.
Sadek, F., J. A. Main, H. S. Lew, and Y. Bao. 2011. “Testing and analysis of steel and concrete beam-column assemblies under a column removal scenario.” J. Struct. Eng. 137 (9): 881–892. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000422.
Sasani, M., A. Kazemi, S. Sagiroglu, and S. Forest. 2011. “Progressive collapse resistance of an actual 11-story structure subjected to severe initial damage.” J. Struct. Eng. 137 (9): 893–902. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000418.
Shi, Y., Z. X. Li, and H. Hao. 2010. “A new method for progressive collapse analysis of RC frames under blast loading.” Eng. Struct. 32 (6): 1691–1703. https://doi.org/10.1016/j.engstruct.2010.02.017.
Starossek, U., and M. Haberland. 2011. “Approaches to measures of structural robustness.” Struct. Infrastruct. Eng. 7 (7–8): 625–631. https://doi.org/10.1080/15732479.2010.501562.
Stephen, D., D. Lam, J. Forth, J. Ye, and K. D. Tsavdaridis. 2018. “An evaluation of modelling approaches and column removal time on progressive collapse of building.” J. Constr. Steel Res. 153 (Feb): 243–253. https://doi.org/10.1016/j.jcsr.2018.07.019.
Tay, C. G., C. G. Koh, and J. Y. R. Liew. 2016. “Efficient progressive collapse analysis for robustness evaluation of buildings experiencing column removal.” J. Constr. Steel Res. 122 (Jul): 395–408. https://doi.org/10.1016/j.jcsr.2016.04.010.
Tsai, M. H., and B. H. Lin. 2008. “Investigation of progressive collapse resistance and inelastic response for an earthquake-resistant RC building subjected to column failure.” Eng. Struct. 30 (12): 3619–3628. https://doi.org/10.1016/j.engstruct.2008.05.031.
Xu, G., and B. R. Ellingwood. 2011. “Probabilistic robustness assessment of pre-Northridge steel moment resisting frames.” J. Struct. Eng. 137 (9): 925–934. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000403.
Yang, B., and K. H. Tan. 2013. “Experimental tests of different types of bolted steel beam-column joints under a central-column-removal scenario.” Eng. Struct. 54 (Sep): 112–130. https://doi.org/10.1016/j.engstruct.2013.03.037.
Yi, W. J., Q. F. He, Y. Xiao, and S. K. Kunnath. 2008. “Experimental study on progressive collapse-resistant behavior of reinforced concrete frame structures.” ACI Struct. J. 105 (4): 433–439.
Yu, J., and Y. Q. Guo. 2016. “Nonlinear SDOF model for dynamic response of structures under progressive collapse.” J. Eng. Mech. 142 (11): 04015103. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001165.
Yu, J., T. Rinder, A. Stolz, K. H. Tan, and W. Riedel. 2014. “Dynamic progressive collapse of an RC assemblage induced by contact detonation.” J. Struct. Eng. 140 (6): 04014014. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000959.
Yu, J., and K. H. Tan. 2013. “Experimental and numerical investigation on progressive collapse resistance of reinforced concrete beam column sub-assemblages.” Eng. Struct. 55 (Oct): 90–106. https://doi.org/10.1016/j.engstruct.2011.08.040.
Yu, J., and K. H. Tan. 2014. “Analytical model for the capacity of compressive arch action of reinforced concrete sub-assemblages.” Mag. Concr. Res. 66 (3): 109–126. https://doi.org/10.1680/macr.13.00217.
Yu, J., C. Yin, and Y. Guo. 2017. “Nonlinear SDOF model for progressive collapse responses of structures with consideration of viscous damping.” J. Eng. Mech. 143 (9): 04017108. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001339.
Zhang, Y. Q., J. X. Gong, Q. Zhang, and S. Han. 2017. “Equivalent damping ratio model of flexure-shear critical RC columns.” Eng. Struct. 130 (Jan): 52–66. https://doi.org/10.1016/j.engstruct.2016.10.003.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Dec 4, 2019
Accepted: Jun 16, 2020
Published online: Sep 25, 2020
Published in print: Dec 1, 2020
Discussion open until: Feb 25, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.