Numerical Studies on the Seismic Performances of RC Two-Column Bent Bridges with Self-Centering Energy Dissipation Braces
Publication: Journal of Structural Engineering
Volume 146, Issue 4
Abstract
Bridges may suffer large residual displacements after strong earthquakes. These large residual displacements may increase the reinforcement cost and even lead to the collapse of the bridge. Various self-centering energy dissipation braces (SCEBs) have been proposed to be installed to the frames to reduce the adverse residual displacement, and extensive numerical and experimental investigations have been performed to examine the effectiveness of these devices. However, previous studies mainly focused on the application of the SCEB to the steel frames. Very limited studies investigated the seismic performances of a reinforced concrete (RC) bridge supported by the two-column bents with SCEBs. This paper presents numerical studies on the seismic performances of an RC two-column bent bridge equipped with SCEBs. The hysteretic behavior of the RC two-column bent with an SCEB is firstly modeled and validated by the experimental data. The bent with the SCEB model is then applied to a whole bridge to calculate seismic responses of the bridge. The influences of the key parameters of the SCEB on the seismic responses of the bridge are systematically investigated through parametric studies. This study can provide an insightful basis for the design of RC two-column bent bridges with SCEBs to achieve a desirable seismic performance.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the partial support from the National Key Research Program of China (No. 2017YFE0103000), the Beijing Municipal Education Commission (No. IDHT), and the National Science Foundation of China (No. 51421005, No. 51578022, and No. 51778023).
References
Alam, M. S., M. A. Youssef, and M. Nehdi. 2007. “Utilizing shape memory alloys to enhance the performance and safety of civil infrastructure: A review.” Can. J. Civ. Eng. 34 (9): 1075–1086. https://doi.org/10.1139/l07-038.
Andrawes, B., M. Shin, and N. Wierschem. 2010. “Active confinement of reinforced concrete bridge columns using shape memory alloys.” J. Bridge Eng. 15 (1): 81–89. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000038.
Araki, Y., T. Endo, T. Omori, Y. Sutou, Y. Koetaka, R. Kainuma, and K. Ishida. 2011. “Potential of superelastic Cu–Al–Mn alloy bars for seismic applications.” Earthquake Eng. Struct. Dyn. 40 (1): 107–115. https://doi.org/10.1002/eqe.1029.
Araki, Y., K. C. Shrestha, N. Maekawa, Y. Koetaka, T. Omori, and R. Kainuma. 2016. “Shaking table tests of steel frame with superelastic Cu–Al–Mn SMA tension braces.” Earthquake Eng. Struct. Dyn. 45 (2): 297–314. https://doi.org/10.1002/eqe.2659.
ASCE. 2005. Minimum design loads for buildings and other structures. ASCE 7-05. Reston, VA: ASCE.
Bazaez, R., and P. Dusicka. 2016. “Cyclic behavior of reinforced concrete bridge bent retrofitted with buckling restrained braces.” Eng. Struct. 119 (Jul): 34–48. https://doi.org/10.1016/j.engstruct.2016.04.010.
Bi, K., and H. Hao. 2015. “Modelling of shear keys in bridge structures under seismic loads.” Soil Dyn. Earthquake Eng. 74 (Jul): 56–68. https://doi.org/10.1016/j.soildyn.2015.03.013.
Billah, A. M., and M. S. Alam. 2012. “Seismic performance of concrete columns reinforced with hybrid shape memory alloy (SMA) and fiber reinforced polymer (FRP) bars.” Constr. Build. Mater. 28 (1): 730–742. https://doi.org/10.1016/j.conbuildmat.2011.10.020.
Cheng, X., J. Erochko, and D. Lau. 2017. “Improving the seismic performance of existing bridge structures using self-centering dampers.” In Proc., 16th World Conf. on Earthquake Engineering. Santiago, Chile: National Information Centre for Earthquake Engineering.
Christopoulos, C., R. Tremblay, H. J. Kim, and M. Lacerte. 2008. “Self-centering energy dissipative bracing system for the seismic resistance of structures: Development and validation.” J. Struct. Eng. 134 (1): 96–107. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:1(96).
Cruz Noguez, C. A., and M. S. Saiidi. 2012. “Shake table studies of a 4-span bridge model with advanced materials.” J. Struct. Eng. 138 (2): 183–192. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000457.
Deierlein, G., H. Krawinkler, X. Ma, M. Eatherton, J. Hajjar, T. Takeuchi, K. Kasai, and M. Midorikawa. 2011. “Earthquake resilient steel braced frames with controlled rocking and energy dissipating fuses.” Steel Constr. 4 (3): 171–175. https://doi.org/10.1002/stco.201110023.
DesRoches, R., and M. Delemont. 2002. “Seismic retrofit of simply supported bridges using shape memory alloys.” Eng. Struct. 24 (3): 325–332. https://doi.org/10.1016/S0141-0296(01)00098-0.
Dong, H. H., X. L. Du, Q. Han, K. M. Bi, and H. Hao. 2019. “Hysteretic performance of RC double-column bridge piers with self-centering buckling-restrained braces.” Bull. Earthquake Eng. 17 (6): 3255–3281. https://doi.org/10.1007/s10518-019-00586-4.
Dong, H. H., X. L. Du, Q. Han, H. Hao, K. M. Bi, and X. Wang. 2017. “Performance of an innovative self-centering buckling restrained brace for mitigating seismic responses of bridge structures with double-column piers.” Eng. Struct. 148 (Oct): 47–62. https://doi.org/10.1016/j.engstruct.2017.06.011.
Eatherton, M. R., L. A. Fahnestock, and D. J. Miller. 2014a. “Computational study of self-centering buckling-restrained braced frame seismic performance.” Earthquake Eng. Struct. Dyn. 43 (13): 1897–1914. https://doi.org/10.1002/eqe.2428.
Eatherton, M. R., X. Ma, H. Krawinkler, G. G. Deierlein, and J. F. Hajjar. 2014b. “Quasi-static cyclic behavior of controlled rocking steel frames.” J. Struct. Eng. 140 (11): 04014083. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001005.
El-Bahey, S., and M. Bruneau. 2012. “Bridge piers with structural fuses and bi-steel columns. I: Experimental testing.” J. Bridge Eng. 17 (1): 25–35. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000234.
Erochko, J., C. Christopoulos, and R. Tremblay. 2015. “Design and testing of an enhanced-elongation telescoping self-centering energy-dissipative brace.” J. Struct. Eng. 141 (6): 04014163. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001109.
Erochko, J., C. Christopoulos, R. Tremblay, and H. Choi. 2011. “Residual drift response of SMRFs and BRB frames in steel buildings designed according to ASCE 7-05.” J. Struct. Eng. 137 (5): 589–599. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000296.
Erochko, J., C. Christopoulos, R. Tremblay, and H. J. Kim. 2013. “Shake table testing and numerical simulation of a self-centering energy dissipative braced frame.” Earthquake Eng. Struct. Dyn. 42 (11): 1617–1635. https://doi.org/10.1002/eqe.2290.
FEMA. 2009. Quantification of building seismic performance factors. Washington, DC: FEMA.
Garlock, M. E., and J. Li. 2008. “Steel self-centering moment frames with collector beam floor diaphragms.” J. Constr. Steel Res. 64 (5): 526–538. https://doi.org/10.1016/j.jcsr.2007.10.006.
Guerrini, G., J. I. Restrepo, M. Massari, and A. Vervelidis. 2015. “Seismic behavior of posttensioned self-centering precast concrete dual-shell steel columns.” J. Struct. Eng. 141 (4): 04014115. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001054.
Han, Q., Z. L. Jia, K. Xu, Y. L. Zhou, and X. L. Du. 2019. “Hysteretic behavior investigation of self-centering double-column rocking piers for seismic resilience.” Eng. Struct. 188 (Jun): 218–232. https://doi.org/10.1016/j.engstruct.2019.03.024.
Holden, T., J. Restrepo, and J. B. Mander. 2003. “Seismic performance of precast reinforced and prestressed concrete walls.” J. Struct. Eng. 129 (3): 286–296. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:3(286).
Japan Road Association. 2002. Design specification of highway bridges, part V-seismic design. Tokyo: Maruzen.
Jeong, H. I., J. I. Sakai, S. A. Mahin, and PEER Center (Pacific Earthquake Engineering Research Center). 2008. Shaking table tests and numerical investigation of self-centering reinforced concrete bridge columns. Berkeley, CA: Pacific Earthquake Engineering Research Center.
Li, C., K. Bi, H. Hao, X. Zhang, and D. Van Tin. 2019. “Cyclic test and numerical study of precast segmental concrete columns with BFRP and TEED.” Bull. Earthquake Eng. 17 (6): 3475–3494. https://doi.org/10.1007/s10518-019-00597-1.
Li, C., H. Hao, X. Zhang, and K. Bi. 2018. “Experimental study of precast segmental columns with unbonded tendons under cyclic loading.” Adv. Struct. Eng. 21 (3): 319–334. https://doi.org/10.1177/1369433217717119.
Ma, H., and M. C. Yam. 2011. “Modelling of a self-centring damper and its application in structural control.” J. Constr. Steel Res. 67 (4): 656–666. https://doi.org/10.1016/j.jcsr.2010.11.014.
Mander, J. B., M. J. Priestley, and R. Park. 1988. “Theoretical stress-strain model for confined concrete.” J. Struct. Eng. 114 (8): 1804–1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804).
Marriott, D., S. Pampanin, and A. Palermo. 2009. “Quasi-static and pseudo-dynamic testing of unbonded post-tensioned rocking bridge piers with external replaceable dissipaters.” Earthquake Eng. Struct. Dyn. 38 (3): 331–354. https://doi.org/10.1002/eqe.857.
Miller, D. J., L. A. Fahnestock, and M. R. Eatherton. 2012. “Development and experimental validation of a nickel–titanium shape memory alloy self-centering buckling-restrained brace.” Eng. Struct. 40 (Jul): 288–298. https://doi.org/10.1016/j.engstruct.2012.02.037.
MOHURD and AQSIQ (Ministry of Housing and Urban-Rural Development of the People’s Republic of China and General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China). 2010. Code for seismic design of buildings. GB 50011. Beijing: China Architecture and Building Press.
Nakashoji, B., and M. S. Saiidi. 2014. Seismic performance of square nickel-titanium reinforced ECC columns with headed couplers. Reno, NV: Center for Civil Engineering Earthquake Research, Dept. of Civil and Environmental Engineering, Univ. of Nevada.
Ozbulut, O. E., and S. Hurlebaus. 2012. “Application of an SMA-based hybrid control device to 20-story nonlinear benchmark building.” Earthquake Eng. Struct. Dyn. 41 (13): 1831–1843. https://doi.org/10.1002/eqe.2160.
Qiu, C., and S. Zhu. 2017. “Shake table test and numerical study of self-centering steel frame with SMA braces.” Earthquake Eng. Struct. Dyn. 46 (1): 117–137. https://doi.org/10.1002/eqe.2777.
Rahman, M. A., and S. Sritharan. 2007. “Performance-based seismic evaluation of two five-story precast concrete hybrid frame buildings.” J. Struct. Eng. 133 (11): 1489–1500. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:11(1489).
Rahmzadeh, A., M. S. Alam, and R. Tremblay. 2018. “Analytical prediction and finite-element simulation of the lateral response of rocking steel bridge piers with energy-dissipating steel bars.” J. Struct. Eng. 144 (11): 04018210. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002216.
Ricles, J. M., R. Sause, M. M. Garlock, and C. Zhao. 2001. “Posttensioned seismic-resistant connections for steel frames.” J. Struct. Eng. 127 (2): 113–121. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:2(113).
Ruiz-García, J., and E. Miranda. 2006. “Residual displacement ratios for assessment of existing structures.” Earthquake Eng. Struct. Dyn. 35 (3): 315–336. https://doi.org/10.1002/eqe.523.
Saiidi, M. S., M. Tazarv, S. Varela, S. Bennion, M. L. Marsh, I. Ghorbani, and T. M. Murphy. 2017. Seismic evaluation of bridge columns with energy dissipating mechanisms, volume 1: Research overview and volume 2: Guidelines. Washington, DC: The National Academies Press.
Saiidi, M. S., and H. Wang. 2006. “Exploratory study of seismic response of concrete columns with shape memory alloys reinforcement.” ACI Mater. J. 103 (3): 436.
Sarti, F., A. Palermo, and S. Pampanin. 2016. “Fuse-type external replaceable dissipaters: Experimental program and numerical modeling.” J. Struct. Eng. 142 (12): 04016134. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001606.
Tazarv, M., and M. S. Saiidi. 2016. “Low-damage precast columns for accelerated bridge construction in high seismic zones.” J. Bridge Eng. 21 (3): 04015056. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000806.
Thonstad, T., I. M. Mantawy, J. F. Stanton, M. O. Eberhard, and D. H. Sanders. 2016. “Shaking table performance of a new bridge system with pretensioned rocking columns.” J. Bridge Eng. 21 (4): 04015079. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000867.
Wang, Y., L. Ibarra, and C. Pantelides. 2016. “Seismic retrofit of a three-span RC bridge with buckling restrained braces.” J. Bridge Eng. 21 (11): 04016073. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000937.
Xu, L. H., X. W. Fan, and Z. X. Li. 2016. “Development and experimental verification of a pre-pressed spring self-centering energy dissipation brace.” Eng. Struct. 127 (Nov): 49–61. https://doi.org/10.1016/j.engstruct.2016.08.043.
Xu, L. H., X. W. Fan, and Z. X. Li. 2017. “Cyclic behavior and failure mechanism of self-centering energy dissipation braces with pre-pressed combination disc springs.” Earthquake Eng. Struct. Dyn. 46 (7): 1065–1080. https://doi.org/10.1002/eqe.2844.
Xu, L. H., X. S. Xie, and Z. X. Li. 2018. “Development and experimental study of a self-centering variable damping energy dissipation brace.” Eng. Struct. 160 (Apr): 270–280. https://doi.org/10.1016/j.engstruct.2018.01.051.
Youssf, O., M. A. ElGawady, and J. E. Mills. 2015. “Displacement and plastic hinge length of FRP-confined circular reinforced concrete columns.” Eng. Struct. 101 (Oct): 465–476. https://doi.org/10.1016/j.engstruct.2015.07.026.
Zhao, L., K. Bi, H. Hao, and X. Li. 2017. “Numerical studies on the seismic responses of bridge structures with precast segmental columns.” Eng. Struct. 151 (Nov): 568–583. https://doi.org/10.1016/j.engstruct.2017.08.018.
Zhao, L., H. Hao, K. Bi, and X. Li. 2018. “Numerical study of the seismic responses of precast segmental column bridge under spatially varying ground motions.” J. Bridge Eng. 23 (12): 04018096. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001319.
Zhou, Z., Q. Xie, X. Lei, X. He, and S. Meng. 2015. “Experimental investigation of the hysteretic performance of dual-tube self-centering buckling-restrained braces with composite tendons.” J. Compos. Constr. 19 (6): 04015011. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000565.
Zhu, S., and Y. Zhang. 2007. “Seismic behavior of self-centring braced frame buildings with reusable hysteretic damping brace.” Earthquake Eng. Struct. Dyn. 36 (10): 1329–1346. https://doi.org/10.1002/eqe.683.
Zhu, S., and Y. Zhang. 2008. “Seismic analysis of concentrically braced frame systems with self-centering friction damping braces.” J. Struct. Eng. 134 (1): 121–131. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:1(121).
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Sep 17, 2018
Accepted: Oct 1, 2019
Published online: Feb 5, 2020
Published in print: Apr 1, 2020
Discussion open until: Jul 5, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.