Directionality Effect on Strength of Partial-Joint-Penetration Groove Weld Joints
Publication: Journal of Structural Engineering
Volume 146, Issue 4
Abstract
Partial-joint-penetration (PJP) groove weld is commonly used as an alternative to fillet weld when high-strength joints are needed. The majority of previous research on the effect of loading angle on the weld strength focuses on fillet welds, but not PJP welds. Both US specifications and Japan recommendations use a directional strength increase factor to determine the strength of fillet welds. However, these factors do not apply to PJP welds; also, US specifications, Japan recommendations, and European standards give different design criteria for PJP welds loaded with 90°. This paper presents results from a study that investigated the mechanical behavior of PJP welds under different loading angles. Results obtained from both finite-element analysis and experiments indicate that current US design practice is conservative when the directionality effect is ignored in calculating the strength of PJP welds.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful for the support of the Steel Structure Research and Education Promotion Program provided by the Japan Iron and Steel Federation. The Japan Student Services Organization (JASSO) scholarship and the financial support from the China Scholarship Council (Grant 201807000074) provided to Pengjun Luo are also gratefully acknowledged. This research was partially supported by Japan Society for the Promotion of Science (JSPS) Grant No. R2904 in the Program for Fostering Globally Talented Researchers.
References
AIJ (Architectural Institute of Japan). 2012. Recommendation for design of connections in steel structures. Tokyo: AIJ.
AISC. 1993. Load and resistance factor design specification for structural steel buildings. Chicago: AISC.
AISC. 2016. Specification for structural steel buildings. ANSI/AISC 360. Chicago: AISC.
AWS (American Welding Society). 2015. Structural welding code–Steel. ANSI/AWS D1.1/D1.1M. Miami: AWS.
Azuma, K., Y. Kurobane, T. Iwashita, and K. Dale. 2006. “Full-scale testing of beam-to-RHS column connections with partial joint penetration groove welded joints and assessment of safety from brittle fracture.” Weld. World 50 (5–6): 59–67. https://doi.org/10.1007/BF03266525.
Björk, T., J. Toivonen, and T. Nykänen. 2012. “Capacity of fillet welded joints made of ultrahigh strength steel.” Weld. World 56 (3): 71–84. https://doi.org/10.1007/BF03321337.
BRI and JISF (Building Research Institute and Japan Iron and Steel Federation). 2002. Final report on testing methods for the evaluation of steel structural performance. [In Japanese.] Tokyo: BRI and JISF.
Butler, L. J., and G. L. Kulak. 1971. “Strength of fillet welds as a function of direction of load.” Weld. J. 50 (5): 231s–234s.
CEN (European Committee for Standardization). 2005. Design of steel structures, part 1–8: Design of joints. Eurocode 3: EN 1993-1-8. Brussels, Belgium: CEN.
Dundu, M. 2014. “Effect of defects on the strength of welds.” J. Eng. Des. Technol. 12 (4): 410–422. https://doi.org/10.1108/JEDT-02-2012-0008.
Gagnon, D. P., and D. L. Kennedy. 1989. “Behaviour and ultimate tensile strength of partial joint penetration groove welds.” Can. J. Civ. Eng. 16 (3): 384–399. https://doi.org/10.1139/l89-062.
Grondin, G. Y., and R. G. Driver. 2003. Effect of loading angle on the behaviour of fillet welds. Edmonton, AB, Canada: Dept. of Civil and Environmental Engineering, Univ. of Alberta.
Kamtekar, A. G. 1982. “A new analysis of the strength of some simple fillet welded connections.” J. Constr. Steel Res. 2 (2): 33–45. https://doi.org/10.1016/0143-974X(82)90024-4.
Kamtekar, A. G. 1987. “The strength of inclined fillet welds.” J. Constr. Steel Res. 7 (1): 43–54. https://doi.org/10.1016/0143-974X(87)90033-2.
Kato, B., and K. Morita. 1974. “Strength of transverse fillet welded joints.” Weld. J. 53 (2): 59s–64s.
Khurshid, M., Z. Barsoum, and I. Barsoum. 2015. “Load carrying capacities of butt welded joints in high strength steels.” J. Eng. Mater. Technol. 137 (4): 041003. https://doi.org/10.1115/1.4030687.
Kurobane, Y., K. Azuma, and J. Y. M. Kumamoto. 2004. “Applicability of PJP groove welding to beam-column connections under seismic loads.” In Connections in steel structures V, 367–380. Amsterdam, Netherlands: Elsevier.
Lesik, D. F., and D. J. K. Kennedy. 1990. “Ultimate strength of fillet welded connections loaded in plane.” Can. J. Civ. Eng. 17 (1): 55–67. https://doi.org/10.1139/l90-008.
Li, C., G. Y. Grondin, and R. G. Driver. 2007. Reliability analysis of concentrically loaded fillet welded joints. Edmonton, AB, Canada: Dept. of Civil and Environmental Engineering, Univ. of Alberta.
Mellor, B. G., R. C. T. Rainey, and N. E. Kirk. 1999. “The static strength of end and T fillet weld connections.” Mater. Des. 20 (4): 193–205. https://doi.org/10.1016/S0261-3069(99)00027-8.
Miazga, G. S., and D. J. K. Kennedy. 1989. “Behaviour of fillet welds as a function of the angle of loading.” Can. J. Civ. Eng. 16 (4): 583–599. https://doi.org/10.1139/l89-089.
Miller, D. K. 2017. Design guide 21: Welded connections—A primer for engineers. 2nd ed. Chicago: AISC.
Ng, A. K. F., R. G. Driver, and G. Y. Grondin. 2002. Behaviour of transverse fillet welds. Edmonton, AB, Canada: Dept. of Civil and Environmental Engineering, Univ. of Alberta.
Shaw, S. M., K. Stillmaker, and A. M. Kanvinde. 2015. “Seismic response of partial-joint-penetration welded column splices in moment-resisting frames.” Eng. J. 52 (2): 87–108.
Stillmaker, K., A. Kanvinde, and C. Galasso. 2016. “Fracture mechanics-based design of column splices with partial joint penetration welds.” J. Struct. Eng. 142 (2): 04015115. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001380.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Apr 22, 2019
Accepted: Sep 10, 2019
Published online: Jan 29, 2020
Published in print: Apr 1, 2020
Discussion open until: Jun 29, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.