Shear Performance Evaluation of Reinforced Concrete Piers Subjected to Vehicle Collision
Publication: Journal of Structural Engineering
Volume 146, Issue 4
Abstract
In this study, finite element (FE) simulation is conducted to analyze the dynamic response and damage/failure characteristics of typical three-column reinforced concrete (RC) piers under vehicle collision, taking into account key variables such as vehicular kinetic energy, diameter of piers and hoops, axial compression ratio, foundation depth and engine mass, and others. Based on the simulation results, an improved formula is proposed for calculating the axial force increment of RC piers during impact. An analytical approach for evaluating the shear performance of RC piers under vehicle collision is developed by combining a formerly established truck collision model. Furthermore, a new type of equivalent static force regarding the shear failure of RC piers under vehicle collision is also proposed and used to criticize the effectiveness of the AASHTO code.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all of the data, models, or code generated or used during this study are available from the corresponding author by request. The specific items are as follows:
1.
All of the finite element models and simulation results, and
2.
All of the original data indicated in the figures.
Acknowledgments
This research received financial support from the National Natural Science Foundation of China (Grant Nos. 51608191 and 51808214), Hunan Provincial Natural Science Foundation of China (Grant No. 2018JJ3186), and the Scientific Research Fund of Hunan Provincial Education Department (Grant No. 16B090).
References
AASHTO. 1998. LRFD bridge design Specifications (SI units). Washington, DC: AASHTO.
AASHTO. 2016. LRFD bridge design specifications (Customary U.S. Units). Washington, DC: AASHTO.
Abdelkarim, O. I., and M. A. Elgawady. 2017. “Performance of bridge piers under vehicle collision.” Eng. Struct. 140 (Jun): 337–352. https://doi.org/10.1016/j.engstruct.2017.02.054.
Agrawal, A. K., G. Liu, and S. Alampalli. 2013. “Effects of truck impacts on bridge piers.” Adv. Mater. Res. 639–640 (Jan): 13–25. https://doi.org/10.4028/www.scientific.net/AMR.639-640.13.
AuYeung, S., and A. Alipour. 2016. “Evaluation of AASHTO suggested design values for reinforced concrete bridge piers under vehicle collisions.” Transp. Res. Rec. 2592 (1): 1–8. https://doi.org/10.3141/2592-01.
Biskinis, D. E., G. K. Roupakias, and M. N. Fardis. 2004. “Degradation of shear strength of reinforced concrete members with inelastic cyclic displacements.” ACI Struct. J. 101 (6): 773–783.
BSI (British Standards Institution). 2006. Eurocode1—Actions on structures—Part 1–7: General actions—Accidental actions. EN1991-1-7. Brussels, Belgium: CEN.
Buth, C. E., M. S. Brackin, W. F. Williams, and G. T. Fry. 2011. Collision loads on bridge piers: Phase 2. Report of guidelines for designing bridge piers and abutments for vehicle collisions. College Station, TX: Texas Transportation Institute.
Buth, C. E., W. F. Williams, M. S. Brackin, D. Lord, S. R. Geedipally, and A. Y. Abu-Odeh. 2010. Analysis of large truck collisions with bridge piers: Phase 1. Report of guidelines for designing bridge piers and abutments for vehicle collisions. College Station, TX: Texas Transportation Institute.
Chen, L., S. El-Tawil, and Y. Xiao. 2016a. “Reduced models for simulating collisions between trucks and bridge piers.” J. Bridge Eng. 21 (6): 04016020. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000810.
Chen, L., S. El-Tawil, and Y. Xiao. 2017. “Response spectrum-based method for calculating the reaction force of piers subjected to truck collisions.” Eng. Struct. 150 (1): 852–863. https://doi.org/10.1016/j.engstruct.2017.07.092.
Chen, L., and Y. Xiao. 2012. “Review of studies on vehicle anti-collision on bridge piers.” J. Highway Transp. Res. Dev. 29 (8): 140–148.
Chen, L., Y. Xiao, and S. El-Tawil. 2016b. “Impact tests of model RC columns by an equivalent truck frame.” J. Struct. Eng. 142 (5): 04016002. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001449.
Demartino, C., J. G. Wu, and Y. Xiao. 2017. “Response of shear-deficient reinforced circular RC columns under lateral impact loading.” Int. J. Impact Eng. 109 (Nov): 196–213. https://doi.org/10.1016/j.ijimpeng.2017.06.011.
Do, T. V., T. M. Pham, and H. Hao. 2018. “Dynamic responses and failure modes of bridge columns under vehicle collision.” Eng. Struct. 156 (1): 243–259. https://doi.org/10.1016/j.engstruct.2017.11.053.
El-Tawil, S., E. Severino, and P. Fonseca. 2005. “Vehicle collision with bridge piers.” J. Bridge Eng. 10 (3): 345–353. https://doi.org/10.1061/(ASCE)1084-0702(2005)10:3(345).
LS-DYNA. 2010. LS-DYNA keyword user’s manual: Version 971. Livermore, CA: Livermore Software Technology Corporation.
Malvar, L. J., and J. E. Crawford. 1998. Dynamic increase factors for concrete. Hueneme, CA: Naval Facilities Engineering Service Center Port.
Malvar, L. J., J. E. Crawford, J. W. Wesevich, and D. Simons. 1997. “A plasticity concrete material model for DYNA3D.” Int. J. Impact Eng. 19 (9–10): 847–873. https://doi.org/10.1016/S0734-743X(97)00023-7.
Miele, C. R., C. A. Plaxico, J. C. Kennedy, S. Simunovic, and N. Zisi. 2005. Heavy vehicle infrastructure asset interaction and collision. Knoxville, TN: National Transportation Research Center.
Mohan, P., D. Marzougui, and C. S. Kan. 2007. “Validation of a single unit truck model for roadside hardware impact.” Int. J. Veh. Syst. Model. Test. 2 (1): 1–15. https://doi.org/10.1504/IJVSMT.2007.011423.
Montejo, L. A., and M. J. Kowalsky. 2007. CUMBIA-Set of codes for the analysis of reinforced concrete Members-Theory and user guide. Raleigh, NC: North Carolina State Univ.
Sharma, H., P. Gardoni, and S. Hurlebaus. 2014. “Probabilistic demand model and performance-based fragility estimates for RC column subject to vehicle collision.” Eng. Struct. 74 (Sep): 86–95. https://doi.org/10.1016/j.engstruct.2014.05.017.
Sharma, H., P. Gardoni, and S. Hurlebaus. 2015. “Performance-based probabilistic capacity models and fragility estimates for RC columns subject to vehicle collision.” Comput.-Aided Civ. Inf. 30 (7): 555–569.
Sharma, H., S. Hurlebaus, and P. Gardoni. 2012. “Performance-based response evaluation of reinforced concrete columns subject to vehicle impact.” Int. J. Impact Eng. 43 (May): 52–62. https://doi.org/10.1016/j.ijimpeng.2011.11.007.
Symonds, P. S. 1967. Survey of methods of analysis for plastic deformation of structures under dynamic loading. Providence RI: Brown Univ. School of Engineering.
Tsang, H., and N. T. K. Lam. 2008. “Collapse of reinforced concrete column by vehicle impact.” Comput.-Aided Civ. Inf. 23 (6): 427–436. https://doi.org/10.1111/j.1467-8667.2008.00549.x.
Vecchio, C. D., M. D. Zoppo, M. D. Ludovico, G. M. Verderame, and A. Prota. 2017. “Comparison of available shear strength models for non-conforming reinforced concrete columns.” Eng. Struct. 148 (Oct): 312–327. https://doi.org/10.1016/j.engstruct.2017.06.045.
Zhou, D., R. Li, J. Wang, and C. Guo. 2017. “Study on impact behavior and impact force of bridge pier subjected to vehicle collision.” Shock Vib. 2017: 1–12. https://doi.org/10.1155/2017/7085392.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Jan 2, 2019
Accepted: Sep 3, 2019
Published online: Jan 24, 2020
Published in print: Apr 1, 2020
Discussion open until: Jun 24, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.