Displacement-Based Design of Hybrid RC–Timber Structure: Seismic Risk Assessment
Publication: Journal of Structural Engineering
Volume 145, Issue 11
Abstract
A cross-laminated timber (CLT) wall is a composite structural assembly with high strength and stiffness properties. In this study, the beneficial properties of this wall were used in designing a new CLT-reinforced concrete (RC) hybrid system building. The hybrid system consisted of an RC moment-resisting frame with CLT infill. The energy dissipation capacity of this system was further enhanced by using steel slit dampers as connectors between the CLT and RC beam. To facilitate the adoption of new technology in earthquake engineering applications, direct displacement-based design was used. The utility of the proposed system was illustrated on a six-story CLT-RC frame dual system. Performance of the proposed design method was shown by conducting nonlinear time history analyses with consideration of seismicity of Vancouver, Canada. The results indicated that the proposed CLT-RC hybrid system is capable of withstanding lateral forces due to intense seismic excitations.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the financial support through the Natural Sciences and Engineering Research Council of Canada (RGPIN-2014-05013) under the Discovery Grant programs.
References
ASCE. 2007. Seismic rehabilitation of existing buildings. ASCE/SEI 41-06. Reston, VA: ASCE.
Atkinson, G. M., and K. Goda. 2011. “Effects of seismicity models and new ground-motion prediction equations on seismic hazard assessment for four Canadian cities.” Bull. Seismol. Soc. Am. 101 (1): 176–189. https://doi.org/10.1785/0120100093.
Baker, J. W. 2011. “Conditional mean spectrum: Tool for ground-motion selection.” J. Struct. Eng. 137 (3): 322–331. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000215.
Basu, D., and P. R. M. Reddy. 2016. “A new metallic damper for seismic resilience: Analytical feasibility study.” Structures 7: 165–183. https://doi.org/10.1016/j.istruc.2016.06.011.
Bezabeh, M., S. Tesfamariam, M. Popovski, K. Goda, and S. F. Stiemer. 2017. “Seismic base shear modification factors for timber-steel hybrid structures: A collapse risk assessment approach.” J. Struct. Eng. 143 (10): 04017136. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001869.
Bezabeh, M. A., S. Tesfamariam, and S. F. Stiemer. 2016a. “Equivalent viscous damping for steel moment frames with cross laminated timber infill walls.” J. Struct. Eng. 142 (1): 04015080. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001316.
Bezabeh, M. A., S. Tesfamariam, S. F. Stiemer, M. Popovski, and E. Karacabeyli. 2016b. “Direct displacement based design of a novel hybrid structure: Steel moment-resisting frames with cross laminated timber infill walls.” Struct. Saf. 32 (3): 1565–1585. https://doi.org/10.1193/101514EQS159M.
Ceccotti, A. 2018. “New technologies for construction of massive buildings in seismic regions: The XLAM Case.” Struct. Eng. Int. 18 (2): 156–165. https://doi.org/10.2749/101686608784218680.
Chinese Code. 2009. Technical specifications for wood frame construction. DG/TJ08-2059. Shanghai, China: Chinese Code.
Cornell, A. C., F. Jalayer, and R. O. Hamburger. 2002. “Probabilistic basis for 2000 SAC federal emergency management agency steel moment frame guidelines.” J. Struct. Eng. 128 (4): 526–533. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:4(526).
CSA (Canadian Standard Association). 2014. Design of concrete structures. CSA-A23.3. Mississauga, Canada: CSA.
DeVall, R. H. 2003. “Background information for some of the proposed earthquake design provisions for the 2005 edition of the National Building Code of Canada.” Can. J. Civ. Eng. 30 (2): 279–286. https://doi.org/10.1139/l02-048.
Ellingwood, B. R., O. C. Celik, and K. Kinali. 2007. “Fragility assessment of building structural systems in mid America.” Earthquake Eng. Struct. Dyn. 36 (13): 1935–1952. https://doi.org/10.1002/eqe.693.
FEMA. 2000. Prestandard and commentary for the seismic rehabilitation of buildings. FEMA 356. Washington, DC: FEMA.
Foster, R. M., and M. H. Ramage. 2017. “Briefing: Super tall timber—Oakwood Tower.” Proc. Inst. Civ. Eng. Constr. Mater. 170 (3): 118–122. https://doi.org/10.1680/jcoma.16.00034.
Foster, R. M., T. P. S. Reynolds, and M. H. Ramage. 2016. “Proposal for defining a tall timber building.” J. Struct. Eng. 142 (12): 02516001. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001615.
Fragiacomo, M., B. Dujic, and I. Sustersic. 2011. “Elastic and ductile design of multi-storey massive wooden buildings under seismic actions.” Eng. Struct. 33 (11): 3043–3053. https://doi.org/10.1016/j.engstruct.2011.05.020.
Garcia, R., T. J. Sullivan, and G. D. Corte. 2010. “Development of a displacement-based design method for steel frame-RC wall buildings.” J. Earthquake Eng. 14 (2): 252–277. https://doi.org/10.1080/13632460902995138.
Goda, K., and G. M. Atkinson. 2011. “Seismic performance of wood-frame houses in south-western British Columbia.” Earthquake Eng. Struct. Dyn. 40 (8): 903–924. https://doi.org/10.1002/eqe.1068.
Hyndman, R. D., and G. C. Rogers. 2010. “Great earthquakes on Canada’s west coast: A review.” Can. J. Earth Sci. 47: 801–820.
Isoda, H., N. Kawai, M. Koshihara, and Y. Araki. 2017. “Timber–reinforced concrete core hybrid system: Shake table experimental test.” J. Struct. Eng. 143 (1): 04016152. https://doi.org/doi.org/10.1061/(ASCE)ST.1943-541X.0001631.
Lee, C. H., Y. K. Ju, J. K. Min, S. H. Lho, and S. D. Kim. 2015. “Non-uniform steel strip dampers subjected to cyclic loadings.” Eng. Struct. 99 (99): 192–204. https://doi.org/10.1016/j.engstruct.2015.04.052.
Loss, C., T. Tannert, and S. Tesfamariam. 2018. “State-of-the-art review of displacement-based seismic design of timber buildings.” Constr. Build. Mater. 191 (Dec): 481–497. https://doi.org/10.1016/j.conbuildmat.2018.09.205.
Luco, N., and P. Bazzurro. 2007. “Does amplitude scaling of ground motion records result in biased nonlinear structural drift responses?” Earthquake Eng. Struct. Dyn. 36 (13): 1813–1835. https://doi.org/doi.org/10.1002/eqe.695.
Madheswaran, J., and S. Tesfamariam. 2017. “Numerical analysis of steel slit damper under cyclic loading.” In Proc., 6th Int. Conf. on Engineering Materials and Mechanics. Montréal: Canadian Society for Civil Engineering.
Malekpour, S., H. Ghaarzadeh, and F. Dashti. 2013. “Direct displacement-based design of steel-braced reinforced concrete frames.” Struct. Des. Tall Spec. Build. 22 (18): 1422–1438. https://doi.org/10.1002/tal.1028.
Mitchell, D., R. Tremblay, E. Karacabeyli, P. Paultre, M. Saatcioglu, and D. L. Anderson. 2003. “Seismic force modification factors for the proposed 2005 edition of the National Building Code of Canada.” Can. J. Civ. Eng. 30 (2): 308–327.
Nielsen, N. N., and F. A. Imbeault. 1970. “Validity of various hysteretic systems.” In Proc., 3rd Japan Earthquake Engineering Symp., 707–714. Tokyo: Japanese Society of Soil Mechanics and Foundation Engineering.
Noguchi, H., and K. Uchida. 2004. “Finite element method analysis of hybrid structural frames with reinforced concrete columns and steel beams.” J. Struct. Eng. 130 (2): 328–335. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(328).
NRC (National Research Council of Canada). 2010. National building code of Canada 2010. Ottawa: NRC.
Priestley, M. J. N. 2000. “Performance based seismic design.” In Proc., 12th World Conf. on Earthquake Engineering. Upper Hutt, New Zealand: New Zealand Society for Earthquake Engineering.
Priestley, M. J. N., G. M. Calvi, and M. J. Kowalsky. 2007. Displacement-based seismic design of structures. Pavia, Italy: IUSS Press.
Ramage, M., M. Foster, S. Smith, K. Flanagan, and R. Bakker. 2017. “Super tall timber: Design research for the next generation of natural structure.” J. Archit. 22 (1): 104–122. https://doi.org/10.1080/13602365.2016.1276094.
Satake, K., K. Wang, and B. F. Atwater. 2003. “Fault slip and seismic moment of the 1700 Cascadia earthquake inferred from Japanese tsunami descriptions.” J. Geophys. Res. 108 (B11): 2535. https://doi.org/10.1029/2003JB002521.
Shen, Y. L., J. Schneider, S. Tesfamariam, S. F. Stiemer, and Z. Mu. 2013. “Hysteresis behavior of bracket connection in cross-laminated-timber shear walls.” Constr. Build. Mater. 48 (Nov): 980–991. https://doi.org/10.1016/j.conbuildmat.2013.07.050.
SOM (Skidmore, Owings, and Merrill) LLP. 2013. Timber tower research project: Final report. Chicago: WoodWorks Education Lab.
Stiemer, S., C. Dickof, and S. Tesfamariam. 2012. “Timber-steel hybrid systems: Seismic overstrength and ductility factors.” In Advances in steel concrete composite and hybrid structures. Singapore: Research Pub. Services.
Sullivan, T., N. Priestley, and G. M. Calvi. 2010. “Introduction to a model code for displacement-based seismic design.” In Advances in performance-based earthquake engineering: Geotechnical, geological and earthquake engineering, edited by M. Fardis. Dordrecht, Netherlands: Springer.
Sullivan, T. J. 2009. “Direct displacement-based design of a RC wall-steel EBF dual system with added dampers.” Bull. N. Z. Soc. Earthquake Eng. 44 (3): 167–178.
Sullivan, T. J., M. J. N. Priestley, and G. M. Calvi. 2006. “Direct displacement-based design of frame-wall structures.” Supplement, J. Earthquake Eng. 10 (S1): 91–124. https://doi.org/10.1080/13632460609350630.
Sustersic, I., and Dujic, B. 2014. “Seismic strengthening of existing concrete and masonry buildings with Crosslam timber panels.” In Materials and joints in timber structures, 713–723. Dordrecht, Netherlands: Springer.
Tesfamariam, S., S. F. Stiemer, M. Bezabeh, C. Goertz, M. Popovski, and K. Goda. 2015. Force based design guideline for timber-steel hybrid structures : Steel moment resisting frames with CLT infill walls. Kelowna, Canada: Univ. of British Columbia. https://doi.org/10.14288/1.0223405.
Tesfamariam, S., S. F. Stiemer, C. Dickof, and M. A. Bezabeh. 2014. “Seismic vulnerability assessment of hybrid steel-timber structure: Steel moment-resisting frames with CLT infill.” J. Earthquake Eng. 18 (6): 929–944.
Vargas, R., and M. Bruneau. 2009. “Analytical response and design of buildings with metallic structural fuses. I.” J. Struct. Eng. 135 (4): 386–393. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:4(386).
Wijesundara, K., and P. Rajeev. 2012. “Direct displacement-based seismic design of steel concentric braced frame structures.” Aust. J. Struct. Eng. 13 (3): 243–258. https://doi.org/10.7158/S11-135.2012.13.3.
Xia, C., and D. R. Hanson. 1992. “Influence of ADAS element parameters on building seismic response.” J. Struct. Eng. 118 (7): 1903–1918. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:7(1903).
Yazdinezhad, M. 2016. “Mitigating torsional irregularity using cross laminated timber-reinforced concrete hybrid system.” Electronic theses and dissertations, Civil Engineering, Univ. of British Columbia.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Jul 9, 2018
Accepted: Mar 8, 2019
Published online: Aug 27, 2019
Published in print: Nov 1, 2019
Discussion open until: Jan 27, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.