Response of Metallic Sandwich Panels to Blast Loads
Publication: Journal of Structural Engineering
Volume 145, Issue 12
Abstract
A considerable amount of research studies have demonstrated the capability of metallic sandwich panels in dissipating blast loading energy. Metallic sandwich panels dissipate blast energy through large plastic deformation of the core and plates, making them more effective than a single metallic plate of similar density. This study numerically evaluated the effectiveness of using woven shapes as a new core topology in sandwich panels for resisting blast loads. The results of the proposed woven shapes were compared to honeycomb and folded shapes to examine their effectiveness in blast mitigation. Numerical models were developed using ANSYS Autodyn software and were validated using available data in the literature. Eleven panels were studied: three honeycomb panels, five folded panels, and three woven panels. The effect of changing the front layer’s thickness and the back layer’s thickness was investigated. A new scenario was investigated where the same sandwich panels were exposed to a second blast load following the first one. Finally, the effect of changing the charge weight was studied where parameter charts for the honeycomb topology, folded topology, and woven topology were developed. The results show that woven shapes achieved the best energy dissipation capability compared to the honeycomb and folded shapes. Moreover, woven shapes achieved less back layer deflection than the folded shapes and more back layer deflection than the honeycomb shapes.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ahmed, S., and K. Galal. 2017. “Effectiveness of FRP sandwich panels for blast resistance.” J. Compos. Struct. 163 (Mar): 454–464. https://doi.org/10.1016/j.compstruct.2016.11.066.
Alberdi, R., J. Przywara, and K. Khandelwal. 2013. “Performance evaluation of sandwich panel systems for blast mitigation.” Eng. Struct. 56 (Nov): 2119–2130. https://doi.org/10.1016/j.engstruct.2013.08.021.
Century Dynamics. 2005. Autodyn: Theory manual revision 4.3. Concord, CA: Century Dynamics.
Côté, F. V., N. Deshpande, N. A. Fleck, and A. G. Evans. 2006. “The compressive and shear responses of corrugated and diamond lattice materials.” Int. J. Solids Struct. 43 (20): 6220–6242. https://doi.org/10.1016/j.ijsolstr.2005.07.045.
Cui, X., L. Zhao, Z. Wang, H. Zhao, and D. Fang. 2012. “Dynamic response of metallic lattice sandwich structures to impulsive loading.” Int. J. Impact Eng. 43 (May): 1–5. https://doi.org/10.1016/j.ijimpeng.2011.11.004.
Dharmasena, K., D. Queheillalt, H. Wadley, P. Dudt, Y. Chen, D. Knight, A. G. Evans, and V. S. Deshpande. 2010. “Dynamic compression of metallic sandwich structures during planar impulsive loading in water.” Eur. J. Mech. Solids 29 (1): 56–67. https://doi.org/10.1016/j.euromechsol.2009.05.003.
Fleck, N., and V. Deshpande. 2004. “The resistance of clamped sandwich beams to shock loading.” J. Appl. Mech. 71 (3): 386–401. https://doi.org/10.1115/1.1629109.
Hazell, P. J., C. Beveridge, K. Groves, and G. Appleby-Thomas. 2010. “The shock compression of microorganism-loaded broths and emulsions: Experiments and simulations.” Int. J. Impact Eng. 37 (4): 433–440. https://doi.org/10.1016/j.ijimpeng.2009.08.007.
Karagiozova, D., G. Nurick, and G. Langdon. 2009. “Behaviour of sandwich panels subject to intense air blasts—Part 2: Numerical simulation.” Compos. Struct. 91 (4): 442–450. https://doi.org/10.1016/j.compstruct.2009.04.010.
Li, X., Z. Wang, F. Zhu, G. Wu, and L. Zhao. 2014. “Response of aluminium corrugated sandwich panels under air blast loadings: Experiment and numerical simulation.” Int. J. Impact Eng. 65 (Mar): 79–88. https://doi.org/10.1016/j.ijimpeng.2013.11.002.
Liang, Y., A. V. Spuskanyuk, S. E. Flores, D. R. Hayhurst, J. W. Hutchinson, R. M. McMeeking, and A. G. Evans. 2007. “The response of metallic sandwich panels to water blast.” J. Appl. Mech. 74 (1): 81–99. https://doi.org/10.1115/1.2178837.
McShane, G., V. Deshpande, and N. Fleck. 2007. “The underwater blast resistance of metallic sandwich beams with prismatic lattice cores.” J. Appl. Mech. 74 (2): 352–364. https://doi.org/10.1115/1.2198549.
Nayak, S., A. Singh, A. Belegundu, and C. Yen. 2013. “Process for design optimization of honeycomb core sandwich panels for blast load mitigation.” Struct. Multidiscip. Optim. 47 (5): 749–763. https://doi.org/10.1007/s00158-012-0845-x.
Smith, M., W. J. Cantwell, Z. Guan, S. Tsopanos, M. D. Theobald, G. N. Nurick, and G. S. Langdon. 2010. “The quasi-static and blast response of steel lattice structures.” Int. J. Sandwich Struct. Mater. 13 (4): 479–501. https://doi.org/10.1177/1099636210388983.
Theobald, M., G. Langdon, G. Nurick, S. Pillay, A. Heyns, and R. Merrett. 2010. “Large inelastic response of unbonded metallic foam and honeycomb core sandwich panels to blast loading.” Compos. Struct. 92 (10): 2465–2475. https://doi.org/10.1016/j.compstruct.2010.03.002.
Wadley, H., K. Dharmasena, Y. Chen, P. Dudt, D. Knight, R. Charette, and K. Kiddy. 2008. “Compressive response of multilayered pyramidal lattices during underwater shock loading.” Int. J. Impact Eng. 35 (9): 1102–1114. https://doi.org/10.1016/j.ijimpeng.2007.06.009.
Wadley, H. N. 2006. “Multifunctional periodic cellular metals.” Philos. Trans. R. Soc. London A: Math. Phys. Eng. Sci. 364 (1838): 31–68. https://doi.org/10.1098/rsta.2005.1697.
Wei, Z., et al. 2008. “The resistance of metallic plates to localized impulse.” J. Mech. Phys. Solids 56 (5): 2074–2091. https://doi.org/10.1016/j.jmps.2007.10.010.
Wiernicki, C. J., F. Liem, G. D. Woods, and A. J. Furio. 1991. “Structural analysis methods for lightweight metallic corrugated core sandwich panels subjected to blast loads.” Nav. Eng. J. 103 (3): 192–202. https://doi.org/10.1111/j.1559-3584.1991.tb00949.x.
Xue, Z., and J. W. Hutchinson. 2004. “A comparative study of impulse-resistant metal sandwich plates.” Int. J. Impact Eng. 30 (10): 1283–1305. https://doi.org/10.1016/j.ijimpeng.2003.08.007.
Zhang, P., J. Liu, Y. Cheng, H. Hou, C. Wang, and Y. Li. 2015. “Dynamic response of metallic trapezoidal corrugated-core sandwich panels subjected to air blast loading—An experimental study.” Mater. Des. 65 (Jan): 221–230. https://doi.org/10.1016/j.matdes.2014.08.071.
Zhu, F., Z. Wang, G. Lu, and G. Nurick. 2010. “Some theoretical considerations on the dynamic response of sandwich structures under impulsive loading.” Int. J. Impact Eng. 37 (6): 625–637. https://doi.org/10.1016/j.ijimpeng.2009.11.003.
Zhu, F., L. Zhao, G. Lu, and Z. Wang. 2008. “Deformation and failure of blast-loaded metallic sandwich panels—Experimental investigations.” Int. J. Impact Eng. 35 (Aug): 937–951. https://doi.org/10.1016/j.ijimpeng.2007.11.003.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Mar 31, 2018
Accepted: Mar 1, 2019
Published online: Sep 18, 2019
Published in print: Dec 1, 2019
Discussion open until: Feb 18, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.