Displacements and Forces in Structures with Inerters when Subjected to Earthquakes
Publication: Journal of Structural Engineering
Volume 145, Issue 2
Abstract
This study investigates the seismic response of a two-degrees-of-freedom structure with supplemental rotational inertia at its first story. The proposed response-modification strategy uses an inerter—a mechanical device the resisting force of which is proportional to the relative acceleration between the first story and the ground. This arrangement complements the traditional supplemental damping strategies, which are also examined in this work. The paper develops a time-domain and a frequency-domain formulation for the response analysis and shows that the seismic protection of structures with supplemental rotational inertia suppresses effectively interstory drifts at the expense of transferring appreciable forces at the support of the inerter. Both a single inerter and a pair of inerters that can only resist the motion of the structure are examined. The paper examines the extent to which a compliant support of the inerter affects the dynamics of the structure and concludes that as the compliance of the support frame increases, a single inerter may lead to a more favorable response. The proposed response-modification strategy is attractive for cases with large relative displacement demands.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aghagholizadeh, M., and N. Makris. 2018. “Seismic response of a yielding structure coupled with a rocking wall.” J. Struct. Eng. 144 (2): 04017196. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001894.
Antonopoulos, A., and S. A. Anagnostopoulos. 2017. “Partial strengthening of buildings with open ground stories.” In Proc., Int. Workshop on Performance Based Seismic Design of Structure. Shanghai, China: Tongji Univ.
Arakaki, T., H. Kuroda, F. Arima, Y. Inoue, and K. Baba. 1999a. “Development of seismic devices applied to ball screw. Part 1: Basic performance test of RD-series.” [In Japanese.] AIJ J. Technol. Des. 5 (8): 239–244. https://doi.org/10.3130/aijt.5.239_1.
Arakaki, T., H. Kuroda, F. Arima, Y. Inoue, and K. Baba. 1999b. “Development of seismic devices applied to ball screw. Part 2: Performance test and evaluation of RD-series.” [In Japanese.] AIJ J. Technol. Des. 5 (9): 265–270. https://doi.org/10.3130/aijt.5.265.
Arnold, C. 1984. “Soft first stories: Truth and myths.” In Proc., 8th World Conf. on Earthquake Engineering, 943–950. San Francisco.
Bertero, V. V., J. C. Anderson, H. Krewinkler, and E. Miranda. 1991. Design guidelines for ductility and drift limits. Berkeley, CA: Univ. of California.
Bertero, V. V., S. S. Mahin, and R. A. Herrera. 1978. “Aseismic design implication of near-fault San Fernando earthquake records.” Earthquake. Eng. Struct. Dyn. 6 (1): 31–42. https://doi.org/10.1002/eqe.4290060105.
Bird, B., R. Armstrong, and O. Hassager. 1987. Dynamic of polymeric liquids. New York: Wiley.
Black, C. J., and N. Makris. 2007. “Viscous heating of fluid dampers under small and large amplitude motions: Experimental studies and parametric modeling.” J. Eng. Mech. 133 (5): 566–577. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:5(566).
Chen, M. Z. Q., Y. Hu, L. Huang, and G. Chen. 2014. “Influence of inerter on natural frequencies of vibration systems.” J. Sound Vib. 333 (7): 1874–1887. https://doi.org/10.1016/j.jsv.2013.11.025.
Chen, M. Z. Q., C. Papageorgiou, F. Scheibe, F. C. Wang, and M. C. Smith. 2009. “The missing mechanical circuit.” IEEE Circuits Syst. Mag. 9 (1): 10–26. https://doi.org/10.1109/MCAS.2008.931738.
Chopra, A. K., D. P. Clough, and R. W. Clough. 1972. “Earthquake resistance of buildings with a ‘soft’ first story.” Earthquake. Eng. Struct. Dyn. 1 (4): 347–355. https://doi.org/10.1002/eqe.4290010405.
Fintel, M., and F. R. Khan. 1969. “Shock-absorbing soft story concept for multistory earthquake structures.” ACI Struct. J. 66 (5): 381–390.
Giaralis, A., and A. A. Taflanidis. 2018. “Optimal tuned mass-damper-inerter (TMDI) design for seismically excited MDOF structures with model uncertainties based on reliability criteria.” Struct. Control Health Monit. 25 (2): e2082. https://doi.org/10.1002/stc.2082.
Green, N. B. 1934. “Flexible first story construction for earthquake resistance.” Trans. Am. Soc. Civ. Eng. 100 (1): 645–674.
Hoang, N., and P. Warnitchai. 2005. “Design of multiple tuned mass dampers by using a numerical optimizer.” Earthquake Eng. Struct. Dyn. 34 (2): 125–144. https://doi.org/10.1002/eqe.413.
Hwang, J. S., J. Kim, and Y.-M. Kim. 2007. “Rotational inertia dampers with toggle bracing for vibration control of a building structure.” Eng. Struct. 29 (6): 1201–1208. https://doi.org/10.1016/j.engstruct.2006.08.005.
Ikago, K., K. Saito, and N. Inoue. 2012. “Seismic control of single degree-of-freedom structure using tuned viscous mass damper.” Earthquake Eng. Struct. Dyn. 41 (3): 453–474. https://doi.org/10.1002/eqe.1138.
Jacobsen, L. S. 1938. “Effects of a flexible first story in a building located on vibrating ground.” In Proc., S. Timoshenko 60th Anniversary Volume, 93–103. New York: Macmilan.
Jeffreys, H. 1929. The earth. 2nd ed. Cambridge, UK: Cambridge University Press.
Kelly, J. M. 1997. Earthquake-resistant design with rubber. London: Springer.
Kelly, J. M., and D. Konstantinidis. 2011. Mechanics of rubber bearings for seismic and vibration isolation. Chichester, UK: Wiley.
Konstantinidis, D., and N. Makris. 2005. “Seismic response analysis of multidrum classical columns.” Earthquake Eng. Struct. Dyn. 34 (10): 1243–1270. https://doi.org/10.1002/eqe.478.
Kuznetsov, A., M. Mammadov, I. Sultan, and E. Hajilarov. 2011. “Optimization of improved suspension system with inerter device of the quarter-car model in vibration analysis.” Arch. Appl. Mech. 81 (10): 1427–1437. https://doi.org/10.1007/s00419-010-0492-x.
Lazar, I. F., S. A. Neild, and D. J. Wagg. 2014. “Using an inerter-based device for structural vibration suppression.” Earthquake Eng. Struct. Dyn. 43 (8): 1129–1147. https://doi.org/10.1002/eqe.2390.
Le Corbusier. 1925. “Vers une architecture.” In Collection de “L’Esprit Nouveau” Paris: Les Editions G. Cres el C.
Le Corbusier. 1986. Towards a new architecture. New York: Denver.
Makris, N. 1998. “Viscous heating of fluid dampers. I: Small-amplitude motions.” J. Eng. Mech. 124 (11): 1210–1216. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:11(1210).
Makris, N. 2017. “Basic response functions of simple inertoelastic and inertoviscous models.” J. Eng. Mech. 143 (11): 04017123. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001348.
Makris, N. 2018. “Time-response functions of mechanical networks with inerters and causality.” Meccanica 1–19. https://doi.org/10.1007/s11012-018-0822-6.
Makris, N., and G. Kampas. 2009. “Analyticity and causality of the three-parameter rheological models.” Rheol. Acta 48 (7): 815–825. https://doi.org/10.1007/s00397-009-0374-8.
Makris, N., and G. Kampas. 2016. “Seismic protection of structures with supplemental rotational inertia.” J. Eng. Mech. 142 (11): 04016089. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001152.
Makris, N., Y. Roussos, A. S. Whittaker, and J. M. Kelly. 1998. “Viscous heating of fluid dampers. Part II: Large-amplitude motions.” J. Eng. Mech. 124 (11): 1210–1216.
Marian, L., and A. Giaralis. 2014. “Optimal design of a novel tuned mass damper-inerter (TMDI) passive vibration control configuration for stochastically support-excited structural systems.” Prob. Eng. Mech. 38 (1): 156–164. https://doi.org/10.1016/j.probengmech.2014.03.007.
Martel, R. R. 1929. “The effects of earthquakes on buildings with a flexible first story.” Bull. Seis. Soc. Am. 19 (3): 167–178.
Miranda, J. C. 2005. “On tuned mass dampers for reducing the seismic response of structures.” Earthquake Eng. Struct. Dyn. 34 (7): 847–865. https://doi.org/10.1002/eqe.461.
Papageorgiou, C., N. E. Houghton, and M. C. Smith. 2009. “Experimental testing and analysis of inerter devices.” J. Dyn. Syst. Meas. Contr. 131 (1): 011001. https://doi.org/10.1115/1.3023120.
Papageorgiou, C., and M. C. Smith. 2005. “Laboratory experimental testing of inverters.” In Proc., 44th IEEE Conf. on Decision and Control and the European Control Conf., 3351–3356. Seville, Spain.
Pitilakis, D., and N. Makris. 2010. “Dimensional analysis of inelastic systems with soil-structures interaction.” Bull. Earthquake Eng. 8 (6): 1497–1514. https://doi.org/10.1007/s10518-010-9196-4.
Repapis, C., C. Zeris, and E. Vintzileou. 2006. “Evaluation of the seismic performance of existing RC buildings. II: A case study for regular and irregular buildings.” J. Earthquake Eng. 10 (3): 425–429. https://doi.org/10.1142/S1363246906002657.
Saitoh, M. 2007. “Simple model of frequency-dependent impedance functions in soil-structure interaction using frequency-independent elements.” J. Eng. Mech. 133 (1): 1111–1114. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:10(1101).
Smith, M. C. 2002. “Synthesis of mechanical networks: The inerter.” IEEE Trans. Autom. Control 47 (10): 1648–1662. https://doi.org/10.1109/TAC.2002.803532.
Swift, S. J., M. C. Smith, A. R. Glover, C. Papageorgiou, B. Gartner, and N. E. Houghton. 2013. “Design and modelling of a fluid inerter.” Int. J. Control 86 (11): 2035–2051. https://doi.org/10.1080/00207179.2013.842263.
Takewaki, I., S. Murakami, S. Yoshitomi, and M. Tsuji. 2012. “Fundamental mechanism of earthquake response reduction in building structures with inertial dampers.” Struct. Control Health Monit. 19 (6): 590–608. https://doi.org/10.1002/stc.457.
Vassiliou, M. F., and N. Makris. 2012. “Analysis of the rocking response of rigid blocks standing free on a seismically isolated base.” Earthquake Eng. Struct. Dyn. 41 (2): 177–196. https://doi.org/10.1002/eqe.1124.
Wang, F. C., M. F. Hong, and C. W. Chen. 2010. “Building suspensions with inerters.” Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. 224 (8): 1605–1616. https://doi.org/10.1243/09544062JMES1909.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Mar 2, 2018
Accepted: Aug 17, 2018
Published online: Dec 14, 2018
Published in print: Feb 1, 2019
Discussion open until: May 14, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.