Fire-Resistance Behavior of Completely Overlapped Tubular Joints under Lap Brace Axial Loading
Publication: Journal of Structural Engineering
Volume 144, Issue 9
Abstract
The fire resistance behavior of completely overlapped tubular joints was experimentally and numerically investigated. Three completely overlapped tubular joint specimens with different geometric properties were tested to failure under constant lap brace axial loads at elevated temperatures. The failure modes of the three specimens were identified as the local indentation with plastification at the through brace face joining the lap brace. No sign of local deformation on the chord was observed. The finite-element (FE) models of completely overlapped tubular joints were developed based on the sequentially coupled thermal-stress analysis using ABAQUS (version 6.10). The comparison of the critical temperature, fire endurance time, and failure mode showed that the FE analysis was in good agreement with the experimental results. A parametric study was subsequently carried out to quantify the effects of various geometric parameters of the joints under fire conditions. An existing equation was adapted from the Comité International pour le Dévelopment et 1’Etude de la Construction Tubulaire (CIDECT) to predict the critical temperature of the joints. Based on the data obtained from the experiment and the FE analysis, the adapted equation predicted reasonably well the critical temperature of the completely overlapped tubular joints under lap brace axial loading.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work is supported by the National Key Research & Development Plan of China (Grant No. 2016YFC0802002) and Fundamental Research Funds for the Central Universities (Grant No. HUST: 2016JCTD113).
References
BSI (British Standards Institutation). 2009. Metallic material tensile testing: Part 1 method of test at ambient temperature. Brussels, Belgium: BSI.
CEN (European Committee for Standardization). 2005. Design of steel structure-part 1.2: general rules-structural fire design. Eurocode 3. Brussels, Belgium: CEN.
Chen, C., Y. B. Shao, and J. Yang. 2013. “Experimental and numerical study on fire resistance of circular tubular T-joints.” J. Constr. Steel Res. 85: 24–39. https://doi.org/10.1016/j.jcsr.2013.02.013.
Chen, C., Y. B. Shao, and J. Yang. 2015. “Study on fire resistance of circular hollow section (CHS) T-joint stiffened with internal rings.” Thin Walled Struct. 92: 104–114. https://doi.org/10.1016/j.tws.2015.02.005.
Fung, T. C., C. K. Soh, W. M. Gho, and F. Qin. 2001. “Ultimate capacity of completely overlapped tubular joints. I: An experimental investigation.” J. Constr. Steel Res. 57 (8): 855–880. https://doi.org/10.1016/S0143-974X(01)00013-X.
Gao, F., X. Q. Guan, H. P. Zhu, and X. N. Liu. 2015a. “Fire resistance behavior of tubular T-joints reinforced with collar plates.” J. Constr. Steel Res. 115: 106–120. https://doi.org/10.1016/j.jcsr.2015.07.021.
Gao, F., X. Q. Guan, H. P. Zhu, and Y. Xia. 2015b. “Hysteretic behavior of tubular T-joints reinforced with doubler plates after fire exposure.” Thin Walled Struct. 92: 10–20. https://doi.org/10.1016/j.tws.2015.02.010.
Gao, F., and B. Hu. 2015. “Local joint flexibility of completely overlapped tubular joints under out-of-plane bending.” J. Constr. Steel Res. 115: 121–130. https://doi.org/10.1016/j.jcsr.2015.08.016.
Gao, F., B. Hu, and H. P. Zhu. 2013a. “Parametric equations to predict LJF of completely overlapped tubular joints under lap brace axial loading.” J. Constr. Steel Res. 89: 284–292. https://doi.org/10.1016/j.jcsr.2013.07.010.
Gao, F., B. Hu, and H. P. Zhu. 2014. “Local joint flexibility of completely overlapped tubular joints under in-plane bending.” J. Constr. Steel Res. 99: 1–9. https://doi.org/10.1016/j.jcsr.2014.03.004.
Gao, F., H. P. Zhu, and X. N. Liu. 2013b. “Failure behavior of axial loaded tubular Y-joints under fire.” Adv. Struct. Eng. 16 (9): 1523–1533. https://doi.org/10.1260/1369-4332.16.9.1523.
Gho, W. M., Y. Yang, and F. Gao. 2006. “Failure mechanisms of tubular CHS joints with complete overlap of braces.” Thin Walled Struct. 44 (6): 655–666. https://doi.org/10.1016/j.tws.2006.05.007.
He, S. B., Y. B. Shao, H. Y. Zhang, and Q. L. Wang. 2015. “Parametric study on performance of circular tubular K-joints at elevated temperature.” Fire Saf. J. 71: 174–186. https://doi.org/10.1016/j.firesaf.2014.11.001.
He, S. B., Y. B. Shao, H. Y. Zhang, D. P. Yang, and F. L. Long. 2013. “Experimental study on circular hollow section (CHS) tubular K-joints at elevated temperature.” Eng. Failure Anal. 34: 204–216. https://doi.org/10.1016/j.engfailanal.2013.07.035.
ISO. 1999. ISO 834 Fire resistance tests elements-elements of building construction. Geneva: ISO.
Jin, M., J. Zhao, M. Liu, and J. Chang. 2011. “Parametric analysis of mechanical behavior of steel planar tubular truss under fire.” J. Constr. Steel Res. 67 (1): 75–83. https://doi.org/10.1016/j.jcsr.2010.07.012.
Liu, M. L., J. C. Zhao, and M. Jin. 2010. “An experimental study of the mechanical behavior of steel planar tubular trusses in a fire.” J. Constr. Steel Res. 66 (4): 504–511. https://doi.org/10.1016/j.jcsr.2009.11.005.
Lu, L., G. De Winkel, Y. Yu, and J. Wardenier. 1994. “Deformation limit for the ultimate strength of hollow section joints.” In Proc., 6th Int. Symp. on Tubular Structures, 341–347. Rotterdam: A.A. Balkema.
Ozyurt, E., Y. C. Wang, and K. H. Tan. 2014. “Elevated temperature resistance of welded tubular joints under axial load in the brace member.” Eng. Struct. 59: 574–586. https://doi.org/10.1016/j.engstruct.2013.11.014.
Soh, C. K., T. C. Fung, F. Qin, and W. M. Gho. 2001. “Behavior of completely overlapped tubular joints under cyclic loading.” J. Struct. Eng. 127 (2): 122–128. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:2(122).
Tan, K. H., T. C. Fung, and M. P. Nguyen. 2013. “Structural behavior of CHS T-Joints subjected to brace axial compression in fire conditions.” J. Struct. Eng. 139 (1): 73–84. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000604.
Wardenier, J., J. A. Packer, X. L. Zhao, and G. J. van der Vegte. 2010. Design guide for circular hollow section (CHS) joints under predominantly static loading. Zoetermeer, Netherlands: Comité International pour le Dévelopment et 1’Etude de la Construction Tubulaire.
Yang, J., Y. B. Shao, and C. Chen. 2014. “Experimental study on fire resistance of square hollow section (SHS) tubular T-joint under axial compression.” Adv. Steel Constr. 10 (1): 72–84.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Sep 18, 2016
Accepted: Mar 4, 2018
Published online: Jun 20, 2018
Published in print: Sep 1, 2018
Discussion open until: Nov 20, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.