Performance of Elliptical Hollow Sections under Combined Compression and Cyclic Bending
Publication: Journal of Structural Engineering
Volume 144, Issue 8
Abstract
This paper comprehensively discusses the potential of applying elliptical hollow sections (EHSs) for seismic regions. The study commenced with an experimental investigation of 12 EHS beam-column specimens under combined compression and uniaxial cyclic bending, where the main test parameters were section slenderness, axial load ratio, and loading direction. Local buckling was found to be the main failure mode for all specimens, and strength, ductility, and energy dissipation greatly depended on the varying test parameters. The manufacturing of the specimens was also looked into, and the resulting material properties and residual stresses were examined. Following the experimental study, a numerical investigation was carried out. The numerical models were validated against the experimental data with good agreement observed, enabling a further parametric study to be conducted taking account of a wider range of parameter matrices. The influences of a spectrum of geometric and material properties on section behavior were evaluated, and, based on the available data, a ductility-oriented design approach for EHSs was proposed. The imperfection amplitude and imperfection shape were found to moderately affect the behavior of EHSs.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Financial support from the Program for Young Excellent Talents in Tongji University is gratefully acknowledged. Additional support was provided by a research grant from the State Key Laboratory for Disaster Prevention in Civil Engineering (Grant No. SLDRCE14-B-07).
References
Abaqus. 2012. Analysis user’s manual. Abaqus, version 6.12. Waltham, MA: Dassault Systèmes.
AISC. 2010. Seismic provisions for structural steel buildings. Chicago, IL: AISC.
Almkvist, G., and B. Berndt. 1988. “Gauss, Landen, Ramanujan, the arithmetic-geometric mean, ellipses, π, and the ladies diary.” Am. Math. Monthly 95 (7): 585–608. https://doi.org/10.1080/00029890.1988.11972055.
CEN (European Committee for Standardization). 2004a. Eurocode 4: Design of composite steel and concrete structures. Part 1-1: General rules and rules for buildings. EN 1994-1-1. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2004b. Eurocode 8: Design of structures for earthquake resistance. Part 1: General rules, seismic actions and rules for buildings. EN 1998-1. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2005. Eurocode 3: Design of steel structures. Part 1-1: General rules and rules for buildings. EN 1993-1-1. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2006. Hot finished structural hollow sections of non-alloy and fine grain steels. Part 2: Tolerances, dimensions and sectional properties. EN 10210-2. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2007a. Eurocode 3: Design of steel structures. Part 1-6: General rules—Strength and stability of shell structures. EN 1993-1-6. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2007b. Eurocode 3: Design of steel structures. Part 1:12: Additional rules for the extension of EN1993 up to steel grades S700. EN 1993-1-12. Brussels, Belgium: CEN.
Chan, T. M., and L. Gardner. 2008. “Compressive resistance of hot-rolled elliptical hollow sections.” Eng. Struct. 30 (2): 522–532. https://doi.org/10.1016/j.engstruct.2007.04.019.
Chan, T. M., and L. Gardner. 2009. “Flexural buckling of elliptical hollow section columns.” J. Struct. Eng. 135 (5): 546–557. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000005.
Chan, T. M., Y. M. Huai, and W. Wang. 2015. “Experimental investigation on lightweight concrete-filled cold-formed elliptical hollow section stub columns.” J. Constr. Steel Res. 115: 434–444. https://doi.org/10.1016/j.jcsr.2015.08.029.
Dai, X., and D. Lam. 2010. “Numerical modelling of the axial compressive behavior of short concrete-filled elliptical steel columns.” J. Constr. Steel Res. 66 (7): 931–942. https://doi.org/10.1016/j.jcsr.2010.02.003.
Dai, X., D. Lam, N. Jamaluddin, and J. Ye. 2014. “Numerical analysis of slender elliptical concrete filled columns under axial compression.” Thin Wall. Struct. 77 (4): 26–35. https://doi.org/10.1016/j.tws.2013.11.015.
Espinos, A., M. L. Romero, E. Serra, and A. Hospitaler. 2015. “Experimental investigation on the fire behavior of rectangular and elliptical slender concrete-filled tubular columns.” Thin Wall. Struct. 93: 137–148. https://doi.org/10.1016/j.tws.2015.03.018.
Fang, C., W. Wang, C. He, and Y. Y. Chen. 2017. “Self-centring behaviour of steel and steel-concrete composite connections equipped with NiTi SMA bolts.” Eng. Struct. 150: 390–408. https://doi.org/10.1016/j.engstruct.2017.07.067.
Fang, C., M. C. H. Yam, A. C. C. Lam, and L. K. Xie. 2014. “Cyclic performance of extended end-plate connections equipped with shape memory alloy bolts.” J. Constr. Steel Res. 94: 122–136. https://doi.org/10.1016/j.jcsr.2013.11.008.
Fang, C., M. C. H. Yam, X. Y. Zhou, and Y. Y. Zhang. 2015. “Post-buckling resistance of gusset plate connections: Behavior, strength, and design considerations.” Eng. Struct. 99: 9–27. https://doi.org/10.1016/j.engstruct.2015.04.043.
Feinstein, G., B. Erickson, and J. Kempner. 1971. “Stability of oval cylindrical shells.” Exp. Mech. 11 (11): 514–520. https://doi.org/10.1007/BF02327691.
FEMA. 2000a. Recommended seismic design criteria for new moment-resisting steel frame structures. FEMA 350. Washington, DC: FEMA.
FEMA. 2000b. State of the art report on connection performance. FEMA 355D. Washington, DC: FEMA.
Galambos, T. V. 1998. Guide to stability design criteria for metal structures. 5th ed. New York: Wiley.
Gardner, L., T. M. Chan, and K. H. Law. 2010. “Structural design of elliptical hollow sections: A review.” Structures Buildings 163 (6): 391–402. https://doi.org/10.1680/stbu.2010.163.6.391.
ISO. 2009. Metallic materials: Tensile testing. Part 1: Method of test at room temperature. ISO 6892-1. London, UK: ISO.
Jamaluddin, N., D. Lam, X. Dai, and J. Ye. 2013. “An experimental study on elliptical concrete filled columns under axial compression.” J. Constr. Steel Res. 87 (6): 6–16. https://doi.org/10.1016/j.jcsr.2013.04.002.
Jiao, H., and X. L. Zhao. 2003. “Imperfection, residual stress and yield slenderness limit of very high strength (VHS) circular steel tubes.” J. Constr. Steel Res. 59 (2): 233–249. https://doi.org/10.1016/S0143-974X(02)00025-1.
Law, K. H., and L. Gardner. 2012. “Lateral instability of elliptical hollow section beams.” Eng. Struct. 37 (4): 152–166. https://doi.org/10.1016/j.engstruct.2011.12.008.
Law, K. H., and L. Gardner. 2013. “Buckling of elliptical hollow section members under combined compression and uniaxial bending.” J. Constr. Steel Res. 86 (7): 1–16. https://doi.org/10.1016/j.jcsr.2013.03.008.
McCann, F., C. Fang, L. Gardner, and N. Silvestre. 2016. “Local buckling and ultimate strength of slender elliptical hollow sections in compression.” Eng. Struct. 111: 104–118. https://doi.org/10.1016/j.engstruct.2015.12.020.
McCann, F., L. Gardner, and W. Qiu. 2015. “Experimental study of slender concrete-filled elliptical hollow section beam-columns.” J. Constr. Steel Res. 113: 185–194. https://doi.org/10.1016/j.jcsr.2015.06.013.
Quach, W. M., and B. Young. 2015. “Material properties of cold-formed and hot-finished elliptical hollow sections.” Adv. Struct. Eng. 18 (7): 1101–1114. https://doi.org/10.1260/1369-4332.18.7.1101.
Ruiz-Teran, A. M., and L. Gardner. 2008. “Elastic buckling of elliptical tubes.” Thin Wall. Struct. 46 (11): 1304–1318. https://doi.org/10.1016/j.tws.2008.01.036.
SCI/BSCA (Steel Construction Institute and British Constructional Steelwork Association). 2009. Steel building design: Design data in accordance with Eurocodes and the UK National Annexes. SCI P363. Ascot/London, UK: SCI/BSCA.
Sheehan, T., X. Dai, T. M. Chan, and D. Lam. 2012. “Structural response of concrete-filled elliptical steel hollow sections under eccentric compression.” Eng. Struct. 45: 314–323. https://doi.org/10.1016/j.engstruct.2012.06.040.
Silvestre, N., and L. Gardner. 2011. “Elastic local post-buckling of elliptical tubes.” J. Constr. Steel Res. 67 (3): 281–292. https://doi.org/10.1016/j.jcsr.2010.11.004.
Wang, W., C. Fang, Y. Y. Chen, and M. X. Wang. 2016. “Seismic performance of steel H-beam to SHS-column cast modular panel zone joints.” Eng. Struct. 117: 145–160. https://doi.org/10.1016/j.engstruct.2016.03.006.
Yam, M. C. H., C. Fang, and A. C. C. Lam. 2016. “Local web buckling mechanism and practical design of double-coped beam connections.” Eng. Struct. 125: 54–69. https://doi.org/10.1016/j.engstruct.2016.06.049.
Yam, M. C. H., C. Fang, A. C. C. Lam, and Y. Y. Zhang. 2015. “Numerical study and practical design of beam-to-column connections with shape memory alloys.” J. Constr. Steel Res. 104: 177–192. https://doi.org/10.1016/j.jcsr.2014.10.017.
Yang, H., D. Lam, and L. Gardner. 2008. “Testing and analysis of concrete-filled elliptical hollow sections.” Eng. Struct. 30 (12): 3771–3781. https://doi.org/10.1016/j.engstruct.2008.07.004.
Zhao, X. L., and J. A. Packer. 2009. “Tests and design of concrete-filled elliptical hollow section stub columns.” Thin Wall. Struct. 47 (6–7): 617–628. https://doi.org/10.1016/j.tws.2008.11.004.
Zhu, J. H., and B. Young. 2011. “Cold-formed-steel oval hollow sections under axial compression.” J. Struct. Eng. 137 (7): 719–727. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000337.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Mar 26, 2017
Accepted: Feb 5, 2018
Published online: May 25, 2018
Published in print: Aug 1, 2018
Discussion open until: Oct 25, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.