Assessing Immediate and Time-Dependent Instantaneous Stiffness of Cracked Reinforced Concrete Beams Using Residual Cracks
Publication: Journal of Structural Engineering
Volume 144, Issue 4
Abstract
Under normal in-service conditions, beams and slabs in reinforced concrete structures are usually cracked. Concrete cracking and steel-concrete bond damage lead to an irreversible reduction in the overall stiffness, thereby affecting the serviceability of reinforced concrete structures. The method proposed in this paper aims to assess both the steel-concrete bond damage and the bending stiffness of existing structures based on the cracking pattern observed in situ including the location of bending cracks, their spacing, and their width. The time-dependent effects of creep and shrinkage are also considered. Short-term and long-term experimental results obtained from tests on five reinforced concrete beams are used to evaluate the effectiveness of the method. For each beam, the cracking pattern and the width of cracks measured immediately after first loading and after a 6-month period of sustained loading are used to assess the immediate and time-dependent instantaneous stiffness of the beams. The stiffness and the load-deflection response determined using the proposed method are shown to agree well with experimental observations.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are very grateful for the funding from National Key Research and Development Program of China with Grant Nos. 2016YFC0802205 and 2016YFB1200401, Projects 51778535 and 51778537 supported by National Natural Science Foundation of China, Projects DP110103028 and DP140100529 supported by the Australian Research Council, and Research and Development Project 2014-02-015 supported by Department of Communications of Guangdong Province. The first author wishes to thank the Key Laboratory of High-speed Railway Engineering, Ministry of Education, Southwest Jiaotong University, People’s Republic of China, for its support.
References
ACI (American Concrete Institute). (1992). “Prediction of creep, shrinkage, and temperature effects in concrete structures (Reapproved 2008).”, Farmington Hills, MI.
ACI (American Concrete Institute). (2008). “Building code requirements for structural concrete (ACI 318-08) and commentary.”, Farmington Hills, MI.
Bischoff, P. H. (2005). “Reevaluation of deflection prediction for concrete beams reinforced with steel and fiber reinforced polymer bars.” J. Struct. Eng., 752–767.
Bischoff, P. H. (2007). “Rational model for calculating deflection of reinforced concrete beams and slabs.” Can. J. Civ. Eng., 34(8), 992–1002.
Branson, D. E. (1963). “Instantaneous and time-dependent deflections of simple and continuous reinforced concrete beams.”, Alabama Highway Dept., Montgomery, AL.
Castel, A., and François, R. (2011). “Modeling of steel and concrete strains between primary cracks for the prediction of cover-controlled cracking in RC-beams.” Eng. Struct., 33(12), 3668–3675.
Castel, A., and François, R. (2013). “Calculation of the overall stiffness and irreversible deflection of cracked reinforced concrete beams.” Adv. Struct. Eng., 16(12), 2035–2042.
Castel, A., Gilbert, R. I., and Ranzi, G. (2014). “Instantaneous stiffness of cracked reinforced concrete including steel-concrete interface damage and long-term effects.” J. Struct. Eng., 04014021.
Castel, A., Vidal, T., and François, R. (2006). “Effective tension active cross-section of reinforced concrete beams after cracking.” Mater. Struct., 39(1), 115–126.
Castel, A., Vidal, T., and François, R. (2012). “Finite-element modeling to calculate the overall stiffness of cracked reinforced concrete beams.” J. Struct. Eng., 889–898.
CEB-FIP (Comité Euro-International du Béton–Fédération International de la Précontrainte). (2010). fib model code for concrete structures 2010, Thomas Telford, Lausanne, Switzerland.
Gilbert, R. I. (2007). “Tension stiffening in lightly reinforced concrete slabs.” J. Struct. Eng., 899–903.
Gilbert, R. I. (2008). “Control of flexural cracking in reinforced concrete.” ACI Struct. J., 105(3), 301–307.
Gilbert, R. I., and Ranzi, G. (2010). Time-dependent behaviour of concrete structures, Spon Press, London.
Gribniak, V., Caldentey, A. P., Kaklauskas, G., Rimkus, A., and Sokolov, A. (2016). “Effect of arrangement of tensile reinforcement on flexural stiffness and cracking.” Eng. Struct., 124, 418–428.
Gribniak, V., Cervenka, V., and Kaklauskas, G. (2013). “Deflection prediction of reinforced concrete beams by design codes and computer simulation.” Eng. Struct., 56(6), 2175–2186.
Jakubovskis, R., Kaklauskas, G., Gribniak, V., Weber, A., and Juknys, M. (2014). “Serviceability analysis of concrete beams with different arrangements of GFRP bars in the tensile zone.” J. Compos. Constr., 04014005.
Kaklauskas, G., Gribniak, V., Bacinskas, D., and Vainiunas, P. (2009). “Shrinkage influence on tension stiffening in concrete members.” Eng. Struct., 31(6), 1305–1312.
Murray, A., Castel, A., Gilbert, R. I., and Zhen-Tian, C. (2016). “Time-dependent changes in the instantaneous stiffness of reinforced concrete beams.” Eng. Struct., 126, 641–651.
Standards Australia. (2009). “Concrete structures.” AS 3600-2009, Sydney, Australia.
Xu, T., and Castel, A. (2016). “Modeling the dynamic stiffness of cracked reinforced concrete beams under low-amplitude vibration loads.” J. Sound Vibr., 368, 135–147.
Xu, T., Castel, A., Gilbert, R. I., and Murray, A. (2016). “Modeling the tensile steel reinforcement strain in RC-beams subjected to cycles of loading and unloading.” Eng. Struct., 126, 92–105.
Yankelevsky, D. Z., Jabareen, M., and Abutbul, A. D. (2008). “One-dimensional analysis of tension stiffening in reinforced concrete with discrete cracks.” Eng. Struct., 30(1), 206–217.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Nov 25, 2016
Accepted: Oct 18, 2017
Published online: Feb 10, 2018
Published in print: Apr 1, 2018
Discussion open until: Jul 10, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.