A Prediction Model for Bond Deterioration in RC Members. II: Bond Failure after Flexural Yielding
Publication: Journal of Structural Engineering
Volume 144, Issue 3
Abstract
Reinforced concrete (RC) structures are designed in such a way that flexural yielding precedes bond failure, in order to ensure the ductile behavior of members. When subject to cyclic loading including seismic loads, brittle bond failure may occur due to bond deterioration at the interface between concrete and longitudinal reinforcement. To prevent the brittle failure of RC members in which flexural yielding occurs first, this study proposes a model to predict the bond stress-slip relationship and evaluate the ductility of members based on the test results of RC members that experience bond failure after flexural yielding. The variables of the proposed model are lateral loading patterns, confinement conditions of longitudinal reinforcement, and yield strength of lateral confining reinforcement. The reliability of the proposed model was verified by comparing the test results for RC members to the analytical results. The proposed model provided outstanding predictions for the bond stress-slip relationship and ductility of RC members.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported by the Functional Districts of the Science Belt support program, Ministry of Science and ICT (2017K000488). This work was also supported by the National Research Foundation of Korea (NRF) grant funded by the Korean government (MSIP) (No. NRF-2015R1A2A2A01003397).
References
Araki, H., and Hong, C. (2016). “Distributions of bond stress between plain round bars and low strength concrete under cyclic loadings.” Proc., 4th Int. Conf. on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR), CRC Press, Leiden, Netherlands, 975–982.
Bamonte, P. F., and Gambarova, P. G. (2007). “High-bond bars in NSC and HPC: Study on size effect and on the local bond stress-slip law.” J. Struct. Eng., 225–234.
Eligehausen, R., Popov, E. P., and Bertero, V. V. (1983). “Local bond stress–slip relationships of deformed bars under generalized excitations.”, Earthquake Engineering Research Center, Univ., of California, Berkeley, CA.
Fujii, S. (1998). “Splitting bond failure in reinforced concrete members.” Concr. J. Jpn., 36(2), 10–16.
Goto, Y. (1971). “Cracks formed in concrete around deformed tension bars.” ACI J. Proc., 68(4), 244–251.
Harajli, M. H. (2009). “Bond stress-slip model for steel bars in unconfined or steel, FRC, or FRP confined concrete under cyclic loading.” J. Struct. Eng., 509–518.
Hsu, T. T. C., and Mo, Y. L. (2010). Unified theory of concrete structures, Wiley, West Sussex, U.K.
Kaku, T. (1979). “A study on the effects of bond properties of deformed bars and the deformation properties of the reinforced concrete member.” Ph.D. thesis, Univ. of Kyoto, Kyoto, Japan.
Kim, H. B. (2013). “(An) evaluation on structural response of RC elements in bond failure after flexural yielding.” Master’s thesis, Sungkyunkwan Univ., Suwon, South Korea.
Kim, M. J. (2015). “Prediction of bond stress-slip behavior for reinforced concrete members.” Ph.D. thesis, Kongju National Univ., Cheonan, South Korea.
Kim, M.-J., Kim, H.-G., Lee, J.-M., Lee, Y.-J., and Kim, K.-H. (2018). “A prediction model for bond deterioration in RC members. I: Bond stress-slip behavior for splitting failure.” J. Struct. Eng., 04018002.
Lutz, L. A., and Gergely, P. (1967). “Mechanics of bond and slip of deformed bars in concrete.” ACI J. Proc., 64(11), 711–721.
Morita, S., and Kaku, T. (1973). “Local bond stress–slip under repeated loading.” Proc., IABSE Symp.: Resistance and Ultimate Deformability of Structures Acted on by Well-Defined Repeated Loads, IABSE, Lisboa, Portugal, 221–227.
Orangun, C. O., Jirsa, J. O., and Breen, J. E. (1977). “A reevaluation of test data on development length and splices.” ACI J. Proc., 74(3), 114–122.
Paulay, T., and Priestley, M. J. N. (1992). Seismic design of reinforced concrete and masonry buildings, Wiley, New York.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 144 • Issue 3 • March 2018
Copyright
©2018 American Society of Civil Engineers.
History
Received: Dec 30, 2016
Accepted: Aug 22, 2017
Published online: Jan 3, 2018
Published in print: Mar 1, 2018
Discussion open until: Jun 3, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.