Behavior of Steel Rectangular Hollow Sections Subject to Blast Loading
Publication: Journal of Structural Engineering
Volume 143, Issue 12
Abstract
Large-scale far-field air-blast testing of cold-formed steel rectangular hollow sections (RHS) in flexure has been performed for the first time. These arena trials illustrated the excellent performance and ductility of cold-formed tubular steel members under extreme blast loads, without any fractures experienced in the cross section. These instrumented tests provided much performance data that enabled the validation of subsequent models, using both single-degree-of-freedom and explicit finite-element analysis. By means of a parametric numerical study, the behavioral models were used to illustrate the influence of key variables affecting the response. Guidance is then given for the preliminary selection of RHS flexural members for blast design applications to achieve various ductility ratios.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are appreciative of the financial aid and in-kind support of the Explora Foundation to the University of Toronto “Centre for Resilience of Critical Infrastructure.” Financial support has also been received from the Natural Sciences and Engineering Research Council of Canada (NSERC), the Steel Structures Education Foundation (SSEF), the Thornton Tomasetti Foundation, the Lyon Sachs Graduate Research Fund, the Australian Research Council (ARC) Discovery Grant (Project ID: DP130100181), and the Tsinghua Initiative Scientific Research Program (No. 20131089347). Technical advice and assistance from Prof. D. Z. Yankelevsky and Mr. M. Gow are also highly appreciated.
References
ABAQUS [Computer software]. Dassault Systèmes, Waltham, MA.
Abramowicz, W., and Jones, N. (1986). “Dynamic progressive buckling of circular and square tubes.” Int. J. Impact Eng., 4(4), 243–270.
ANSYS [Computer software]. ANSYS, Canonsburg, PA.
ASCE. (2011). “Blast protection of buildings.” ASCE/SEI 59-11, Reston, VA.
Astaneh-Asl, A. (2010). “Notes on blast resistance of steel and composite building structures.”, Structural Steel Educational Council, Moraga, CA.
ASTM. (2015). “Standard test methods and definitions for mechanical testing of steel products.” ASTM A370-15, West Conshohocken, PA.
Bambach, M. R. (2011). “Design of hollow and concrete filled steel and stainless steel tubular columns for transverse impact loads.” Thin Walled Struct., 49(10), 1251–1260.
Bambach, M. R., Jama, H. H., Zhao, X. L., and Grzebieta, R. H. (2008). “Hollow and concrete filled steel hollow sections under transverse impact loads.” Eng. Struct., 30(10), 2859–2870.
Cadoni, E., and Forni, D. (2015). “Strain rate effects on reinforcing steels in tension.” EPJ Web of Conf., EDP Sciences, Les Ulis, France, 94.
CEN (European Committee for Standardization). (2006). “Cold formed welded structural hollow sections of non-alloy and fine grain steels. I: Technical delivery conditions.” EN 10219-1:2006, Brussels, Belgium.
Cowper, G. R., and Symonds, P. S. (1957). “Strain-hardening and strain-rate effects in the impact loading of cantilever beams.”, Brown Univ., Providence, RI.
CSA (Canadian Standards Association). (2012). “Design and assessment of buildings subjected to blast loads.” S850-12, Toronto.
DOD (Department of Defense). (2008). “Structures to resist the effects of accidental explosions.” UFC 3-340-02, Washington, DC.
Forni, D., Chiaia, B., and Cadoni, E. (2016). “Strain rate behaviour in tension of S355 steel: Base for progressive collapse analysis.” Eng. Struct., 119, 164–173.
Gilsanz, R., Hamburger, R., Barker, D., and Rahimian, A. (2013). Design of blast resistant structures, AISC, Chicago.
Hyde, D. (1988). “Microcomputer programs CONWEP and FUNPRO, applications of TM 5-855-1, ‘fundamentals of protective design for conventional weapons’ (user’s guide).”, U.S. Army Engineer Waterways Experiment Station, Vicksburg, MS.
Jama, H. H., Bambach, M. R., Grzebieta, R. H., and Zhao, X. L. (2006). “Flexural response of fixed-ended tubular steel beams strengthened with CFRP subjected to impact loads.” Proc., 8th Int. Conf. on Steel, Space and Composite Structures, Ci-Premier, Signapore, 229–235.
Jama, H. H., Bambach, M. R., Nurick, G. N., Grzebieta, R. H., and Zhao, X.-L. (2009). “Numerical modelling of square tubular steel beams subjected to transverse blast loads.” Thin Walled Struct., 47(12), 1523–1534.
Jama, H. H., Nurick, G. N., Bambach, M. R., Grzebieta, R. H., and Zhao, X. L. (2012). “Steel square hollow sections subjected to transverse blast loads.” Thin Walled Structures, 53, 109–122.
Johnson, G. R., and Cook, W. H. (1983). “A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures.” Proc., 7th Int. Symp. on Ballistics, Hague, Netherlands, 541–547.
LS-DYNA [Computer software]. Livermore Software Technology Corporation, Livermore, CA.
Marais, S. T., Tait, R. B., Cloete, T. J., and Nurick, G. N. (2004). “Material testing at high strain rate using the split Hopkinson pressure bar.” Lat. Am. J. Solids Struct., 1(1), 319–339.
Ngo, T., Mendis, P., Gupta, A., and Ramsay, J. (2007). “Blast loading and blast effects on structures: An overview.” Electron. J. Struct. Eng., 7(S1), 76–91.
Ngo, T., Mohotti, D., Remennikov, A., and Uy, B. (2015). “Numerical simulations of response of tubular steel beams to close-range explosions.” J. Constr. Steel Res., 105, 151–163.
Remennikov, A., Kong, S. Y., and Uy, B. (2011). “Response of foam- and concrete-filled square steel tubes under low-velocity impact loading.” J. Perform. Constr. Facil., 373–381.
Remennikov, A., and Uy, B. (2013). “Simplified modeling of hollow and concrete-filled tubular steel columns for near-field detonations.” Proc., 15th Int. Symp. on Interaction of the Effects of Munitions with Structures, Potsdam, Germany.
SBEDS (Single-Degree-of-Freedom Blast Effects Design Spreadsheet) [Computer software]. U.S. Army Corps of Engineers. Washington, DC.
Sun, M., and Packer, J. A. (2014). “High strain rate behaviour of cold-formed rectangular hollow sections.” Eng. Struct., 62–63, 181–192.
Walker, M., Seica, M., and Packer, J. (2011). “Behaviour of square hollow section steel members under transverse high-impact loading.” Proc., 14th Int. Symp. on Interaction of the Effects of Munitions with Structures, Seattle.
Wegener, R. B., and Martin, J. B. (1985). “Predictions of permanent deformation of impulsively loaded simply supported square tube steel beams.” Int. J. Mech. Sci., 27(1–2), 55–69.
Yousuf, M., Uy, B., Tao, Z., Remennikov, A., and Liew, J. Y. R. (2013). “Transverse impact resistance of hollow and concrete filled stainless steel columns.” J. Constr. Steel Res., 82, 177–189.
Yousuf, M., Uy, B., Tao, Z., Remennikov, A., and Liew, J. Y. R. (2014). “Impact behaviour of pre-compressed hollow and concrete filled mild and stainless steel columns.” J. Constr. Steel Res., 96, 54–68.
Yu, J., and Jones, N. (1991). “Further experimental investigations on the failure of clamped beams under impact loads.” Int. J. Solids Struct., 27(9), 1113–1137.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Jan 18, 2017
Accepted: Jun 27, 2017
Published online: Sep 28, 2017
Published in print: Dec 1, 2017
Discussion open until: Feb 28, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.