Model for the Plastic Region in Slender RC Columns with Nonlinear Moment and Stiffness Profiles
Publication: Journal of Structural Engineering
Volume 143, Issue 9
Abstract
This paper presents a nonlinear inelastic solution for the length of the critical plastic region in the case of nonlinear moment profiles along RC bridge columns. A new analytical expression for the length of the plastic region capturing the combined effects that column slenderness, second-order moments, and the reduced postyield flexural stiffness have on the spread of plasticity over the column length is proposed. Variable flexural stiffness along the column height was also considered. Experimental results from three slender RC bridge columns with aspect ratios (shear span to diameter) greater than 10 were used to verify the analytical solution. Moreover, the results from the proposed solution were compared against previous models and it was found that the presented nonlinear inelastic solution offers better performance over linear and nonlinear elastic solutions for predicting the length of the plastic region and how it is affected by geometric nonlinearities and moments.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research described in this paper was carried out with funding from the U.S. National Science Foundation under Grants CMMI-1000549 and CMMI-1000797.
References
AASHTO. (2011). Guide specifications for LRFD seismic bridge design, Washington, DC.
ACI (American Concrete Institute). (2014). “Building code requirements for structural concrete and commentary.” ACI 318-14, Farmington Hills, MI.
Aristizábal-Ochoa, J. (2004). “Large deflection stability of slender beam-columns with semirigid connections: Elastica approach.” J. Eng. Mech., 274–282.
Awtar, S. (2004). “Synthesis and analysis of parallel kinematic xy flexure mechanisms.” Sc.D. thesis, Massachusetts Institute of Technology, Cambridge, MA.
Awtar, S., and Sen, S. (2010). “A generalized constraint model for two-dimensional beam flexures: Nonlinear load-displacement formulation.” J. Mech. Des., 132(8), 081008.
Babazadeh, A., Burgueño, R., and Silva, P. F. (2016a). “Evaluation of the critical plastic region length in slender reinforced concrete bridge columns.” Eng. Struct., 125(8), 280–293.
Babazadeh, A., Burgueño, R., and Silva, P. F. (2016b). “ effects on the plastic region of rc bridge columns: Closed-form solution.” J. Struct. Eng., 04016116.
Bae, S., and Bayrak, O. (2008). “Plastic hinge length of reinforced concrete columns.” ACI Struct. J., 105(3), 290–300.
Bažant, Z. P., and Cedolin, L. (2010). Stability of structures: Elastic, inelastic, fracture and damage theories, World Scientific Publishing, Singapore.
Berry, M. P., Lehman, D. E., and Lowes, L. N. (2008). “Lumped-plasticity models for performance simulation of bridge columns.” ACI Struct. J., 105(3), 270–279.
Bisshop, K. E., and Drucker, D. C. (1945). “Large deflections of cantilever beams.” Q. Appl. Math., 3(3), 272–275.
Burgueño, R., Babazadeh, A., and Silva, P. F. (2016). “Second-order effects on the seismic response of slender bridge columns.” ACI Struct. J., 113(04), 735–746.
Caltrans. (2013). Seismic design criteria, version 1.7, California Dept. of Transportation, Sacramento, CA.
CEN (European Committee for Standardization). (2005). “Design provisions of structures for earthquake resistance. 2: Bridges.” EN 1998-2, Brussels, Belgium.
Chen, L. (2010). “An integral approach for large deflection cantilever beams.” Int. J. Non Linear Mech., 45(3), 301–305.
Dowell, R. K., and Hines, E. M. (2002). “Plastic hinge length of reinforced concrete bridge columns.” Proc., 3rd National Seismic Conf. and Workshop on Bridges and Highways, Multidisciplinary Center for Earthquake Engineering Research, Buffalo, NY, 332–334.
Galambos, T. V., and Surovek, A. E. (2008). Structural stability of steel: Concepts and applications for structural engineers, Wiley, Hoboken, NJ.
Goodnight, J., Kowalsky, M., and Nau, J. (2016). “Modified plastic-hinge method for circular RC bridge columns.” J. Struct. Eng., 04016103.
Hines, E. M., Restrepo, J. I., and Seible, F. (2004). “Force-displacement characterization of well-confined bridge piers.” ACI Struct. J., 101(4), 537–548.
Lee, K. (2002). “Large deflections of cantilever beams of non-linear elastic material under a combined loading.” Int. J. Non Linear Mech., 37(3), 439–443.
Mander, J. (1984). “Seismic design of bridge piers.” Ph.D. dissertation, Univ. of Canterbury, Christchurch, New Zealand.
Mander, J., Priestley, M., and Park, R. (1988). “Theoretical stress-strain model for confined concrete.” J. Struct. Eng., 1804–1826.
Mortezaei, A., and Ronagh, H. R. (2012). “Plastic hinge length of FRP strengthened reinforced concrete columns subjected to both far-fault and near-fault ground motions.” Scientia Iranica, 19(6), 1365–1378.
Pam, H. J., and Ho, J. C. M. (2009). “Length of critical region for confinement steel in limited ductility high-strength reinforced concrete columns.” Eng. Struct., 31(12), 2896–2908.
Paulay, T., and Priestley, J. N. (1992). Seismic design of reinforced concrete and masonry buildings, Wiley, New York.
Priestley, M., and Park, R. (1987). “Strength and ductility of concrete bridge columns under seismic loading.” ACI Struct. J., 84(1), 61–76.
Priestley, M. J. N., Calvi, G. M., and Kowalsky, M. J. (2007). Displacement-based seismic design of structures, Istituto Universitario di Studi Superiori Press, Pavia, Italy.
Spacone, E., Ciampi, V., and Filippou, F. C. (1996a). “Mixed formulation of nonlinear beam finite element.” Comput. Struct., 58(1), 71–83.
Spacone, E., Filippou, F. C., and Taucer, F. F. (1996b). “Fibre beam-column model for non-linear analysis of R/C frames. I: Formulation.” Earthquake Eng. Struct. Dyn., 25(7), 711–725.
Wang, C.-K., Salmon, C. G., and Pincheira, J. A. (2006). Reinforced concrete design, 7th Ed., Wiley, Hoboken, NJ.
Wang, C. Y. (1981). “Large deflections of an inclined cantilever with an end load.” Int. J. Nonlinear Mech., 16(2), 155–164.
Zhao, X.-M., Wu, Y.-F., and Leung, A. Y. T. (2012). “Analyses of plastic hinge regions in reinforced concrete beams under monotonic loading.” Eng. Struct., 34(1), 466–482.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Nov 3, 2016
Accepted: Mar 22, 2017
Published online: Jun 24, 2017
Published in print: Sep 1, 2017
Discussion open until: Nov 24, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.