Optimum Value of Negative Stiffness and Additional Damping in Civil Structures
Publication: Journal of Structural Engineering
Volume 143, Issue 8
Abstract
The negative stiffness (NS) phenomenon and additional supplemental damping (AD) were proposed and investigated in recent years. Despite the bulk of literature on the base shear reduction for structures with the NS at the base or on the first story, the application of the NS and AD in the stories of a superstructure was barely studied. Considering the implementation of the NS and AD in a passive way, this paper proposes an innovative approach to optimize the NS and AD values on the different stories of civil structures. First, the formulation is derived to convert the optimization of NS and AD to the static feedback decentralized controller design problem. Then, the controller is searched by homotopy path, which leads to a local optimal solution. Finally, the procedure is validated by a 20-story benchmark structural model.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank Prof. Satish Nagarajaiah of Rice University for introducing the negative stiffness concept and Prof. Yang Wang of Georgia Institute of Technology for insightful opinions about the decentralized control. This research is jointly funded by the National Natural Science Foundation of China (51261120375, 51408099) and the China Postdoctoral Science Foundation (2014M560210, 2015T80253).
References
Agrawal, A. K., and Yang, J. N. (1999). “Design of passive energy dissipation systems based on LQR control methods.” J. Intell. Mater. Syst. Struct., 10(12), 933–944.
Attary, N., et al. (2015). “Numerical simulations of a highway bridge structure employing passive negative stiffness device for seismic protection.” Earthquake Eng. Struct., 44(6), 973–995.
Cao, Y.-Y., Sun, Y.-X., and Mao, W.-J. (1998). “Output feedback decentralized stabilization: ILMI approach.” Syst. Control Lett., 35(3), 183–194.
Chiang, R. Y., and Safonov, M. G. (1998). MATLAB robust control toolbox, MathWorks, Inc., Natick, MA.
Gahinet, P., and Apkarian, P. (1994). “A linear matrix inequality approach to control.” Int. J. Robust Nonlin., 4(4), 421–448.
Grant, M., Boyd, S., and Ye, Y. (2008). “CVX: Matlab software for disciplined convex programming (web page and software).” CVX Research, Inc., Austin, TX.
Huang, X., Chen, Y., Hua, H., Liu, X., and Zhang, Z. (2015). “Shock isolation performance of a nonlinear isolator using Euler buckled beam as negative stiffness corrector: Theoretical and experimental study.” J. Sound Vib., 345, 178–196.
Leibfritz, F. (2001). “An LMI-based algorithm for designing suboptimal static output feedback controllers.” SIAM J. Control Optim., 39(6), 1711–1735.
Lofberg, J. (2004). “YALMIP: A toolbox for modeling and optimization in MATLAB.” IEEE Int. Symp. on Computer Aided Control Systems Design, IEEE, Piscataway, NJ.
Nagarajaiah, S., Reinhorn, A. M., Constantinou, M. C., Taylor, D., Pasala, D. T. R., and Sarlis, A. A. (2010). “Adaptive negative stiffness: A new structural modification approach for seismic protection.” Proc., 5th World Conf. on Structural Control and Monitoring, International Association of Structural Control and Monitoring, Los Angeles.
Pasala, D. T. R., Sarlis, A. A., Nagarajaiah, S., Reinhorn, A. M., Constantinou, M. C., and Taylor, D. (2013). “Adaptive negative stiffness: A new structural modification approach for seismic protection.” J. Struct. Eng., 1112–1123.
Pasala, D. T. R., Sarlis, A. A., Nagarajaiah, S., Reinhorn, A. M., Constantinou, M. C., and Taylor, D. P. (2012). “Negative stiffness device for seismic response control of multi-story buildings.” Proc., 20th Analysis and Computation Specialty Conf., Structural Engineering Institute of ASCE, Reston, VA.
Pasala, D. T. R., Sarlis, A. A., Reinhorn, A. M., Nagarajaiah, S., Constantinou, M. C., and Taylor, D. (2014). “Simulated bilinear-elastic behavior in a SDOF elastic structure using negative stiffness device: Experimental and analytical study.” J. Struct. Eng., .
Ray, T., Reinhorn, A. M., and Nagarajaiah, S. (2013). “Nonlinear elastic and inelastic spectra with inherent and supplemental damping.” Earthquake Eng. Struct. Dyn., 42(14), 2151–2165.
Reinhorn, A. M., Viti, S., and Cimellaro, G. P. (2005). “Retrofit of structures: Strength reduction with damping enhancement.” Proc., 37th UJNR Panel Meeting on Wind and Seismic Effects, Public Works Research Institute, Tsukuba, Japan.
Rubió-Massegú, J., Palacios-Quiñonero, F., and Rossell, J. M. (2012). “Decentralized static output-feedback controller design for buildings under seismic excitation.” Earthquake Eng. Struct., 41(7), 1199–1205.
Sarlis, A. A., Pasala, D. T. R., Constantinou, M. C., Reinhorn, A. M., Nagarajaiah, S., and Taylor, D. (2013a). “Negative stiffness device for seismic protection of structures.” J. Struct. Eng., 1124–1133.
Sarlis, A. A., Pasala, D. T. R., Constantinou, M. C., Reinhorn, A. M., Nagarajaiah, S., and Taylor, D. P. (2013b) “Negative stiffness device for seismic protection of structures.” Multidisciplinary Center for Earthquake Engineering Research, State Univ. of New York at Buffalo, Buffalo, NY.
Viti, S., Cimellaro, G. P., and Reinhorn, A. M. (2006). “Retrofit of a hospital through strength reduction and enhanced damping.” Smart Struct. Syst., 2(4), 339–355.
Wang, Y. (2011). “Time-delayed dynamic output feedback controller design for civil structures: A decentralized approach through homotopic transformation.” Struct. Control Health., 18(2), 121–139.
Wang, Y., Lynch, J. P., and Law, K. H. (2009). “Decentralized controller design for large-scale civil structures.” Earthquake Eng. Struct., 38(3), 377–401.
Wang, Y., Swartz, R. A., Lynch, J. P., Law, K. H., Lu, K. C., and Loh, C. H. (2006). “Decentralized civil structural control using a real-time wireless sensing and control system.” Proc., 4th World Conf. on Structural Control and Monitoring, International Association of Structural Control and Monitoring, Los Angeles.
Wu, W., Chen, X., and Shan, Y. (2014). “Analysis and experiment of a vibration isolator using a novel magnetic spring with negative stiffness.” J. Sound Vib., 333(13), 2958–2970.
Yang, J. N., Lin, S., Kim, J. H., and Agrawal, A. K. (2002). “Optimal design of passive energy dissipation systems based on and H2 performances.” Earthquake Eng. Struct., 31(4), 921–936.
Zhai, G., Ikeda, M., and Fujisaki, Y. (2001). “Decentralized controller design: A matrix inequality approach using a homotopy method.” Automatica, 37(4), 565–572.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Mar 8, 2016
Accepted: Jan 17, 2017
Published online: Mar 24, 2017
Published in print: Aug 1, 2017
Discussion open until: Aug 24, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.