Fluidic Self-Centering Devices as Elements of Seismically Resistant Structures: Description, Testing, Modeling, and Model Validation
Publication: Journal of Structural Engineering
Volume 143, Issue 7
Abstract
Fluidic self-centering devices operate on principles similar to those of fluid viscous dampers, but with additional capabilities to provide recentering force (or preload) and stiffness. The functions of preload, stiffness, and damping are entirely controlled by the physical properties, volume, and initial pressure of fluid, and the shaping of the orifices. They are characterized by compactness in comparison to the output force and stroke. They are proposed as self-centering bracing systems for buildings. This paper presents: (1) a description of the behavior of these devices that is on the basis of principles of mechanics, (2) models of behavior of the devices, (3) results of testing of a number of these devices to demonstrate their behavior, and (4) validation of the analytical models. The test results include those of two devices tested over a period of 22 years that demonstrate the stability of the properties of the devices.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the financial support by the Japan Student Services Organization (JASSO) Student Exchange Support Program in terms of a scholarship (stipend and tuition) for long-term study abroad to the first author. This support is greatly appreciated. Moreover, the authors acknowledge support in terms of hardware, access to test facilities, and time of the engineering staff at Taylor Devices, Inc. of North Tonawanda, NY. The authors are grateful to Mr. Douglas P. Taylor, President, and Mr. Alan Klembczyk, Vice President, of Taylor Devices for their support and for many inspiring discussions.
References
ASCE. (2010). “Minimum design loads for buildings and other structures.” SEI/ASCE 7-10, Reston, VA.
ASCE. (2016). “Minimum design loads for buildings and other structures.” SEI/ASCE 7-16, Reston, VA.
ASM. (2002). “Thermal properties of metals.” Materials Park, OH.
Christopoulos, C., and Filiatrault, A. (2006). Principles of Passive Supplemental Damping and Seismic Isolation, IUSS Press, Pavia, Italy.
Christopoulos, C., Filiatrault, A., and Folz, B. (2002). “Seismic response of self-centering hysteretic SDOF systems.” Earthquake Eng. Struct. Dyn., 31(5), 1131–1150.
Christopoulos, C., Tremblay, R., Kim, H.-J., and Lacerte, M. (2008). “Self-centering energy dissipative bracing system for the seismic resistance of structures: Development and validation.” J. Struct. Eng., 96–107.
Constantinou, M. C., Mokha, A., and Reinhorn, A. (1990). “Teflon bearing in base isolation. II: Modeling.” J. Struct. Eng., 455–474.
Constantinou, M. C., Reinhorn, A. M., Mokha, A., and Watson, R. (1991). “Displacement control device for base-Isolated bridges.” Earthquake Spectra, 7(2), 179–200.
Constantinou, M. C., Soong, T. T., and Dargush, G. F. (1998). “Passive energy dissipation systems for structural design and retrofit.”, Multidisciplinary Center for Earthquake Engineering Research, Buffalo, NY.
Eatherton, M. R., Fahnestock, L. A., and Miller, D. J. (2014). “Computational study of self-centering buckling-restrained braced frame seismic performance.” Earthquake Eng. Struct. Dyn., 43(13), 1897–1914.
Erochko, J. (2013). “Improvements to the design and use of post-tensioned self-centering energy-dissipative (SCED) braces.” Ph.D. thesis, Univ. of Toronto, Toronto.
Erochko, J., Christopoulos, C., and Tremblay, R. (2014a). “Design and testing of an enhancedelongation telescoping self-centering energy-dissipative brace.” J. Struct. Eng., 315–336.
Erochko, J., Christopoulos, C., and Tremblay, R. (2014b). “Design, testing, and detailed component modeling of a high-capacity self-centering energy-dissipative brace.” J. Struct. Eng., 315–336.
Erochko, J., Christopoulos, C., and Tremblay, R. (2015a). “Design and testing of an enhanced-elongation telescoping self-centering energy-dissipative brace.” J. Struct. Eng.,.
Erochko, J., Christopoulos, C., and Tremblay, R. (2015b). “Design, testing, and detailed component modeling of a high-capacity self-centering energy-dissipative brace.” J. Struct. Eng.,.
Erochko, J., Christopoulos, C., Tremblay, R., and Choi, H. (2011). “Residual drift response of SMRFs and BRB frames in steel buildings designed according to ASCE 7-05.” J. Struct. Eng., 589–599.
FEMA. (2015). “NEHRP recommended seismic provisions for new buildings and other structures.”, Vol. I, Washington, DC.
Kammula, V., Erochko, J., Kwon, O.-S., and Christopoulos, C. (2014). “Application of hybrid-simulation to fragility assessment of the telescoping self-centering energy dissipative bracing system.” Earthquake Eng. Struct. Dyn., 43(6), 811–830.
Kawashima, K., MacRae, G. A., Hoshikuma, J., and Nagaya, K. (1998). “Residual displacement response spectrum.” J. Struct. Eng., 523–530.
Kitayama, S., and Constantinou, M. C. (2016a). “Development and evaluation of procedures for analysis and design of buildings with fluidic self-centering system.”, Multidisciplinary Center for Earthquake Engineering Research, Buffalo, NY.
Kitayama, S., and Constantinou, M. C. (2016b). “Probabilistic collapse resistance and residual drift assessment of buildings with fluidic self-centering systems.” Earthquake Eng. Struct. Dyn., 45(12), 1935–1953.
Kurama, Y. C. (2000). “Seismic design of unbonded post-tensioned precast concrete walls with supplemental viscous damping.” ACI Struct. J., 97(4), 648–658.
MacRae, G. A., and Kawashima, K. (1997). “Post-earthquake residual displacements of bilinear oscillators.” Earthquake Eng. Struct. Dyn., 26(7), 701–716.
MacRae, G. A., and Priestley, M. J. N. (1994). “Precast post-tensioned ungrouted concrete beam-column subassemblage tests.”, Dept. of Applied Mechanics and Engineering Sciences, Univ. of California, San Diego.
McKenna, F. T. (1997). “Object-oriented finite element programming: Frameworks for analysis, algorithms and parallel computing.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Univ. of California, Berkeley, CA.
McVitty, W. J., and Constantinou, M. C. (2015). “Property modification factors for seismic isolators: Design guidance for buildings.”, Multidisciplinary Center for Earthquake Engineering Research, Buffalo, NY.
OpenSees [Computer software]. PEER, Berkeley, CA.
Priestley, M. J. N., and Tao, J. R. (1993). “Seismic response of precast prestressed concrete frames with partially debonded tendons.” PCI J., 38(1), 58–69.
Ramirez, O. M., et al. (2001). “Development and evaluation of simplified procedures for analysis and design of buildings with passive energy dissipation systems.”, Multidisciplinary Center for Earthquake Engineering Research, Buffalo, NY.
Ricles, J. M., Sause, R., Garlock, M. M., and Zhao, C. (2001). “Posttensioned seismic-restraint connections for steel frames.” J. Struct. Eng., 113–121.
Ruiz-Garcia, J., and Miranda, E. (2006a) “Evaluation of residual drift demands in regular multi-storey frames for performance-based seismic assessment.” Earthquake Eng. Struct. Dyn., 35(13), 1609–1629.
Ruiz-Garcia, J., and Miranda, E. (2006b). “Residual displacement ratios for assessment of existing structures.” Earthquake Eng. Struct. Dyn., 35(3), 315–336.
Stanton, J. F., and Nakaki, S. D. (2002). “Design guidelines for precast concrete structural systems.”, Dept. of Civil Engineering, Univ. of Washington, Seattle.
Symans, M. D., and Constantinou, M. C. (1995). “Development and experimental study of semi-active fluid damping devices for seismic protection of structures.”, National Center for Earthquake Engineering Research, Buffalo, NY.
Taisei. (1993). “Taisei-NCEER complementary research report on the development of seismic isolation systems for bridges: Shake table experiment of passive sliding bearing isolation system.”, Technical Research Institute (in Japanese).
Tremblay, R., Lacerte, M., and Christopoulos, C. (2008). “Seismic response of multistory buildings with self-centering energy dissipative steel braces.” J. Struct. Eng., 108–120.
Tsopelas, P., and Constantinou, M. C. (1994). “NCEER-Taisei research program on sliding seismic isolation systems for bridges: Experimental and analytical study of a system consisting of sliding bearings and fluid restoring force/damping devices.”, National Center for Earthquake Engineering Research, Buffalo, NY.
Wen, Y. K. (1976). “Method of random vibration of hysteretic systems.” J. Engrg. Mech. Div., 102(2), 249–263.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Sep 15, 2015
Accepted: Dec 21, 2016
Published ahead of print: Mar 9, 2017
Published online: Mar 10, 2017
Published in print: Jul 1, 2017
Discussion open until: Aug 10, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.