Multihazard Risk Assessment of Electric Power Systems
Publication: Journal of Structural Engineering
Volume 143, Issue 3
Abstract
Electric power systems are susceptible to damage due to natural hazards such as hurricanes and earthquakes. Considerable effort has been made to develop methodologies for assessing the reliability of electric power systems under a single hazard such as hurricanes or earthquakes. However, there are parts of the world, such as the coastal areas of South Carolina, which are affected by both hazards. In such regions, more comprehensive risk assessment can be achieved when the focus is shifted from single-hazard to multihazard analysis. There is, therefore, a need to develop methods for quantifying the risk posed by the combined effect of multiple hazards on structures and infrastructure systems in these regions. This paper presents a framework for multihazard risk assessment of electric power systems subjected to seismic and hurricane wind hazards. The framework includes hazard and structural component vulnerability models, system reliability analysis, and multihazard risk assessment. A notional electric power network assumed to be located in Charleston, New York, and Seattle is used to demonstrate the proposed framework. The framework can be used for predisaster preparation, mitigation, and postdisaster response planning.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research described in this paper was supported, in part, by the National Science Foundation (NSF) Catalyzing New International Collaborations Program, and Infrastructure Management and Extreme Events Program under Grant No. NSF-1050443. This support is gratefully acknowledged. However, the writers take sole responsibility for the views expressed in this paper, which may not represent the position of the NSF or their respective institutions.
References
Adachi, T., and Ellingwood, B. R. (2010). “Comparative assessment of civil infrastructure network performance under probabilistic and scenario earthquakes.” J. Infrastruct. Syst., 1–10.
ArcGIS [Computer software]. ESRI, Redlands, CA.
ASCE. (2005). “Minimum design loads for buildings and other structures.” Reston, VA.
ASCE. (2009). “Guidelines for electrical transmission line structural loading.” ASCE 74, Reston, VA.
ASCE. (2010). “Minimum design loads for building and other structures.” ASCE 7, Reston, VA.
ATC (Applied Technology Council). (2015). “Windspeed by location.” ⟨http://windspeed.atcouncil.org/⟩ (Jun. 25, 2015).
Bell, R., and Glade, T. (2004). Multi-hazard analysis in natural risk assessments, WIT Press, Boston.
Bradley, B. A., Dhakal, R. P., Cubrinovski, M., Mander, J. B., and MacRae, G. A. (2007). “Improved seismic hazard model with application to probabilistic seismic demand analysis.” Earthquake Eng. Struct. Dyn., 36(14), 2211–2225.
Brown, R. E. (2009). “Cost-benefit analysis of the deployment of utility infrastructure upgrades and storm hardening programs.” Quanta Technology, Raleigh, NC.
Carpignano, A., Golia, E., Di Mauro, C., Bouchon, S., and Nordvik, J. P. (2009). “A methodological approach for the definition of multi-risk maps at regional level: First application.” J. Risk Res., 12(3–4), 513–534.
Cornell, C. A., Jalayer, F., Hamburger, R. O., and Foutch, D. A. (2002). “Probabilistic basis for 2000 SAC federal emergency management agency steel moment frame guidelines.” J. Struct. Eng., 526–533.
Davidson, R. A., Liu, H., Sarpong, K., Sparks, P., and Rosowsky, D. V. (2003). “Electric power distribution system performance in Carolina hurricanes.” Nat. Hazard. Rev., 36–45.
Dong, X., Shinozuka, M., and Chang, S. (2004). “Utility power network systems.” Proc., 13th World Conf. on Earthquake Engineering, International Association for Earthquake Engineering, Tokyo.
Dueñas-Osorio, L., Craig, J. I., and Goodno, B. J. (2007). “Seismic response of critical interdependent networks.” Earthquake Eng. Struct. Dyn., 36(2), 285–306.
Dueñas-Osorio, L., and Hernandez-Fajardo, I. (2008). “Flow-based reliability assessment of infrastructure systems.” 14th World Conf. on Earthquake Engineering (14WCEE), International Association for Earthquake Engineering, Tokyo.
Eidinger, J. (2009). “Wenchuan earthquake impact to power systems.” TCLEE 2009, Lifeline Earthquake Engineering in a Multihazard Environment, ASCE, Reston, VA, 1359–1370.
Eidinger, J., and Kempner, J. L. (2012). “Risk assessment of transmission system under earthquake loading.” Electrical Transmission and Substation Structures 2012@ Solutions to Building the Grid of Tomorrow, ASCE, Reston, VA.
Ellingwood, B. R., and Wen, Y. K. (2005). “Risk-benefit-based design decisions for low-probability/high consequence earthquake events in Mid-America.” Prog. Struct. Eng. Mater., 7(2), 56–70.
Esary, J., and Proschan, F. (1963). “Coherent structures of non-identical components.” Technometrics, 5(2), 191–209.
FEMA. (2009). “NEHRP recommended seismic provisions for new buildings and other structures.” FEMA P-750/2009, Washington, DC.
FEMA. (2010). “Multi-hazard loss estimation methodology, earthquake model: Hazus-MH 2.1 technical manual.” Washington, DC.
FEMA. (2011). “Multi-hazard loss estimation methodology, hurricane model: Hazus-MH 2.1 technical manual.” Washington, DC.
Fieldstadt E. (2015). “Seattle-area windstorm leaves 2 dead, thousands without power.” ⟨http://www.nbcnews.com/news/weather/seattle-area-windstorm-leaves-2-dead-thousands-without-power-n418481⟩ (Nov. 25, 2015).
Holland, G. J. (1980). “An analytic model of the wind and pressure profiles in hurricanes.” Monthly Weather Review, 108(8), 1212–1218.
Jalayer, F. (2003). “Direct probabilistic seismic analysis: Implementing non-linear dynamic assessments.” Stanford Univ., Stanford, CA.
Javanbarg, M., Scawthorn, C., Kiyono, J., and Ono, Y. (2009). “Minimal path sets seismic reliability evaluation of lifeline networks with link and node failures.” Proc., Lifeline Earthquake Engineering in a Multihazard Environment, ASCE, Reston, VA.
Jayaram, N., and Baker, J. (2010). “Probabilistic seismic lifeline risk assessment using efficient sampling and data reduction techniques.” Stanford Univ., Stanford, CA.
Jensen, P. A., and Bellmore, M. (1969). “An algorithm to determine the reliability of a complex system.” Reliab. IEEE Trans. on, R-18(4), 169–174.
Kameshwar, S., and Padgett, J. E. (2014). “Multi-hazard risk assessment of highway bridges subjected to earthquake and hurricane hazards.” Eng. Struct., 78, 154–166.
Kappes, M. S., Keiler, M., von Elverfeldt, K., and Glade, T. (2012). “Challenges of analyzing multi-hazard risk: A review.” Nat. Hazards, 64(2), 1925–1958.
Kim, Y., and Kang, W.-H. (2013). “Network reliability analysis of complex systems using a non-simulation-based method.” Reliab. Eng. Syst. Saf. 110, 80–88.
Knabb, R. D., Rhome, J. R., and Brown, D. P. (2005). “Tropical cyclone report: Hurricane Katrina.” National Hurricane Center, Miami.
LaRocca, S., Johansson, J., Hassel, H., and Guikema, S. (2015). “Topological performance measures as surrogates for physical flow models for risk and vulnerability analysis for electric power systems.” Risk Anal., 35(4), 608–623.
Li, Y. (2012). “Assessment of damage risks to residential buildings and cost–benefit of mitigation strategies considering hurricane and earthquake hazards.” J. Perform. Constr. Facil., 7–16.
Li, Y., Ahuja, A., and Padgett, J. E. (2012). “Review of methods to assess, design for, and mitigate multiple hazards.” J. Perform. Constr. Facil., 104–117.
Li, Y., and Ellingwood, B. R. (2006). “Hurricane damage to residential construction in the US: Importance of uncertainty modeling in risk assessment.” Eng. Struct., 28(7), 1009–1018.
Li, Y., and Ellingwood, B. R. (2009). “Framework for multihazard risk assessment and mitigation for wood-frame residential construction.” J. Struct. Eng., 159–168.
Marzocchi, W., Garcia-Aristizabal, A., Gasparini, P., Mastellone, M. L., and Di Ruocco, A. (2012). “Basic principles of multi-risk assessment: A case study in Italy.” Nat. Hazards, 62(2), 551–573.
Ming, X., Xu, W., Li, Y., Du, J., Liu, B., and Shi, P. (2015). “Quantitative multi-hazard risk assessment with vulnerability surface and hazard joint return period.” Stochastic Environ. Res. Risk Assess., 29(1), 35–44.
Mosquera-Machado, S., and Dilley, M. (2009). “A comparison of selected global disaster risk assessment results.” Nat. Hazards, 48(3), 439–456.
NOAA (National Oceanic and Atmospheric Administration). (1990). “Natural disaster survey report: Hurricane Hugo.” Silver Springs, MD.
NOAA (National Oceanic and Atmospheric Administration). (2005). “National oceanic and atmospheric administration: Hurricane Rita.” National Oceanic and Atmospheric Administration, Washington, DC.
NOAA (National Oceanic and Atmospheric Administration). (2015). “Detailed list of continental United States hurricane impacts/landfalls 1851–1960, 1983–2015.” ⟨http://www.aoml.noaa.gov/hrd/hurdat/UShurrs_detailed.html⟩ (May 10, 2015).
Noda, M. (2001). “Disaster and restoration of electricity supply system by Hanshin-Awaji earthquake.” APEC Seminar on Earthquake Disaster Management of Energy Supply Systems, Energy Commission, Ministry of Economic Affairs, Taipei, Taiwan, ROC.
Ouyang, M., and Dueñas-Osorio, L. (2011). “An approach to design interface topologies across interdependent urban infrastructure systems.” Reliab. Eng. Syst. Saf., 96(11), 1462–1473.
Ouyang, M., Dueñas-Osorio, L., and Min, X. (2012). “A three-stage resilience analysis framework for urban infrastructure systems.” Struct. Saf., 36, 23–31.
Pasch, R. J., Blake, E. S., III, and Roberts, D. P. (2006). “Tropical cyclone report: Hurricane Wilma.” National Hurricane Center, Washington, DC.
Petersen, M. D., et al. (2014). “Documentation for the 2014 update of the United States national seismic hazard maps.” U.S. Geological Survey, Reston, VA.
Philipson, L., and Willis, H. L. (2006). Understanding electric utilities and de-regulation, 2nd Ed., CRC Press, Boca Raton, FL.
Romero, N., Nozick, L. K., Dobson, I., Xu, N., and Jones, D. A. (2015). “Seismic retrofit for electric power systems.” Earthquake Spectra, 31(2), 1157–1176.
Ryan, P. C., Stewart, M. G., Spencer, N., and Li, Y. (2014). “Reliability assessment of power pole infrastructure incorporating deterioration and network maintenance.” Reliab. Eng. Syst. Saf., 132, 261–273.
Salman, A. M., and Li, Y. (2015). “Assessing climate change impact on system reliability of power distribution systems subjected to hurricanes.” J. Infrastruct. Syst., .
Salman, A. M., Li, Y., and Stewart, M. G. (2015). “Evaluating system reliability and targeted hardening strategies of power distribution systems subjected to hurricanes.” Reliab. Eng. Syst. Saf., 144, 319–333.
Sewell, R. T., Toro, G. R., and McGuire, R. K. (1996). “Impact of ground motion characterization on conservatism and variability in seismic risk estimates.” Division of Engineering Technology, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, Rockville, MD.
Shelby County Government. (2015). “Electricity, gas and water.” ⟨https://www.shelbycountytn.gov/index.aspx?NID=503⟩ (Oct. 13, 2015).
Shinozuka, M., Dong, X., Jin, X., and Cheng, T. (2005). “Seismic performance analysis for the LADWP power system.” Transmission and Distribution Conf. and Exhibition: Asia and Pacific, IEEE/PES, Piscataway, NJ.
Shinozuka, M., Rose, A., and Eguchi, R. (1998). “Engineering and socioeconomic impacts of earthquakes.” Multidisciplinary Center for Earthquake Engineering Research, Buffalo, NY.
Song, J., and Ok, S. Y. (2010). “Multi-scale system reliability analysis of lifeline networks under earthquake hazards.” Earthquake Eng. Struct. Dyn., 39(3), 259–279.
Taras, A., Ratel, G., and Chouinard, L. (2004). “A life-cycle cost approach to the maintenance of overhead line supports.” Proc., 11th IFIP WG7. 5 Working Conf. on Reliability and Optimization of Structural Systems, Taylor & Francis, London.
Toro, G. R., Abrahamson, N. A., and Schneider, J. F. (1997). “Model of strong ground motions from earthquakes in central and eastern North America: Best estimates and uncertainties.” Seismol. Res. Lett., 68(1), 41–57.
USGS. (2015a). “Hazard curve application.” ⟨http://geohazards.usgs.gov/hazardtool/application.php⟩ (Sep. 25, 2015).
USGS. (2015b). “Historic earthquakes.” ⟨http://earthquake.usgs.gov/earthquakes/states/events/1886_09_01.php⟩ (Oct. 13, 2015).
Vanzi, I. (1996). “Seismic reliability of electric power networks: Methodology and application.” Struct. Saf., 18(4), 311–327.
Vickery, P. J., Masters, F. J., Powell, M. D., and Wadhera, D. (2009). “Hurricane hazard modeling: The past, present, and future.” J. Wind Eng. Ind. Aerodyn., 97(7), 392–405.
Vickery, P. J., Skerlj, P., Steckley, A., and Twisdale, L. (2000a). “Hurricane wind field model for use in hurricane simulations.” J. Struct. Eng., 1203–1221.
Vickery, P. J., Skerlj, P., and Twisdale, L. (2000b). “Simulation of hurricane risk in the U.S. using empirical track model.” J. Struct. Eng., 1222–1237.
Volkanovski, A., Čepin, M., and Mavko, B. (2009). “Application of the fault tree analysis for assessment of power system reliability.” Reliab. Eng. Syst. Saf., 94(6), 1116–1127.
Winkler, J., Dueñas-Osorio, L., Stein, R., and Subramanian, D. (2010). “Performance assessment of topologically diverse power systems subjected to hurricane events.” Reliab. Eng. Syst. Saf., 95(4), 323–336.
Xing, J., Feng, C., Qian, X., and Dai, P. (2012). “A simple algorithm for sum of disjoint products.” 2012 Annual Reliability and Maintainability Symp. (RAMS), IEEE, Piscataway, NJ.
Xu, L., and Brown, R. E. (2008). “A hurricane simulation method for Florida utility damage and risk assessment.” Power and Energy Society General Meeting—Conversion and Delivery of Electrical Energy in the 21st Century, IEEE, Piscataway, NJ.
Yang, H., and Shaoping, S. (2003). “Seismic reliability of urban pipeline network systems.” Advancing Mitigation Technologies and Disaster Response for Lifeline Systems, ASCE, Reston, VA.
Information & Authors
Information
Published In
Copyright
©2016 American Society of Civil Engineers.
History
Received: Nov 30, 2015
Accepted: Sep 1, 2016
Published online: Oct 20, 2016
Published in print: Mar 1, 2017
Discussion open until: Mar 20, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.