Surrogate Modeling for the Seismic Performance Assessment of Liquid Storage Tanks
Publication: Journal of Structural Engineering
Volume 143, Issue 4
Abstract
A three-dimensional surrogate model is presented for the seismic performance assessment of cylindrical atmospheric liquid storage tanks. The proposed model consists of a concentrated fluid mass attached to a single vertical beam-column element that rests on rigid beam-spokes with edge springs. The model is suitable for rapid static and dynamic seismic performance assessment. Contrary to other simplified models for tanks, its properties are determined through a simple structural analysis that can be performed in any nonlinear analysis software, without the need for complex finite-element models. The results compare favorably to those of three-dimensional finite-element models on three tanks of varying aspect ratios. A step-by-step example of the modeling procedure is presented for a squat unanchored tank, and a sensitivity analysis is conducted in order to investigate the effect of various modeling parameters on the seismic response of the proposed tank model.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research has been co-financed by the European Union [European Social Fund (ESF)] and Greek national funds through the Operational Program “Education and Lifelong Learning” of the National Strategic Reference Framework (NSRF)—Research Funding Program: THALES. Investing in knowledge society through the European Social Fund.
References
ABAQUS [Computer software]. Dassault Systèmes, Waltham, MA.
Ahari, M. N., Eshghi, S., and Ashtiany, M. G. (2009). “The tapered beam model for bottom plate uplift analysis of unanchored cylindrical steel storage tanks.” Eng. Struct., 31(3), 623–632.
American Petroleum Institute. (2007). “Seismic design of storage tanks—Appendix E, welded steel tanks for oil storage.”, Washington, DC.
Buratti, N., and Tavano, M. (2014). “Dynamic buckling and seismic fragility of anchored steel tanks by the added mass method.” Earthquake Eng. Struct. Dyn., 43(1), 1–21.
Calvi, G. M., and Nascimbene, R. (2011). “Progettazione sismica dei serbatoi.” Progettare i gusci, IUSS Press, Pavia, Italy, 537–672 (in Italian).
CEN (European Committee for Standardization). (2006). “Design of structures for earthquake resistance—Part 4: Silos, tanks and pipelines.”, Brussels, Belgium.
Cortes, G., Prinz, G. S., Nussbaumer, A., and Koller, M. G. (2012). “Cyclic demand at the shell-bottom connection of unanchored steel tanks.” Proc., 15th World Conf. on Earthquake Engineering, Sociedade Portuguesa de Engenharia Sismica (SPES), Lisbon, Portugal.
De Angelis, M., Giannini, R., and Paolacci, F. (2009). “Experimental investigation on the seismic response of a steel liquid storage tank equipped with floating roof by shaking table tests.” Earthquake Eng. Struct. Dyn., 39(4), 377–396.
FEMA (Federal Emergency Management Agency). (2009). “Quantification of building seismic performance factors.”, Applied Technology Council for Federal Emergency Management Agency, Washington, DC.
Girgin, S. (2011). “The natech events during the 17 August 1999 Kocaeli earthquake: Aftermath and lessons learned.” Nat. Hazards Earth Syst. Sci., 11(4), 1129–1140.
Hatayama, K. (2015). “Damage to oil storage tanks due to tsunami of the Mw9.0 2011 off the Pacific coast of Tohoku, Japan earthquake.” Earthquake Spectra, 31(2), 1103–1124.
Kilic, S., and Ozdemir, Z. (2007). “Simulation of sloshing effects in cylindrical containers under seismic loading.” Proc., 6th LS-DYNA Anwenderforum, DYNAmore, Dresden, Germany.
Luco, N., and Cornell, C. A. (2007). “Structure-specific scalar intensity measures for near-source and ordinary earthquake ground motions.” Earthquake Spectra, 23(2), 357–392.
Malhotra, P. K. (1997). “Seismic response of soil-supported unanchored liquid-storage tanks.” J. Struct. Eng., 440–450.
Malhotra, P. K. (2000). “Practical nonlinear seismic analysis of tanks.” Earthquake Spectra, 16(2), 473–492.
Malhotra, P. K. (2005). “Sloshing loads in liquid-storage tanks with insufficient freeboard.” Earthquake Spectra, 21(4), 1185–1192.
Malhotra, P. K., and Veletsos, A. S. (1994a). “Beam model for base-uplifting analysis of cylindrical tanks.” J. Struct. Eng., 3471–3488.
Malhotra, P. K., and Veletsos, A. S. (1994b). “Uplifting analysis of base plates in cylindrical tanks.” J. Struct. Eng., 3489–3505.
Malhotra, P. K., and Veletsos, A. S. (1994c). “Uplifting response of unanchored liquid-storage tanks.” J. Struct. Eng., 3525–3547.
Malhotra, P. K., Wenk, T., and Wieland, M. (2000). “Simple procedure for seismic analysis of liquid-storage tanks.” Struct. Eng. Int., 10(3), 197–201.
McKenna, F., and Fenves, G. L. (2001). The OPENSEES command language manual, 1.2 Ed., Pacific Earthquake Engineering Research Center, Univ. of California, Berkeley, CA.
Ormeño, M., Larkin, T., and Chouw, N. (2015). “The effect of seismic uplift on the shell stresses of liquid-storage tanks.” Earthquake Eng. Struct. Dyn., 44(12), 1979–1996.
Priestley, M. J. N., Wood, J. H., and Davidson, B. J. (1986). “Seismic design of storage tanks.” Bull. N. Z. Soc. Earthquake Eng., 19(4), 272–284.
Rotter, J. M. (2006). “Elephant’s foot buckling in pressurised cylindrical shells.” Stahlbau, 75(9), 742–747.
Talaslidis, D. G., Manolis, G. D., Paraskevopoulos, E., Panagiotopoulos, C., Pelekasis, N., and Tsamopoulos, J. (2004). “Risk analysis of industrial structures under extreme transient loads.” Soil Dyn. Earthquake Eng., 24(6), 435–448.
Vamvatsikos, D., and Cornell, C. A. (2002). “Incremental dynamic analysis.” Earthquake Eng. Struct. Dyn., 31(3), 491–514.
Vathi, M., Pappa, P., and Karamanos, S. A. (2013). “Seismic response of unanchored liquid storage tanks.” Proc., ASME 2013 Pressure Vessels and Piping Division Conf., Paris.
Veletsos, A. S., and Tang, Y. (1990). “Soil-structure interaction effects for laterally excited liquid storage tanks.” Earthquake Eng. Struct. Dyn., 19(4), 473–496.
Virella, J. C., Godoy, L. A., and Suárez, L. E. (2006). “Dynamic buckling of anchored steel tanks subjected to horizontal earthquake excitation.” J. Constr. Steel Res., 62(6), 521–531.
Vrouwenvelder, T. (1997). “The JCSS probabilistic model code.” Struct. Saf., 19(3), 245–251.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Dec 14, 2015
Accepted: Aug 1, 2016
Published online: Oct 25, 2016
Discussion open until: Mar 25, 2017
Published in print: Apr 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.