Refined Process Upcrossing Rate Approach for Estimating Probabilistic Wind Load Effects with Consideration of Directionality
Publication: Journal of Structural Engineering
Volume 143, Issue 1
Abstract
The process upcrossing rate approach remains one of the most popular methods for the estimation of probabilistic wind load effect with consideration of directionality. The accuracy of this approach depends on the adequacy of the parent distribution of directional mean wind speed. The widely used Weibull distribution has been proved to be inadequate in capturing the characteristics of strong wind speed region, thus leading to unsatisfactory estimations when adopted in the process upcrossing rate approach. This study introduces a new mixed distribution model for the parent distribution of mean wind speed in order to provide a better modeling of distribution for strong wind speed region. Within this mixed model, the distribution below a prescribed wind speed threshold is given by an empirical distribution estimated from the observation data directly, whereas above the threshold, it is described in terms of the generalized Pareto distribution (GPD). The performance of the mixed distribution model is examined in estimating the yearly maximum distributions of wind speeds in each direction and regardless of direction. It is further investigated in estimating the wind load effects of buildings with consideration of directionality effect. The uncertainty of wind load effect at a given wind speed and direction is further accounted for. Numerical examples for buildings with various response characteristics demonstrate the effectiveness of the proposed framework.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The support for this work provided in part by NSF Grant No. CMMI-1536108 is greatly acknowledged.
References
ASCE. (1999). “Wind tunnel studies of buildings and structures.” Reston, VA.
Castillo, E., Hadi, A. S., Balakrishnan, N., and Sarabia, J. M. (2005). Extreme value and related models with applications in engineering and science, Wiley, New York.
Chen, X., and Huang, G. (2010). “Estimation of probabilistic extreme wind load effects: Combination of aerodynamic and wind climate data.” J. Eng. Mech., 747–760.
Cook, N. J. (1982). “Towards better estimation of extreme winds.” J. Wind Eng. Ind. Aerodyn., 9(3), 295–323.
Davenport, A. G. (1977). “The prediction of risk under wind loading.” Proc., 2nd Int. Conf. on Structural Safety and Reliability, International Association for Structural Safety and Reliability (IASSAR), 511–538.
Davison, A. C., and Smith, R. L. (1990). “Models for exceedances over high thresholds.” J. R. Stat. Soc. Ser. B (Method.), 52(3), 393–442.
De Haan, L. (1990). “Fighting the arch-enemy with mathematics.” Statistica Neerlandica, 44(2), 45–68.
De Haan, L. (1994). “Extreme value statistics.” Extreme value theory and applications, Springer, 93–122.
De Zea Bermudez, P., and Kotz, S. (2010a). “Parameter estimation of the generalized Pareto distribution—Part I.” J. Stat. Plann. Inference, 140(6), 1353–1373.
De Zea Bermudez, P., and Kotz, S. (2010b). “Parameter estimation of the generalized Pareto distribution—Part II.” J. Stat. Plann. Inference, 140(6), 1374–1388.
Dupuis, D. J. (1998). “Exceedances over high thresholds: A guide to threshold selection.” Extremes, 1(3), 251–261.
Gomes, L., and Vickery, B. J. (1977). “On the prediction of extreme wind speeds from the parent distribution.” J. Wind Eng. Ind. Aerodyn., 2(1), 21–36.
Gong, K., Ding, J., and Chen, X. (2014). “Estimation of long-term extreme response of operational and parked wind turbines: Validation and some new insights.” Eng. Struct., 81, 135–147.
Grigoriu, M. (1984). “Crossing of Non-Gaussian translation process.” J. Eng. Mech., 610–620.
Holmes, J. D., and Moriarty, W. W. (1999). “Application of the generalized Pareto distribution to extreme value analysis in wind engineering.” J. Wind Eng. Ind. Aerodyn., 83(1–3), 1–10.
Irwin, P. A. (2009). “Wind engineering research needs, building codes and project specific studies.” 11th Americas Conf. on Wind Engineering, American Association of Wind Engineering.
Irwin, P. A., Garber, J., and Ho, E. (2005). “Integration of wind tunnel data with full scale wind climate.” Proc., 10th Americas Conf. on Wind Engineering, American Association of Wind Engineering, 132–135.
Isyumov, N., Ho, E., and Case, P. (2014). “Influence of wind directionality on wind loads and responses.” J. Wind Eng. Ind. Aerodyn., 133, 169–180.
Isyumov, N., Mikitiuk, M., Case, P., Lythe, G., and Welburn, A. (2003). “Predictions of wind loads and responses from simulated tropical storm passages.” Proc., 11th Int. Conf. on Wind Engineering, International Association for Wind Engineering.
Lepage, M. F., and Irwin, P. A. (1985). “A technique for combining historical wind data with wind tunnel tests to predict extreme wind loads.” Proc., 5th U.S. National Conf. on Wind Engineering, International Association for Wind Engineering, 6–8.
Lombardo, F. T. (2012). “Improved extreme wind speed estimation for wind engineering applications.” J. Wind Eng. Ind. Aerodyn., 104–106, 278–284.
Naess, A. (1998). “Statistical extrapolation of extreme value data based on the peaks over threshold method.” J. Offshore Mech. Arct. Eng., 120(2), 91–96.
Pandey, M. D., Van Gelder, P. H. A. J. M., and Vrijling, J. K. (2001). “The estimation of extreme quantiles of wind velocity using L-moments in the peaks-over-threshold approach.” Struct. Saf., 23(2), 179–192.
Pandey, M. D., Van Gelder, P. H. A. J. M., and Vrijling, J. K. (2003). “Bootstrap simulations for evaluating the uncertainty associated with peaks-over-threshold estimates of extreme wind velocity.” Environmetrics, 14(1), 27–43.
Rice, S. O. (1944). “Mathematical analysis of random noise.” Bell Syst. Tech. J., 23(3), 282–332.
Sadek, F. (2005). “Federal building and fire safety investigation of the World Trade Center disaster: Baseline structural performance and aircraft impact damage analysis of the world trade center towers.” NIST, Washington, DC.
Simiu, E., and Filliben, J. J. (2005). “Wind tunnel testing and the sector-by-sector approach to wind directionality effects.” J. Struct. Eng., 1143–1145.
Simiu, E., and Heckert, N. A. (1996). “Extreme wind distribution tails: A ‘peaks over threshold’ approach.” J. Struct. Eng., 539–547.
Simiu, E., Letchford, C., Isyumov, N., Chowdhury, A. G., and Yeo, D. (2012). “Assessment of ASCE 7-10 standard methods for determining wind loads.” J. Struct. Eng., 2044–2047.
Simiu, E., and Scanlan, R. H. (1996). Wind effects on structures: Fundamentals and application to design, Wiley, New York.
Smith, R. L. (1989). “Extreme value analysis of environmental time series: An application to trend detection in ground-level ozone.” Stat. Sci., 4(4), 367–377.
Wen, Y. (1983). “Wind direction and structural reliability.” J. Struct. Eng., 1028–1041.
Wen, Y. (1984). “Wind direction and structural reliability: II.” J. Struct. Eng., 1253–1264.
Xu, Z., Bekele, S., Mikitiuk, M., Isyumov, N., and Ho, E. (2008). “Bi-modal Weibull distribution fit for climatic wind speed histogram.” Proc., 13th Australasian Wind Engineering Society Workshop, Australasian Wind Engineering Society, 32–35.
Zhang, X., and Chen, X. (2015). “Assessing probabilistic wind load effects via a multivariate extreme wind speed model: A unified framework to consider directionality and uncertainty.” J. Wind Eng. Ind. Aerodyn., 147, 30–42.
Zhang, X., and Chen, X. (2016). “Influence of dependence of directional extreme wind speeds on wind load effects with various mean recurrence intervals.” J. Wind Eng. Ind. Aerodyn., 148, 45–56.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: May 29, 2015
Accepted: Jun 16, 2016
Published online: Jul 27, 2016
Discussion open until: Dec 27, 2016
Published in print: Jan 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.