Performance-Based Seismic Design of Shape Memory Alloy–Reinforced Concrete Bridge Piers. II: Methodology and Design Example
Publication: Journal of Structural Engineering
Volume 142, Issue 12
Abstract
Here, a performance-based seismic design method is presented for shape memory alloy (SMA)-reinforced concrete (RC) bridge piers. The proposed design method is developed based on the existing displacement-based procedure where the expected performance is quantified by linking material strains and deformations to damage states, as well as to the probable postearthquake functionality of a bridge. Based on the performance-based damage states developed in a companion paper, this study presents the sequential procedure for the performance-based design of SMA-RC bridge piers using a combination of residual and maximum drift.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The financial contributions of Natural Sciences and Engineering Research Council of Canada (NSERC) through Discovery Grant and Industrial Postgraduate Scholarship Program are gratefully acknowledged.
References
Auricchio, F., and Sacco, E. (1997). “Superelastic shape-memory-alloy beam model.” J. Intell. Mater. Syst. Struct., 8(6), 489–501.
Bentz, E. C., Vecchio, F. J., and Collins, M. P. (2006). “Simplified modified compression field theory for calculating shear strength of reinforced concrete elements.” ACI Struct. J., 103(4), 614–624.
Billah, A. H. M. M., and Alam, M. S. (2015). “Seismic fragility assessment of concrete bridge piers reinforced with superelastic shape memory alloy.” Earthquake Spectra, 31(3), 1515–1541.
Billah, A. H. M. M., and Alam, M. S. (2016). “Performance-based seismic design of shape memory alloy–reinforced concrete bridge piers. I: Development of performance-based damage states.” J. Struct. Eng., 04016140.
CSA (Canadian Standards Association). (2014). “CHBDC 2014, Canadian highway bridge design code.”, Rexdale, ON, Canada.
Dwairi, H. M., Kowalsky, M. J., and Nau, J. M. (2007). “Equivalent damping in support of direct displacement-based design.” J. Earthquake Eng., 11(4), 512–530.
Erochko, J., Christopoulos, C., Tremblay, R., and Choi, H. (2011). “Residual drift response of SMRFs and BRB frames in steel buildings designed according to ASCE 7-05.” J. Struct. Eng., 589–599.
FEMA (Federal Emergency Management Agency). (2005). “FEMA 440/ATC55, improvement of nonlinear static seismic analysis procedures.” Applied Technology Council (ATC-55 Project), Redwood City, CA.
Haque, A. B. M. R., and Alam, M. S. (2013). “Direct displacement based design of industrial rack clad buildings.” Earthquake Spectra, 29(4), 1311–1334.
Kowalsky, M. J., Priestley, M. J. N., and MacRae, G. A. (1995). “Displacement-based design of RC bridge columns in seismic regions.” Earthquake Eng. Struct. Dyn., 24(12), 1623–1643.
Mander, J. B., Priestley, M. J. N., and Park, R. (1988). “Theoretical stress–strain model for confined concrete.” J. Struct. Eng., 1804–1826.
Menegotto, M., and Pinto, P. E. (1973). “Method of analysis for cyclically loaded R.C. plane frames including changes in geometry and non-elastic behaviour of elements under combined normal force and bending.” Symp. on the Resistance and Ultimate Deformability of Structures Acted on by Well Defined Repeated Loads, International Association for Bridge and Structural Engineering, Zurich, Switzerland, 15–22.
Miranda, E., and Ruiz-García, J. (2002). “Evaluation of approximate methods to estimate maximum inelastic displacement demands.” Earthquake Eng. Struct. Dyn., 31(3), 539–560.
Priestley, M. J. N., Calvi, G. M., and Kowalski, M. J. (2007). Displacement-based seismic design of structures, IUSS press, Pavia.
SeismoStruct 6 [Computer software]. SeismoSoft, Pavia, Italy.
Vecchio, F. J., and Collins, M. P. (1986). “The modified compression-filed theory for reinforced concrete elements subjected to shear.” ACI Struct. J., 83(2), 219–231.
Wang, D. S., Ai, Q. H., Li, H. N., Si, B. J., and Sun, Z. G. (2008). “Displacement based seismic design of RC bridge piers: Method and experimental evaluation.” 14th World Conf. on Earthquake Engineering, Beijing, China.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Dec 16, 2014
Accepted: Jun 14, 2016
Published online: Jul 22, 2016
Published in print: Dec 1, 2016
Discussion open until: Dec 22, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.