Shear Behavior of Reinforced Concrete Beams without Transverse Reinforcement Based on Critical Shear Displacement
Publication: Journal of Structural Engineering
Volume 143, Issue 1
Abstract
This paper presents a new concept to evaluate the shear capacity of reinforced concrete beams without shear reinforcement having flexural shear failure. Based on experimental observations, it is proposed that the opening of the critical inclined crack can be considered as the lower bound for the shear capacity of a structural member. It is also proposed that the unstable opening of the critical inclined crack is triggered when the shear displacement in an existing flexural crack reaches a critical value . Thus the critical shear displacement is used as a failure criterion, and based on that a new shear evaluation method is proposed. The method shows agreeable accuracy when compared with test results in literature.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASCE-ACI Committee 445 on Shear and Torsion. (1998). “Recent approaches to shear design of structural concrete.” J. Struct. Eng., 1375–1417.
Baumann, T., and Rüsch, H. (1970). Versuche zum studien der verdübelungswirkung der biegezugbewehrung eines stahlbetonbalkens [Experimental study on dowel action in reinforced concrete beam], Deutscher Ausschuss für Stahlbeton (DAfStb), Ernst, Berlin (in German).
Bažant, Z. P., and Kazemi, M. T. (1991). “Size effect on diagonal shear failure of beams without stirrups.” ACI Struct. J., 88(3), 268–276.
Bažant, Z. P., and Kim, J.-K. (1984). “Size effect in shear failure of longitudinal reinforced beams.” ACI J., 81(5), 456–468.
Bažant, Z. P., and Wahab, A. B. (1980). “Stability of parallel cracks in solids reinforced by bars.” Int. J. Solids Struct., 16(2), 97–105.
Bentz, E. C., Vecchio, F. J., and Collins, M. P. (2006). “Simplified modified compression field theory for calculating shear strength of reinforced concrete elements.” ACI Struct. J., 103(4), 614–624.
Bhal, N. S. (1968). “Über den Einfluss der Balkenhöhe auf die Schubtragfähigkeit von einfeldrigen Stahlbetonbalken mit und ohne Schubbewehrung [On the influence of the beam height to the shear capacity of single-span reinforced concrete beams with and without shear reinforcement].” Ph.D. thesis, Universität Stuttgart, Stuttgart, Germany (in German).
Campana, S., Anastasi, A., Ruiz, M. F., and Muttoni, A. (2013). “Analysis of shear-transfer actions on one-way RC members based on measured cracking pattern and failure kinematics.” Mag. Concr. Res., 65(6), 386–404.
CEN (European Committee for Standardization). (2004). “Eurocode 2: design of concrete structures. Part 1-1: General rules and rules for buildings.” Eurocode 3, Brussels.
Chana, P. S. (1987). “Investigation of the mechanism of shear failure of reinforced concrete beams.” Mag. Concr. Res., 39(141), 196–204.
Collins, M. P. (1978). “Towards a rational theory for RC members in shear.” J. Struct. Div., 104(4), 649–666.
Collins, M. P., Bentz, E. C., and Sherwood, E. G. (2008). “Where is shear reinforcement required? Review of research results and design procedures.” ACI Struct. J., 105(5), 590–600.
Collins, M. P., and Kuchma, D. A. (1999). “How safe are our large, lightly reinforced concrete beams, slabs, and footings?” ACI Struct J., 96(4), 482–490.
Fenwick, R. C., and Paulay, T. (1968). “Mechanisms of shear resistance of concrete beams.” J. Struct. Div., 94(10), 2235–2350.
fib (International Federation for Structural Concrete). (2012). “fib model code for concrete structures 2010.”, Ernst & Sohn, Lausanne.
Hillerborg, A., Modéer, M., and Petersson, P.-E. (1976). “Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements.” Cem. Concr. Res., 6(6), 773–781.
Kani, G. N. J. (1967). “How safe are our large reinforced concrete beams.” ACI J., 64(3), 128–141.
Kim, W., and White, R. N. (1999). “Shear-critical cracking in slender reinforced concrete beams.” ACI Struct. J., 96(5), 757–765.
König, G., and Fischer, J. (1995). “Model uncertainties concerning design equations for the shear capacity of concrete members without shear reinforcement.” CEB Bullet., 224, 49–100.
Krips, M. (1985). “Rißbreitenbeschränkung im Stahlbeton und Spannbeton [Crack width in reinforced and prestressed concrete].” Mitteilungen aus dem Institut für Massivbau der TH Darmstadt, TH Darmstadt, Darmstadt, Germany, 84–85 (in German).
Leonhardt, F., and Walther, R. (1962). Schubversuche an einfeldrigen Stahlbetonbalken mit und ohne Schubbewehrung [Shear tests on single-span reinforced concrete beams with and without shear reinforcement], Vol. 151, Bulletin of Deutscher Ausschuss für Stahlbeton (DAfStb), Ernst, Berlin (in German).
Marí, A., Bairán, J., Cladera, A., Oller, E., and Ribas, C. (2015). “Shear-flexural strength mechanical model for the design and assessment of reinforced concrete beams.” Struct. Infrastruct. E., 11(11), 1399–1419.
Mörsch, E. (1909). Der Eisenbetonbau [Concrete-steel construction], Engineering News Publishing, New York.
Muttoni, A., and Ruiz, M. F. (2008). “Shear capacity of members without transverse reinforcement as function of critical shear crack width.” ACI Struct. J., 105(2), 163–172.
Park, H. G., Choi, K. K., and Wight, J. K. (2006). “Strain-based shear strength model for slender beams without web reinforcement.” ACI Struct J., 103(6), 783–793.
Regan, P. E. (1993). “Research on shear: A benefit to humanity or a waste of time?” Struct. Eng., 71(19), 337–347.
Reineck, K.-H. (1991). “Ultimate shear force of structural concrete members without transverse reinforcement derived from a mechanical model.” ACI Struct. J., 88(5), 592–602.
Reineck, K.-H., Bentz, E. C., Fitik, B., Kuchma, D. A., and Bayrak, O. (2013). “ACI-DAfStb databases of shear tests on slender reinforced concrete beams without stirrups.” ACI Struct. J., 110(5), 867–875.
Swiss Society of Engineers and Architects. (2003). “SIA Code 262 for Concrete Structures.” Zürich.
Taylor, H. P. J. (1971). “Fundamental behaviour in bending and shear of reinforced concrete.” Ph.D. thesis, London.
Tung, N. D., and Tue, N. V. (2015). “A new approach to shear design of slender reinforced concrete members without transverse reinforcement.” Eng. Struct., 107(1), 180–194.
Tureyen, A. K., and Frosch, R. J. (2003). “Concrete shear strength: Another perspective.” ACI Struct. J., 100(5), 609–615.
Vecchio, F. J., and Collins, M. P. (1986). “The modified compression-field theory for reinforced concrete elements subjected to shear.” ACI J., 83(2), 219–231.
Walraven, J. C. (1978). “The influence of depth on the shear strength of lightweight concrete beams without shear reinforcement.”, Delft Univ. of Technology, Delft, Netherlands.
Walraven, J. C. (1981). “Fundamental analysis of aggregate interlock.” J. Struct. Eng., 107(ST11), 2245–2270.
Walraven, J. C., and Lehwalter, N. (1989). “Die Tragfähigkeit von Betondruckstreben in Fachwerkmodellen am Beispiel von gedrungenen Balken [Bearing capacity of concrete compression struts in strut and tie models, considering the example of short compact beams].” Beton- und Stahlbetonbau, 84(4), 81–87 (in German).
Yang, Y. (2014). “Shear behaviour of reinforced concrete members without shear reinforcement—A new look at an old problem.” Ph.D. thesis, Delft Univ. of Technology, Delft, Netherlands.
Yang, Y., and den Uijl, J. A. (2011). “Report of experimental research on shear capacity of beams close to intermediate supports.”, Delft University of Technology, Delft, Netherlands.
Yang, Y., den Uijl, J. A., and Walraven, J. (2012). “Shear capacity of reinforced concrete beams under complex loading conditions.” Proc., 9th Fib Int. Ph.D. Symp., Karlsruhe Institute of Technology, Karlsruhe, Germany, 43–48.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Aug 22, 2015
Accepted: May 14, 2016
Published online: Jul 25, 2016
Discussion open until: Dec 25, 2016
Published in print: Jan 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.