Modeling of Steel-Concrete Composite Elements under In-Plane and Out-of-Plane Loads
Publication: Journal of Structural Engineering
Volume 142, Issue 10
Abstract
A nonlinear analysis procedure for steel-concrete (SC) composite structures is presented. The procedure uses smeared crack concrete constitutive modeling done on the basis of the disturbed stress field model and supplemental material models that are used to incorporate response contributions of the steel faceplates comprising SC composite elements. The procedure is implemented within the framework of a thick-shell finite-element analysis program and is verified using experimental data pertaining to SC composite structural elements subjected to exclusively in-plane or exclusively out-of-plane (i.e., through-thickness) loading conditions. Lastly, the shell structure analysis program is used to numerically investigate the performance of SC composite elements subjected to combined in-plane and out-of-plane shear forces, an area directly relevant to SC infrastructure applications, yet one that is limited in the existing database of literature.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The performance of this work was made possible through a research grant provided by the U.S. Nuclear Regulatory Commission (NRC) (Grant No. NRC-HQ-11-G-04-0083). The support provided by the NRC is gratefully acknowledged.
References
AASHTO. (2014). LRFD bridge design specifications, Washington, DC.
Adebar, P. E., and Collins, M. P. (1991). “Shear design of concrete offshore structures.” ACI Struct. J., 91(3), 324–335.
Bentz, E. C. (2005). “Explaining the riddle of tension stiffening models for shear panel experiments.” J. Struct. Eng., 1422–1425.
CEB-FIP (Comité Euro-International du Béton Fédération International de la Précontrainte). (1993). “Design of concrete structures.”, Thomas Telford, London.
Cook, R. D., Malkus, D. S., and Plesha, M. E. (1989). Concepts and applications of finite element analysis, Wiley, New York.
CSA (Canadian Standards Association). (2004). “Design of concrete structures.” CSA A23.3, Mississauga, ON, Canada.
Dhakal, R. P., and Maekawa, K. (2002a). “Modeling for postyield buckling of reinforcement.” J. Struct. Eng., 1139–1147.
Dhakal, R. P., and Maekawa, K. (2002b). “Reinforcement stability and fracture of cover concrete in reinforced concrete members.” J. Struct. Eng., 1253–1262.
Epackachi, S., Nguyen, N. H., Kurt, E. G., Whittaker, A. S., and Varma, A. H. (2014). “In-plane seismic behavior of rectangular steel-plate composite wall piers.” J. Struct. Eng., 04014176.
FIB (Fédération Internationale du Béton). (2012). “Model Code 2010, final draft, vol. 1. FIB.”, Lausanne, Switzerland.
Figueiras, J. A., and Owen, D. R. J. (1984). “Analysis of elasto-plastic and geometrically nonlinear anisotropic plates and shells.” Finite element software for plates and shells, E. Hinton and D. R. J. Owen, eds., Pineridge, Swansea, U.K., 403.
Hoshikuma, J., Kawashima, K., Nagaya, K., and Taylor, A. W. (1997). “Stress-strain model for confined reinforced concrete in bridge piers.” J. Struct. Eng., 624–633.
Hrynyk, T. D. (2013). “Behaviour and modelling of reinforced concrete slabs and shells under static and dynamic loads.” Ph.D. dissertation, Dept. of Civil Engineering, Univ. of Toronto, Toronto.
Hrynyk, T. D., and Vecchio, F. J. (2015a). “Capturing out-of-plane shear failures in the analysis of reinforced concrete shells.” J. Struct. Eng., 04015058.
Hrynyk, T. D., and Vecchio, F. J. (2015b). “The influence of lateral expansions on the response of steel-concrete composite structures.” 23rd Int. Conf. on Structural Mechanics in Reactor Technology (SMiRT-23), IASMiRT, Raleigh, NC.
Kupfer, H., Hilsdorf, H. K., and Rusch, H. (1969). “Behavior of concrete under biaxial stress.” ACI J., 87(2), 656–666.
Link, R. A., and Elwi, A. E. (1995). “Composite concrete-steel plate walls: Analysis and behavior.” J. Struct. Eng., 260–271.
Malushte, S. R., Booth, P. N., and Varma, A. H. (2009). “Design of modular composite walls subjected to thermal and mechanical loading.” Structures Congress 2009: Don’t Mess with Structural Engineers: Expanding Our Role, ASCE, RestonVA.
Mindlin, R. D. (1951). “Influence of rotary inertia and shear on flexural motions of isotropic, elastic plates.” J. Appl. Mech., 18(1), 31–38.
Ozaki, M., Akita, S., Osuga, H., Nakayama, T., and Adachi, N. (2004). “Study on steel plate reinforced concrete panels subjected to cyclic in-plane shear.” Nucl. Eng. Des., 228(1–3), 225–244.
Polak, M. A., and Vecchio, F. J. (1993). “Nonlinear analysis of reinforced concrete shells.” J. Struct. Eng., 3439–3462.
Richart, F. E., Brandtzaeg, A., and Brown, R. L. (1928). “A study of the failure of concrete under combined compressive stresses.”, Univ. of Illinois Engineering Experimental Station, Urbana, IL.
Sasaki, N., Akiyiama, H., Narikawa, M., Hara, K., Takeuchi, M., and Usami, S. (1995). “Study on a concrete filled steel structure for nuclear power plants—Part 3: Shear and bending loading tests on wall member.” 13th Int. Conf. on Structural Mechanics in Reactor Technology (SMiRT-13), IASMiRT, Raleigh, NC.
Seckin, M. (1981). “Hysteretic behaviour of cast-in-place exterior beam-column-slab subassemblies.” Ph.D. dissertation, Dept. of Civil Engineering, Univ. of Toronto, Toronto, 266.
Sener, K. C., and Varma, A. H. (2014). “Steel-plate composite walls: Experimental database and design for out-of-plane shear.” J. Constr. Steel Res., 100, 197–210.
Takeuchi, M., Narikawa, M., Matsuo, I., Hara, K., and Usami, S. (1998). “Study on a concrete filled structure for nuclear power plants.” Nucl. Eng. Des., 179(2), 209–223.
Tanaka, Y., Mochizuki, O., Hirono, T., and Kanou, K. (1998). “Evaluation of steel-concrete composite structures for multi-micro shield tunnel.” Proc., Int. Association for Bridge and Structural Engineering (IABSE) Colloquium: Tunnel Structures, Vol. 78, Transport Research Laboratory, Berkshire, U.K., 187–192.
Usami, S., Akiyama, H., Narikawa, M., Hara, K., Takeuchi, M., and Sasaki, N. (1995). “Study on a concrete filled steel structure for nuclear power plants—Part 2: Compressive tests on wall members.” 13th Int. Conf. on Structural Mechanics in Reactor Technology (SMiRT-13), IASMiRT, Raleigh, NC.
Varma, A. H., Sener, K. C., Zhang, K., Coogler, K., and Malushte, S. R. (2011). “Out-of-plane shear behavior of SC composite structures.” 21st Int. Conf. on Structural Mechanics in Reactor Technology (SMiRT-21), IASMiRT, Raleigh, NC.
Vecchio, F. J. (2000). “Disturbed stress field model for reinforced concrete: Formulation.” J. Struct. Eng., 1070–1077.
Vecchio, F. J., and Collins, M. P. (1986). “The modified compression field theory for reinforced concrete elements subjected to shear.” ACI J., 83(2), 219–321.
Vecchio, F. J., and McQuade, I. (2011). “Towards improved modelling of steel-concrete composite wall elements.” Nucl. Eng. Des., 241(8), 2629–2642.
Walraven, J. C., and Reinhardt, H. W. (1981). “Theory and experiments on the mechanical behaviour of cracks in plain and reinforced concrete subjected to shear loading.” Heron, 26(1), 1–68.
Wong, P., Vecchio, F. J., and Trommels, H. (2013). VecTor2 and formworks manual, 2nd Ed., Univ. of Toronto, Toronto, 347.
Zhang, K., Varma, A., Malushte, S. R., and Gallocher, S. (2014). “Effect of shear connectors on local buckling and composite action in steel concrete composite walls.” Nucl. Eng. Des., 269, 231–239.
Zhou, J., Mo, Y. L., Sun, X., and Lim, J. (2010). “Seismic performance of composite steel plate reinforced concrete shear wall.” Proc., Conf. on Earth and Space 2010: Engineering, Science, Construction, and Operations in Challenging Environments, ASCE, Reston, VA, 3002–3010.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Sep 24, 2015
Accepted: Mar 1, 2016
Published online: May 5, 2016
Published in print: Oct 1, 2016
Discussion open until: Oct 5, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.