Ultimate-Load Behavior of RC Structural Systems Designed according to Eurocodes
Publication: Journal of Structural Engineering
Volume 142, Issue 10
Abstract
Various circumstances influence the behavior of reinforced concrete (RC) structures, some of which may increase the risk of a brittle failure for the whole system caused by shear forces. This paper presents a wide probabilistic investigation on the ultimate load behavior of RC structural systems designed according to Eurocodes. A full probabilistic model is derived and different structural systems are studied through material and geometric nonlinear analysis via Monte Carlo simulations. The resistance model is consistent with a current Eurocode and considers different failure modes (axial, bending, and shear). Results show that the ultimate failure load of RC structural systems designed according to Eurocodes may vary depending on the combination of three factors: (1) structural configuration; (2) load distribution; and (3) number of stirrups.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank Professor Giuseppe Mancini at Politecnico di Torino, Italy, for his availability, courtesy, and valuable contribution to the subject.
References
ACI (American Concrete Institute). (1989). “Building code requirements for reinforced concrete and commentary.” ACI 318M-89/ACI 318RM-89, Detroit.
Ang, B. G., Priestley, M. J. N., and Paulay, T. (1989). “Seismic shear strength of circular reinforced concrete columns.” ACI Struct. J., 86(1), 45–59.
Bresler, B., and Scordelis, A. C. (1963). “Shear strength of reinforced concrete beams.” ACI J. Proc., 60(1), 51–74.
CEB/FIP (European Committee for Concrete/International Federation for Prestressing). (1978). Manual of buckling and instability, Construction Press, Lancaster, London, New York.
CEN (European Committee for Standardization). (1998). “Design of structures for earthquake resistance.” Eurocode 8, Brussels, Belgium.
CEN (European Committee for Standardization). (2004). “Design of concrete structures—Part 1-1.” Eurocode 2, Brussels, Belgium.
Cladera, A., and Marí, A. R. (2007). “Shear strength in the new Eurocode 2. A step forward?” Struct. Concr., 8(2), 57–66.
Corley, W. (1966). “Rotational capacity of reinforced concrete beams.” J. Struct. Div., 92(5), 121–146.
Ferretti, D., Iori, I., and Morini, M. (2002). La Stabilità delle strutture, McGraw-Hill, Milano, Italy (in Italian).
Gaede, K. (1958). “Knicken von stahlbetonstäben unter kurz- und langzeitbelastung.” Deutscher Ausschuss für Stahlbeton Heft 129, Wilhelm Ernst & Sohn, Berlin (in German).
Garcia, E. (2010). “A tutorial on correlation coefficients.” 〈http://www.miislita.com〉 (Jan. 8, 2011).
Haldar, A., and Mahadevan, S. (2000). Probability, reliability, and statistical method in engineering design, Wiley, New York.
Hamming, R. W. (1962). Numerical methods for scientists and engineers, McGraw-Hill, New York.
Hirata, F. P., De Andrade, R. G. M., and Della Bella, J. C. (2013). “Comparative analysis between predictions models in codes and test data for shear strength.” Ibracon Struct. Mater. J., 6(6), 875–887.
JCSS (Joint Committee on Structural Safety). (2000). “Probabilistic model code.”.
Kang, Y.-J., and Scordelis, A. C. (1980). “Nonlinear analysis of prestressed concrete frames.” J. Struct. Div., 106(2), 445–462.
Kim, J. K., and Lee, T. G. (1992). “Nonlinear analysis of reinforced concrete beams with softening.” Comput. Struct., 44(3), 567–573.
Kwak, H.-G., and Kim, S.-P. (2002). “Nonlinear analysis of RC beams based on moment-curvature relation.” Comput. Struct., 80(7–8), 615–628.
Loh, W. L. (1996). “On Latin hypercube sampling.” Ann. Stat., 24(5), 2058–2080.
MATLAB 2013b [Computer software]. MathWorks, Natick, MA.
Massicotte, B., Elwi, A. E., and MacGregor, J. G. (1990). “Tension-stiffening model for planar reinforced concrete members.” J. Struct. Eng., 3039–3058.
McGill, R., Tukey, J. W., and Larsen, W. A. (1978). “Variations of boxplots.” Am. Stat., 32(1), 12–16.
McKay, M. D., Conover, W. J., and Beckman, R. J. (1979). “A comparison of three methods for selecting values of input variables in the analysis of output from a computer code.” Technometrics, 21(2), 239–245.
Mergos, P. E., and Kappos, A. J. (2010). “Seismic damage analysis including inelastic shear-flexure interaction.” Bull. Earthquake Eng., 8(1), 27–46.
Nelson, L. S. (1989). “Evaluating overlapping confidence intervals.” J. Qual. Technol., 21(2), 140–141.
Olsson, A., Sandberg, G., and Dahlblom, O. (2003). “On Latin hypercube sampling for structural reliability analysis.” Struct. Saf., 25(1), 47–68.
Park, R., and Paulay, T. (1975). Reinforced concrete structures, Wiley, New York.
Priestley, M. J. N., Ravindra, V., and Yan, X. (1994). “Seismic shear strength of reinforced concrete columns.” J. Struct. Eng., 2310–2329.
Rasheed, H. A. S., and Dinno, K. S. (1994a). “An efficient nonlinear analysis of RC sections.” Comput. Struct., 53(3), 613–623.
Rasheed, H. A. S., and Dinno, K. S. (1994b). “An improved nonlinear analysis of reinforced concrete frames.” Comput. Struct., 53(3), 625–636.
Sangiorgio, F. (2015). “Safety format for non-linear analysis of RC structures subjected to multiple failure modes.” M.S. thesis, Structural Engineering and Bridges, KTH Royal Institute of Technology, Stockholm, Sweden.
Sangiorgio, F., Silfwerbrand, J., and Mancini, G. (2015). “Resistance and sub-resistances of RC beams subjected to multiple failure modes.” Int. J. Civ. Struct. Constr. Archit. Eng., 9(2), 162–170.
Sargin, M. (1971). “Stress-strain relationships for concrete and the analysis of structural concrete sections.” Univ. of Waterloo, Solid Mechanics Division, Waterloo, Canada, 23–46.
Schlune, H., Plos, M., and Gylltoft, K. (2011). “Safety formats for nonlinear analysis tested on concrete beams subjected to shear forces and bending moments.” Eng. Struct., 33(8), 2350–2356.
Scott, R. H., and Whittle, R. T. (2005). “Moment redistribution effects in beams.” Mag. Concr. Res., 57(1), 9–20.
Scotta, R., Vitaliani, R., Saetta, A., Oñate, E., and Hanganu, A. (2001). “A scalar damage model with a shear retention factor for the analysis of reinforced concrete structures: Theory and validation.” Comput. Struct., 79(7), 737–755.
Snedecor, G. W., and Cochran, W. G. (1967). Statistical methods, 6th Ed., Iowa State University Press, Ames, IA.
Sykora, M., Holicky, M., and Krejsa, J. (2013). “Model uncertainty for shear resistance of reinforced concrete beams with shear reinforcement according to EN 1992-1-1.” Trans. VSB–Tech. Univ. Ostrava, Civ. Eng. Ser., 13(2), 150–159.
Tan, K.-H., and Chee-Khoon, N. G. (1998). “Effect of shear in externally prestressed beams.” ACI Struct. J., 95(2), 116–128.
Valipour, H. R., and Foster, S. J. (2010). “A total secant flexibility-based formulation for frame elements with physical and geometrical nonlinearities.” Finite Elem. Anal. Des., 46(3), 288–297.
Velleman, P. F., and Hoaglin, D. C. (1981). Applications, basics, and computing of exploratory data analysis, Duxbury Press, Pacific Grove, CA.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Jun 24, 2015
Accepted: Jan 27, 2016
Published online: Apr 19, 2016
Discussion open until: Sep 19, 2016
Published in print: Oct 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.