Shear Deformation and Sliding-Based Fiber Beam-Column Model for Seismic Analysis of Reinforced Concrete Coupling Beams
Publication: Journal of Structural Engineering
Volume 142, Issue 7
Abstract
Conventional RC coupling beams have been widely used as key energy-dissipation components in frame-core tube structural systems for high-rise buildings. A model with sufficient efficiency, accuracy, and practicality is urgently needed for the seismic analysis of high-rise structures. According to test results, both the shear deformation and shear sliding mechanisms are critical to assessing the seismic performance of coupling beams. However, available shear models for beams and columns cannot give satisfactory results in modeling both mechanisms in finite-element analysis (FEA). To address this problem, this study takes into account the section shear force–shear strain and shear sliding laws in the traditional displacement-based fiber beam-column element, which is implemented into a general FEA package. A new section shear force–shear strain law, which can consider the pinching effect, strength and stiffness deterioration, shear capacity degradation, and arbitrary complex loading path is first proposed. In addition, a new section shear force–shear sliding strain law is developed to model the special shear sliding phenomenon. Then, shear sliding and shear compression limit formulas are given to determine different failure modes. Two beam-column elements, named the shear element and sliding element, are finally developed and combined to model the coupling beam. To verify the proposed model, 47 test specimens are collected and summarized. The formulas for the shear strength, cracked shear stiffness, and shear displacement limit are proposed and verified. Then, the model is applied to 16 test specimens. It is indicated that the model has sufficient accuracy, high efficiency, and convenient modeling procedure, which offers a reliable and powerful tool for seismic analysis of conventional RC coupling beams and high-rise structures.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the financial support provided by the Twelfth Five-Year Plan major projects supported by National Science and Technology (Grant No. 2011BAJ09B01), and the National Science Fund of China (Grant No. 51378291).
References
ACI (American Concrete Institute). (2002). “Building code requirements for structural concrete.” ACI Committee 318, Farmington Hills, MI.
ASCE-ACI Task Committee 426. (1973). “Shear strength of reinforced concrete members.” J. Struct. Div., 99(6), 1091–1187.
ATC (Applied Technology Council). (1999). “Evaluation of earthquake damaged concrete and masonry wall buildings—Basic procedures manual.”, Washington, DC.
Breña, S. F., and Ihtiyar, O. (2011). “Performance of conventionally reinforced coupling beams subjected to cyclic loading.” J. Struct. Eng., 665–676.
Cai, M., Gu, X. L., Hua, J. J., and Lin, F. (2011). “Seismic response analysis of reinforced concrete columns considering shear effects.” J. Build. Strut., 32(11), 97–108 (in Chinese).
Eom, T. S., Park, H. G., and Kang, S. M. (2009). “Energy-based cyclic force-displacement relationship for reinforced concrete short coupling beams.” Eng. Struct., 31(9), 2020–2031.
Galano, L., and Vignoli, A. (2000). “Seismic behavior of short coupling beams with different reinforcement layouts.” ACI Struct. J., 97(6), 876–885.
Gong, B. N., and Fang, E. H. (1988a). “Behavior of reinforced concrete coupling beams between shear walls under cyclic loading.” J. Build. Struct., 9(1), 34–41 (in Chinese).
Gong, B. N., and Fang, E. H. (1988b). “Experimental investigation and full-range analysis of reinforced concrete coupling beams between shear walls.” Build. Sci., 4(4), 39–43 (in Chinese).
Gong, B. N., and Shahrooz, B. M. (2001). “Concrete-steel composite coupling beams. I: Component testing.” J. Struct. Eng., 625–631.
Huang, Z. H., Lu, X. L., and Zhou, Y. (2009). “Deformation capacity and performance-based seismic design for reinforced concrete coupling beams.” Struct. Eng., 25(5), 13–18 (in Chinese).
Ihtiyar, O. (2006). “Force-deformation response of conventionally reinforced coupling beams.” M.S. thesis, Univ. of Massachusetts, Amherst, MA.
Kwan, A. K. H., and Zhao, Z. Z. (2002). “Cyclic behaviour of deep reinforced concrete coupling beams.” Proc. ICE Struct. Build., 152(3), 283–293.
Lu, X., Lu, X., Guan, H. and Ye, L. (2013). “Collapse simulation of reinforced concrete high-rise building induced by extreme earthquakes.” Earthquake Eng. Struct. Dyn., 42(5), 705–723.
Marini, A., and Spacone, E. (2006). “Analysis of reinforced concrete elements including shear effects.” ACI Struct. J., 103(5), 645–655.
MSC. Marc Version 2007r1 [Computer software]. MSC Software, Santa Ana, CA.
Nie, J. G., Hu, H. S., and Eatherton, M. R. (2014). “Concrete filled steel plate composite coupling beams: Experimental study.” J. Constr. Steel Res., 94(1), 49–63.
Park, W. D., and Yun, H. D. (2005). “Seismic behaviour of coupling beams in a hybrid coupled shear walls.” J. Constr. Steel Res., 61(11), 1492–1524.
Paulay, T. (1971). “Coupling beams of reinforced concrete shear walls.” ASCE J. Struct. Div., 97(3), 843–862.
Paulay, T., and Binney, J. R. (1974). “Diagonally reinforced coupling beams of shear walls.” ACI Spec. Publ., 42, 579–598.
Petrangeli, M., Pinto, P. E., and Ciampi, V. (1999). “Fiber element for cyclic bending and shear of RC structures. I: Theory.” J Eng. Mech., 994–1001.
Pi, T. X. (2008). “Experimental study on seismic behavior and design method study of small span-to-depth ratio coupling beams of seismic RC shear walls.” Ph.D. thesis, Chongqing Univ., Chongqing, China.
Priestley, M. J. N., Verma, R., and Xiao, Y. (1994). “Seismic shear strength of reinforced concrete columns.” J. Struct. Eng., 2310–2329.
Qian, J. R., and Xu, F. J. (2006). “Displacement-based deformation capacity design method of reinforced concrete coupling beams.” Build. Struct., 36(1), 63–65 (in Chinese).
Sezen, H., and Chowdhury, T. (2009). “Hysteretic model for reinforced concrete columns including the effect of shear and axial load failure.” J Struct. Eng., 139–146.
Sezen, H., and Moehle, J. P. (2004). “Shear strength model for lightly reinforced concrete columns.” J. Struct. Eng., 1692–1703.
Shiu, K. N., Barney, G. B., Fiorato, A. E., and Corley, W. G. (1978). “Reversing load tests of reinforced concrete coupling beams.” Proc., Central American Conf. on Earthquake Engineering, Central America.
Su, R. K. L., Lam, W. Y., and Pam, H. J. (2009). “Experimental study of plate-reinforced composite deep coupling beams.” Struct. Des. Tall Spec. Build., 18(3), 235–257.
Tao, M. X., and Nie, J. G. (2013). “Fiber beam-column model considering slab spatial composite effect for nonlinear analysis of composite frame systems.” J. Struct. Eng., 04013039.
Tao, M. X., and Nie, J. G. (2015). “Element mesh, section discretization and material hysteretic laws for fiber beam-column elements of composite structural members.” Mater. Struct., 48(8), 2521–2544.
Tassios, T. P., Moretti, M., and Bezas, A. (1996). “On the behavior and ductility of reinforced concrete coupling beams of shear walls.” ACI Struct. J., 93(6), 711–720.
Xu, S. Y., and Zhang, J. (2011). “Hysteretic shear-flexure interaction model of reinforced concrete columns for seismic response assessment of bridges.” Earthquake Eng. Struct. Dyn., 40(3), 315–337.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Dec 15, 2014
Accepted: Nov 24, 2015
Published online: Feb 9, 2016
Published in print: Jul 1, 2016
Discussion open until: Jul 9, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.