Deformed Shape Wind Analysis of Tensile Membrane Structures
Publication: Journal of Structural Engineering
Volume 142, Issue 3
Abstract
Conventionally, the pressure coefficients of tensile membrane structures are determined in wind tunnels on rigid models and the effect of the typically large deformations of the membranes on the pressure coefficients is not taken into account. The aim of the current research is to analyze the effect of the displacements of membrane structures on the pressure coefficients. A more precise wind analysis is introduced in this paper. Two rigid models were analyzed in a wind tunnel: the model of the unloaded construction shape, and the model of the deformed shape of the membrane under wind loads. The deformed shape was determined with the dynamic relaxation method on the basis of the pressure coefficients obtained from the construction shape subjected to wind loads. The two pressure coefficient fields, the corresponding membrane stresses and displacements are introduced and compared in this paper. Results show that the displacements of the membrane under wind load can result in significant differences of the pressure coefficients maximum values. Conversely, the introduced analysis and the determination of the pressure coefficients of the deformed shape improve the accuracy of the wind analysis of tensile membrane structures.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This paper was supported by the János Bolyai Research Scholarship of the Hungarian Academy of Sciences. Part of the research was supported by the Hungarian-Mexican Intergovernmental S & T Programme (NKTH) No. MX-7/2007.
References
Barnes, M. R. (1988). “Form-finding and analysis of prestressed nets and membranes.” Comput. Struct., 30(3), 685–695.
Berger, H. (2005). Light structures—Structures of light, AuthorHouse, Bloomington, IN.
CEN (European Committee for Standarisation). (2005). “Eurocode 1: Actions on structures—General actions—Part 1–4: Wind actions.” EN 1991-1-4:2005, Brussels, Belgium.
Day, A. S. (1965). “An introduction to dynamic relaxation.” Engineer, 219, 218–221.
Forster, B., and Mollaert, M. (2004). European design guide for tensile surface structures, TensiNet, Brussels, Belgium.
Hegyi, D., Sajtos, I., Geiszter, G. Y., and Hincz, K. (2006). “Eight-node quadrilateral double-curved surface element for membrane analysis.” Comput. Struct., 84(31–32), 2151–2158.
Hincz, K. (2000). “Determination of the cutting patterns of prestressed tent structures.” Revista Portuguesa de Engenharia de Estruturas, 47, 45–49.
Hincz, K., and Gamboa-Marrufo, M. (2010). “Wind analysis of an arch supported tensile roof.” Proc., Int. Association for Shell and Spatial Structures (IASS) Symp., China Architecture and Building Press, Beijing, 13.
Huntington, C. G., ed. (2013). Tensile fabric structures: Design, analysis and construction, ASCE, Reston, VA.
Nagai, Y., Okada, A., Miyasato, N., and Saitoh, M. (2011). “Wind tunnel tests on the horn-shaped membrane roof.” J. C. Lerner, ed., Wind tunnels and experimental fluid dynamics research, InTech, Rijeka, Croatia, 325–348.
Seidel, M. (2009). Tensile surface structures: A practical guide to cable and membrane construction, Ernst and Sohn, Berlin.
Topping, B. H. V., and Iványi, P. (2007). Computer aided design of cable membrane structures, Saxe-Coburg Publications, Kippen, Stirlingshire, Scotland.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Mar 30, 2015
Accepted: Sep 12, 2015
Published online: Oct 26, 2015
Published in print: Mar 1, 2016
Discussion open until: Mar 26, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.