Application of a Translational Tuned Mass Damper Designed by Means of Genetic Algorithms on a Multistory Cross-Laminated Timber Building
Publication: Journal of Structural Engineering
Volume 142, Issue 4
Abstract
This paper presents a numerical study conducted on a seven-story timber building made of cross-laminated (X-lam) panels, equipped with a linear translational tuned mass damper (TMD). The TMD is placed on the top of the building as a technique for reducing the notoriously high drifts and seismic accelerations of these types of structures. TMD parameters (mass, stiffness, and damping) were designed using a genetic algorithm (GA) technique by optimizing the structural response under seven recorded earthquake ground motions compatible, on average, with a predefined elastic spectrum. Time-history dynamic analyses were carried out on a simplified two-degree-of-freedom system equivalent to the multistory building, while a detailed model of the entire building using two-dimensional elastic shell elements and elastic springs for modeling connections was used as a verification of the evaluated solution. Several comparisons between the response of the structure with and without TMD subjected to medium- and high-intensity recorded earthquake ground motions are presented, and the effectiveness and limits of these devices for improving the seismic performance of X-lam buildings are critically evaluated.
Get full access to this article
View all available purchase options and get full access to this article.
References
Arfiadi, Y., and Hadi, M. (2011). “Optimum placement and properties of tuned mass dampers using hybrid genetic algorithms.” Int. J. Optim. Civ. Eng., 1(1), 167–187.
Beyer, H. G. (2001). The theory of evolution strategies, Springer, Berlin, 2001.
Blass, H. J., and Fellmoser, P. (2004). “Design of solid wood panels with cross layers.” Proc., 8th World Conf. on Timber Engineering, WCTE 2004, Lahti, Finland, 543–548.
Carrato, P., and Santamont, K. (2012). “Tuned mass damper control of cross-wind excitation of a solar tower.” Proc., Structures Congress, Chicago, 1463–1472.
Ceccotti, A., Sandhaas, C., Okabe, M., Yasumura, M., Minowa, C., and Kawai, N. (2013). “SOFIE project—3D shaking table test on a seven-storey full-scale cross-laminated timber building.” Earthquake Eng. Struct. Dyn., 42(13), 2003–2021.
CEN (European Committee for Standardization). (2004). “Eurocode 8. Design of structures for earthquake resistance—Part 1: General rules, seismic actions and rules for buildings.” EN 1998–1, Brussels.
Chen, Y., and Lam, F. (2013). “Bending performance of box-based cross-laminated timber systems.” J. Struct. Eng., 04013006.
CNR-IVALSA Trees and Timber Institute. (2008). “Progetto SOFIE—New architecture with wood.” 〈http://www.progettosofie.it/〉.
Connor, J. J. (2003). Introduction to structural motion control, Prentice Hall, New York.
Den Hartog, J. P. (1956). Mechanical vibrations, Mc-Graw Hill, New York.
Eshelman, L. J., and Schaffer, J. D. (1993). “Real-coded genetic algorithms and interval-schemata.” Foundations of genetic algorithms 2, Morgan Kaufman, San Mateo, CA, 187–202.
European Norm. (2006). “Timber structures—Test methods—Cyclic testing of joints made with mechanical fasteners.” EN 12512, UNI, Ente Italiano di Normazione.
Fragiacomo, M., Dujic, B., and Sustersic, I. (2011). “Elastic and ductile design of multi-storey crosslam massive wooden buildings under seismic actions.” Eng. Struct., 33(11):3043–3053.
Fragiacomo, M., Menis, A., Clemente, I., Bochicchio, G., and Ceccotti, A. (2013). “Fire resistance of cross-laminated timber panels loaded out of plane.” J. Struct. Eng., 04013018.
Gavric, I., Fragiacomo, M., and Ceccotti, A. (2012). “Strength and deformation characteristics of typical X-lam connections.” Proc., World Conf. on Timber Engineering (WCTE 2012), Vol. 2, Auckland, New Zealand, 146–155.
Gavric, I., Fragiacomo, M., and Ceccotti, A. (2014). “Cyclic behaviour of typical metal connectors for cross-laminates (CLT) structures.” RILEM Mater. Struct., 48(6), 1841–1857.
Goldberg, D. E. (1989). Genetic algorithms in search, optimization and machine learning, Addison-Wesley Longman Publishing, Boston.
Kareem, A., Kijewski, T., and Tamura, Y. (1999). “Mitigation of motion of tall buildings with specific examples of recent applications.” Wind Struct., 2(3), 201–251.
Kashani, R., Pearce, A., and Markham, B. (2014). “Tuned damping of balcony vibration.” J. Perform. Constr. Facil., 450–457.
Kirkpatrick, S., Gelatt, C. D., and Vecchi, M. P. (1983). “Optimization by simulated annealing.” Science, 220(4598), 671–680.
Lucchini, A., Greco, R., Marano, G., and Monti, G. (2014). “Robust design of tuned mass damper systems for seismic protection of multistory buildings.” J. Struct. Eng., A4014009.
Okabe, M., et al. (2010). “Comparison with measuring method of internal storey drift on shaking table test of 7-storey X-lam building.” Proc., 11th WCTE World Conf. on Timber Engineering, Vol. 2, Publistampa, Pergine, TN, 299–300.
Pei, S., van de Lindt, J., and Popovski, M. (2013). “Approximate R-factor for cross-laminated timber walls in multistory buildings.” J. Archit. Eng., 245–255.
Randall, S. E., Halsted, D. M., Taylor, D. L. (1981). “Optimum vibration absorbers for linear damped systems.” J. Mech. Des., 103(4), 908–913.
Rinaldin, G., Amadio, C., and Fragiacomo, M. (2013). “A component approach for the hysteretic behaviour of connections in cross-laminated wooden structures.” Earthquake Eng. Struct. Dyn., 42(13), 2023–2042.
Schickhofer, G., Bogensperger, T., and Moosbrugger, T. (2010). “BSPhandbuch: Holz-Massivbauweise in Brettsperrholz—Nachweise auf Basis des neuen europäischen Normenkonzepts.” Verlag der Technischen Universität Graz (in German).
Setareh, M., Ritchey, J., Murray, T., Koo, J., and Ahmadian, M. (2007). “Semiactive tuned mass damper for floor vibration control.” J. Struct. Eng., 242–250.
Simulia. (2012). 〈http://www.3ds.com/products/simulia/overview/〉.
Smerzini, C., Galasso, C., Iervolino, I., and Paolucci, R. (2013). “Ground motion record selection based on broadband spectral compatibility.” Earthquake Spectra, 30(4), 1427–1448.
Warburton, G. B. (1982). “Optimal absorber parameters for various combinations of response and excitation parameters.” Earthquake Eng. Struct. Dyn., 10(3), 381–401.
Warburton, G. B., and Ayorinde, E. O. (1980). “Optimum absorber parameters for simple systems.” Earthquake Eng. Struct. Dyn., 8(3), 197–217.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Jul 6, 2014
Accepted: Apr 28, 2015
Published online: Jul 3, 2015
Discussion open until: Dec 3, 2015
Published in print: Apr 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.