Experimental Studies on Cyclic Performance of Column Base Strong Axis–Aligned Asymmetric Friction Connections
Publication: Journal of Structural Engineering
Volume 142, Issue 1
Abstract
This paper describes experimental testing of an asymmetric friction connection (AFC) at the base of a steel column such as may be used in a moment-frame. Friction/sliding surfaces were parallel to the column-strong axis. In-plane, out-of-plane and 2D clover leaf–cyclic tests were conducted of columns both with and without applied axial force. Tests were conducted both with and without bolts passing through the plates to provide compression on the sliding/friction interface. It was found that this type of rocking base–friction connection can tolerate high levels of drift without significant strength degradation, although some stiffness degradation occurred, especially after the cycles in the weak-axis direction. A simple procedure proposed to estimate the moment resistance is verified. The friction-base connections, having similar cost to conventional connections and exhibiting low-damage performance, have the potential to become widely used in aseismic construction.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to acknowledge the Ministry of Business, Innovation and Employment (MBIE) Natural Hazards Research Platform (NHRP) for its support of this study as part of the Composite Solutions project. All opinions expressed remain those of the authors.
References
ACI (American Concrete Institute). (2001). “Acceptance criteria for moment frames based on sructural testing.”.
Chanchí, J. C., Macrae, G. A., Chase, J. G., Rodgers, G. W., and Clifton, C. G. (2012). “Behaviour of asymmetrical friction connections using different shim materials.” New Zealand Society for Earthquake Engineering Conf., The New Zealand Society for Earthquake Engineering, Wellington, New Zealand.
Chanchí, J. C., Xie, R., Macrae, G., Chase, G., Rodgers, G., and Clifton, C. (2014). “Low-damage braces using asymmetrical friction connections (AFC).” NZSEE Conf., The New Zealand Society for Earthquake Engineering, Wellington, New Zealand.
Clifton, C. G. (2005). “Semi-rigid joints for moment resisting steel framed seismic-resisting systems.” Ph.D. thesis, Univ. of Auckland, Auckland, New Zealand.
Gledhill, S., Sidwell, G., and Bell, D. K. (2008). “The damage avoidance design of tall steel frame buildings.” NZSEE Conf., The New Zealand Society for Earthquake Engineering, Wellington, New Zealand.
Latham, D., Reay, A., and Pampanin, S. (2013). “Kilmore street medical centre: Application of a post-tensioned steel rocking system.” Proc., Steel Innovations Conf., Steel Construction New Zealand, Manukau, New Zealand.
Leslie, B., Gledhill, S., and Moghaddassi, M. (2013). “Concentric braced frames with AFC connections—A designers view.” SCNZ, Steel Innovation Conf., Steel Construction New Zealand, Manukau, New Zealand.
Macrae, G. A., Clifton, G. C., Mackinven, H., Mago, N., Butterworth, J., and Pampanin, S. (2010). “The sliding hinge joint moment connection.” NZSEE Bull., 43(3), 202–212.
Macrae, G. A., Urmson, C. R., Walpole, W. R., Moss, P., Hyde, K., and Clifton, C. (2009). “Axial shortening of steel columns in buildings subjected to earthquakes.” NZSEE Bull., 42(4), 275–287.
NZS3404, (2007). “Steel structures standard: Part 1.” New Zealand.
Rodgers, G., Solberg, K., Mander, J., Chase, J., Bradley, B., and Dhakal, R. (2012). “High-force-to-volume seismic dissipators embedded in a jointed precast concrete frame.” J. Struct. Eng., 375–386.
Rodgers, G. W., Chase, J. G., Mander, J. B., Leach, N. C., and Denmead, C. S. (2007). “Experimental development, tradeoff analysis and design implementation of high force-to-volume damping technology.” NZSEE Bull., 40(2), 35–48.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Oct 28, 2014
Accepted: Mar 23, 2015
Published online: Jun 9, 2015
Discussion open until: Nov 9, 2015
Published in print: Jan 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.