Effect of Concrete Strength and Stud Collar Size to Shear Capacity of Demountable Shear Connectors
Publication: Journal of Structural Engineering
Volume 141, Issue 11
Abstract
In this paper, a group of demountable shear connectors have been developed and tested to assess their potential and suitability in terms of replacing welded shear studs. The experiments showed that these demountable shear connectors can be easily demounted after testing and have similar capacity and behavior to those of welded shear connectors. After the numerical simulation method had been validated against experimental observation, a parametric study was carried out to understand the effect of concrete grades and stud collar sizes on the shear resistance of demountable shear connections. Simple design calculation methods for welded shear connections or anchoring connections provided in European and American standards were checked to the suitability for assessment of this headed demountable shear connector.
Get full access to this article
View all available purchase options and get full access to this article.
References
ABAQUS version 6.12 [Computer software]. Hibbitt, Karlsson and Sorensen.
ACI (American Concrete Institute). (2008). “Building code requirements for structural concrete.”, Farmington Hills, MI.
AISC (American Institute of Steel Construction). (2010). “Specification for structural steel buildings.”, Chicago.
British Standards Institution. (2004a). “Design of composite steel and concrete structures: Part 1.1—General rules and rules for buildings.” Eurocode 4, EN1994-1-1, London.
British Standards Institution. (2004b). “Design of concrete structures: Part 1.1—General rules and rules for buildings.” Eurocode 2, EN1992-1-1, London.
British Standards Institution. (2004c). “UK national annex to Eurocode 4: Design of composite steel and concrete structures—Part 1-1: General rules and rules for buildings.” NA to BS EN 1994-1-1, London.
Dallam, L. N. (1968). “High strength bolt shear connectors—Pushout tests.” ACI J., 65(9), 767–769.
Kwon, G., Engelhardt, M. D., and Klingner, R. E. (2010). “Behavior of post-installed shear connectors under static and fatigue loading.” J. Constr. Steel Res., 66(4), 532–541.
Marshall, W. T., Nelson, H. M., and Banerjee, H. K. (1971). “An experimental study of the use of high strength friction grip bolts as shear connectors in composite beams.” Struct. Eng., 49(4), 171–178.
Marza, O., Uy, B., and Patel, N. (2010). “Behavior and strength of shear connectors ultilising blind bolting.” 4th Int. Conf. on Steel and Composite Structures, B. Uy, Z. Tao, F. Mashiri, X. Zhu, O. Mirza, and E. L. Tan, eds., Research Publishing Services, Singapore, 791–796.
Menzies, J. B. (1971). “CP 117 and shear connectors in steel-concrete composite beams made with normal-density or lightweight concrete.” Struct. Eng., 49(3), 137–153.
Mottram, J. T., and Johnson, R. P. (1990). “Push tests on studs welded through profile steel sheeting.” Struct. Eng., 68(10), 187–193.
Moynihan, M. C., and Allwood, J. M. (2014). “Viability and performance of demountable composite connectors.” J. Constr. Steel Res., 99, 47–56.
Pavlović, M., Marković, Z., Veljković, M., and Buđevac, D. (2013). “Bolted shear connectors versus headed studs behaviour in push-out tests.” J. Constr. Steel Res., 88, 134–149.
Qureshi, J., Lam, D., and Ye, J. (2011a). “Effect of shear connector spacing and layout on the shear connector capacity in composite beams.” J. Constr. Steel Res., 67(4), 706–719.
Qureshi, J., Lam, D., and Ye, J. (2011b). “The influence of profiled sheeting thickness and shear connector’s position on strength and ductility of headed shear connector.” Eng. Struct., 33(5), 1643–1656.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: May 14, 2014
Accepted: Jan 6, 2015
Published online: Feb 17, 2015
Discussion open until: Jul 17, 2015
Published in print: Nov 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.