Unified Softened Membrane Model for Torsion in Hollow and Solid Reinforced Concrete Members: Modeling Precracking and Postcracking Behavior
Publication: Journal of Structural Engineering
Volume 141, Issue 10
Abstract
The softened membrane model for torsion (SMMT) was the first rational theory to incorporate the precracking and postcracking torsional behavior of solid RC members. A series of theoretical and experimental investigations were conducted in Taiwan to extend the SMMT to hollow RC members. This paper proposes a generalized SMMT based on the results of these investigations, determines the constitutive relationships of concrete for thin- and thick-walled hollow RC members, and develops a unified SMMT theory for hollow and solid RC members. The proposed SMMT for hollow RC members (SMMT-H) is also employed to derive a rational and formula for such members, completing a unified set of noniterative rational formulas for both hollow and solid RC members. In the experiment, the proposed SMMT-H analyzed the torsional responses of the specimens reasonably well, and predicted the cracking points and precracking torque-twist curves almost perfectly. The proposed rational formula for hollow RC members, which accurately predicted the and of the specimens, is an almost-perfect simplification of the SMMT-H in terms of and . A numerical example illustrating the simple application of this formula is presented.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was funded by the National Science Council, Taiwan, through Grants NSC100-2221-E-260-022 and NSC101-2221-E-260-019. The author gratefully acknowledges the assistance of Y.-T. Chen, H.-H. Chang, Y.-L. Lai, J.-C. Lin and Y.-R. Cai, former graduate students at National Chi Nan University and National Kaohsiung University of Applied Sciences, Taiwan.
References
ACI-ASCE Committee 445. (2013). “Report on torsion in structural concrete (ACI 445.1 R-12).” American Concrete Institute, Farmington Hills, MI.
ACI Committee 318. (2011). “Building code requirements for structural concrete (ACI 318-11) and commentary.” American Concrete Institute, Farmington Hills, MI.
Ashour, S. A., Samman, T. A., and Radain, T. A. (1999). “Torsional behavior of reinforced high-strength concrete deep beams.” ACI Struct. J., 96(6), 1049–1060.
Belarbi, A., and Hsu, T. T. C. (1994). “Constitutive laws of concrete in tension and reinforcing bars stiffened by concrete.” ACI Struct. J., 91(4), 465–474.
Bernardo, L. F. A., and Lopes, S. M. R. (2009). “Torsion in high-strength concrete hollow beams: Strength and ductility analysis.” ACI Struct. J., 106(1), 39–48.
Bernardo, L. F. A., and Lopes, S. M. R. (2011). “Theoretical behavior of HSC sections under torsion.” Eng. Struct., 33(12), 3702–3714.
Chalioris, C. E. (2006). “Experimental study of the torsion of reinforced concrete members.” Struct. Eng. Mech., 23(6), 713–737.
Chen, G.-H. (2012). “A preliminary modification of the softened membrane model for torsion in prestressed concrete members.” Master’s thesis, National Chi Nan Univ., Nantou, Taiwan (in Chinese).
Chiu, H.-J., Fang, I.-K., Young, W.-T., and Shiau, J.-K. (2007). “Behavior of reinforced concrete beams with minimum torsional reinforcement.” Eng. Struct., 29(9), 2193–2205.
Chu, S.-C. (2002). “The behavior of reinforced concrete beam subjected to combined torsion and shear.” Master’s thesis, Dept. of Civil Engineering, National Cheng Kung Univ., Tainan, Taiwan (in Chinese).
Collins, M. P. (1973). “Torque-twist characteristics of reinforced concrete beams.”, University of Waterloo Press, Waterloo, ON, Canada, 211–231.
Fu, C. C., and Tang, Y. (2001). “Torsional analysis for prestreesed concrete multiple cell box.” J. Eng. Mech., 45–51.
Hsu, T. T. C. (1968). “Torsion of structural concrete - behavior of reinforced concrete rectangular members.”, American Concrete Institute, Detroit, MI, 261–306.
Hsu, T. T. C. (1990). “Shear flow zone in torsion of reinforced concrete.” J. Struct. Eng., 3206–3226.
Hsu, T. T. C., and Mo, Y. L. (1985a). “Softening of concrete in torsional members—Prestressed concrete.” ACI J. Proc., 82(5), 603–615.
Hsu, T. T. C., and Mo, Y. L. (1985b). “Softening of concrete in torsional members—Theory and tests.” ACI J. Proc., 82(3), 290–303.
Hsu, T. T. C., and Mo, Y. L. (2010). Unified theory of concrete structures, Wiley, West Sussex, U.K.
Hsu, T. T. C., and Zhu, R. R. H. (2002). “Softened membrane model for reinforced concrete elements in shear.” ACI Struct. J., 99(4), 460–469.
Jeng, C.-H. (2010). “Simple rational formulas for cracking torque and twist of reinforced concrete members.” ACI Struct. J., 107(2), 189–198.
Jeng, C.-H. (2012). “Softened membrane model for torsion in reinforced concrete members.” Advances in engineering research, Vol. 2, Nova Science, Hauppauge, NY, 251–338.
Jeng, C.-H., Chiu, H.-J., and Chen, C.-S. (2010). “Modeling the initial stresses in prestressed concrete members under torsion.” The Structures Congress 2010, ASCE, Reston, VA, 1773–1781.
Jeng, C.-H., Chiu, H.-J., and Peng, S.-F. (2013). “Design formulas for cracking torque and twist in hollow reinforced concrete members.” ACI Struct. J., 110(3), 457–468.
Jeng, C.-H., and Hsu, T. T. C. (2009). “A softened membrane model for torsion in reinforced concrete members.” Eng. Struct., 31(9), 1944–1954.
Jeng, C.-H., Peng, S.-F., and Chao, M. (2014a). “Constitutive relationships of concrete for hollow reinforced concrete members in pure torsion.” Mag. Concr. Res., 66(17), 896–912.
Jeng, C.-H., Peng, S.-F., and Chiu, H.-J. (2014b). “A new apparatus and method for torsion test of large-size reinforced concrete beams.” J. Test. Eval., 42(1), 181–195.
Jeng, C.-H., Peng, S.-F., Chiu, H.-J., and Hsiao, C.-K. (2014c). “New torsion experiment on large-sized hollow reinforced concrete beams.” ACI Struct. J., 111(6), 1469–1480.
Jeng, C.-H., Peng, X., and Wong, Y. L. (2011). “Strain gradient effect in RC elements subjected to torsion.” Mag. Concr. Res., 63(5), 343–356.
Ju, H., Lee, D. H., Hwang, J. H., Kang, J. W., Kim, K. S., and Oh, Y. H. (2013). “Torsional behavior model of steel-fiber-reinforced concrete members modifying fixed-angle softened-truss model.” Compos. Part B, 45(1), 215–231.
Karayannis, C. G. (2000). “Smeared crack analysis for plain concrete in torsion.” J. Struct. Eng., 638–645.
Karayannis, C. G., and Chalioris, C. E. (2000). “Experimental validation of smeared analysis for plain concrete in torsion.” J. Struct. Eng., 646–653.
Lai, Y.-G. (1998). “Investigation on thickness of shear flow zone for RC beams subjected to pure torsion.” Master’s thesis, Dept. of Civil Engineering, National Cheng Kung Univ., Tainan, Taiwan (in Chinese).
Lampert, P., Lüchinger, P., and Thürlimann, B. (1971). “Torsion tests on reinforced and prestressed concrete beams.”, Institute für Baustatik, ETH, Zurich, Switzerland.
Lampert, P., and Thürlimann, B. (1968). “Torsion tests of reinforced concrete beams.”, Institute fur Baustatik, ETH, Zurich, Switzerland.
Lampert, P., and Thürlimann, B. (1969). “Torsion-bending tests on reinforced concrete beams.”, Institute fur Baustatik, ETH, Zurich, Switzerland.
Leonhardt, F., and Schelling, G. (1974). “Torsion tests on reinforced concrete beams.”, Deutscher Ausschuss für Stahlbeton, Berlin, 122.
Li, W.-K. (1999). “Behavior of reinforced concrete box beams subjected to pure torsion.” Master’s thesis, Dept. of Civil Engineering, Chung Yuan Christian Univ., Chung Li, Taiwan (in Chinese).
Mitchell, D. (1974). “The behaviour of structural concrete beams in pure torsion.” Ph.D. thesis, Dept. of Civil Engineering, Univ. of Toronto, Toronto.
Mitchell, D., and Collins, M. P. (1974). “Diagonal compression field theory—A rational model for structural concrete in pure torsion.” ACI Struct. J., 71(8), 396–408.
Mo, Y. L., Jeng, C.-H., and Chang, Y. S. (2000). “Torsional behavior of prestressed concrete box-girder bridges with corrugated steel webs.” ACI Struct. J., 97(6), 849–859.
Peng, X., and Wong, Y. L. (2011). “Behavior of reinforced concrete walls subjected to monotonic pure torsion—An experimental study.” Eng. Struct., 33(9), 2495–2508.
Rahal, K. N., and Collins, M. P. (1996). “Simple model for predicting torsional strength of reinforced and prestressed concrete sections.” ACI Struct. J., 93(6), 658–666.
Robinson, J. R., and Demorieux, J. M. (1968). “Tension-compression test on model of reinforced concrete beams.” Institute of Applied Research of Reinforced Concrete, Paris, France, 43.
Tavioand Teng, S. (2004). “Effective torsional rigidity of reinforced concrete members.” ACI Struct. J., 101(2), 252–260.
Vecchio, F. J., and Collins, M. P. (1981). “Stress-strain characteristic of reinforced concrete in pure shear.”, International Association of Bridge and Structural Engineering, Zurich, Switzerland, 221–225.
Zojaji, A. R., and Kabir, M. Z. (2012). “Analytical approach for predicting full torsional behavior of reinforced concrete beams strengthened with FRP materials.” Scientific Inst. Iran, 19(1), 51–63.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Apr 4, 2014
Accepted: Oct 29, 2014
Published online: Dec 24, 2014
Discussion open until: May 24, 2015
Published in print: Oct 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.