Fatigue Life Fragilities and Performance-Based Design of Wind Turbine Tower Base Connections
Publication: Journal of Structural Engineering
Volume 141, Issue 7
Abstract
Wind turbines are typically designed for a target service life of 20 years because of fatigue-related failures of the moving components such as the rotors and blades. Designing the tower to have the same lifetime as other components is clearly desirable for optimization of the wind turbine system. This study focuses on the fatigue life of the tower base connection subjected to wind loading. A simplified finite-element model for wind turbines subjected to nonlinear wind loading in time domain was developed specifically for application in this study. The relative motion between the wind speed and moving blades in the flapwise direction only creates force nonlinearity for the applied wind load and hence, necessitates application of a simple fluid/structure interaction model. Then, a model for fatigue assessment (Mode I), including crack propagation, was developed for the tower base connection. The inclusion of crack propagation is expected to extend the service life of the tower compared with conventional fatigue life analysis using the characteristic S-N approach. By varying the tower thickness, diameter, and considering predefined levels of crack propagation, fragility curves based on a fatigue life limit state are developed for application of performance-based design. The desired fatigue life of a wind turbine tower for different wind sites can be obtained based on the fragilities. Finally, performance-based design for a typical 5 MW wind turbine is used as an illustrative example in this study.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was funded by a Vietnam International Education Development-Ministry of Education and Training (VIED-MOET) Fellowship to the first author. The second author acknowledges the George T. Abell Professorship funds at Colorado State University.
References
AASHTO. (2012). AASHTO LRFD bridge design specifications, Washington, DC.
Aas-Jakobsen, K., and Strommen, E. (2001). “Time domain buffeting response calculations of slender structures.” J. Wind Eng. Ind. Aerodyn., 89(5), 341–364.
ASTM. (1982). “Design of fatigue and fracture resistant structures.” STP 761, Philadelphia, PA.
ASTM. (2014). “Standard specification for carbon structural steel.” A36/A36M-12.
Atadero, R. A., van de Lindt, J. W., and Goode, J. S. (2008). “Characterization of wind distributions for fatigue assessment of structural supports in Colorado.” Colorado Dept. of Transportation Safety and Traffic Engineering Branch, Denver.
AWS. (2000). “Structural welding code-steel.” D1.1:2000, FL.
British Standards Institution (BSI). (2005). “Guide to methods for assessing the acceptability of flaws in metallic structures.” BS7910, London.
Chen, X., Li, J., and Chen, J. (2009). “Wind-induced response analysis of a wind turbine tower including the blade-tower coupling effect.” J. Zhejiang Univ. Sci. A, 10(11), 1573–1580.
Chopra, A. K. (2012). Dynamics of structures: Theory and applications to earthquake engineering, Prentice Hall, Boston.
Chung, H., Manuel, L., and Frank, K. H. (2003). “Optimal inspection of fracture-critical steel trapezoidal girders.”, Texas Dept. of Transportation, Austin, TX.
Crandall, S., and Mark, W. D. (1963). Random vibration in mechanical systems, Academic Press, New York, 27–34.
Dawood, M., Goyal, R., Dhonde, H., and Bradberry, T. (2013). “Fatigue life assessment of cracked high mast illumination poles.” J. Perform. Constr. Facil., 311–320.
Dowling, N. E. (2007). Mechnical behavior of materials, Pearson Prentice Hall, Upper Saddle River, NJ.
Frese, T., and Dalhoff, P. (2000). “Fatigue analysis of bolted and welded joints.” NAFEMS seminar: Fatigue analysis, Wiesbaden, Germany, 1–18.
Goode, J. S., and van de Lindt, J. W. (2006). “Development of a reliability-based design procedure for high-mast lighting structural supports.” Structures Congress 2006: Structural Engineering and Public Safety, ASCE, Reston, VA, 1–10.
Goode, J. S., and van de Lindt, J. W. (2007). “Development of a semiprescriptive selection procedure for reliability-based fatigue design of high-mast lighting structural supports.” J. Perform. Constr. Facil., 193–206.
Griffis, L. G. (1993). “Serviceability limit states under wind load.” Eng. J., 30(1), 1–16.
Hanaki, S., Yamashita, M., Uchida, H., and Zako, M. (2010). “On stochastic evaluation of S–N data based on fatigue strength distribution.” Int. J. Fatigue, 32(3), 605–609.
Holmes, J. D. (2002). “Fatigue life under along-wind loading—Closed-form solutions.” Eng. Struct., 24(1), 109–114.
Holmes, J. D. (2004). Wind loading on structures, Spon, London, 47.
Jeong, M.-S., Lee, I., Yoo, S.-J., and Park, K.-C. (2013). “Torsional stiffness effects on the dynamic stability of a horizontal axis wind turbine blade.” Energies, 6(4), 2242–2261.
Jiao, G., and Moan, T. (1990). “Probabilistic analysis of fatigue due to Gaussian load processes.” Probab. Eng. Mech., 5(2), 76–83.
Jonkman, J., Butterfield, S., Musial, W., and Scott, G. (2009). “Definition of a 5-MW reference wind turbine for offshore system.”, National Renewable Energy Laboratory, Golden, CO.
Jonkman, J. M., and Buhl, M. L., Jr. (2005). “FAST user’s guide.”, National Renewable Energy Laboratory, Golden, CO.
Kooijman, H. J. T. (1996). “Bending-torsion coupling of a wind turbine rotor blade.”, Petten, Netherlands.
Kumar, K. S., and Stathopoulos, T. (1998). “Fatigue analysis of roof cladding under simulated wind loading.” J. Wind Eng. Ind. Aerodyn., 77–78, 171–183.
Laino, D. J., and Hansen, A. C. (2001). User’s guide to the computer software routines AeroDyn interface for ADAMS, Windward Engineering, LLC, Salt Lake City.
Lee, D., Hodges, D. H., and Patil, M. J. (2002). “Multi-flexible-body dynamic analysis of horizontal axis wind turbines.” Wind Energy, 5(4), 281–300.
Madsen, P. H., and Frandsen, S. (1984). “Wind-induced failure of wind turbines.” Eng. Struct., 6(4), 281–287.
Mahmoud, H. N., and Dexter, R. J. (2005). “Propagation rate of large cracks in stiffened panels under tension loading.” Marine Struct., 18(3), 265–288.
Manwell, J. F., Mcgowan, J. G., and Rogers, A. L. (2009). Wind energy explained—Theory, design and aplication, Wiley, Chichester, U.K.
Matsuichi, M., and Endo, T. (1968). “Fatigue of metals subjected to varying stress.” Proc., Japan Society of Mechanical Engineering, Tokyo, Japan.
Miner, M. A. (1945). “Cumulative damage in fatigue.” J. Appl. Mech., 12, A159–A164.
Morison, J. R. (1953). “The force distribution exerted by surface waves on piles.”, Univ. of California, Berkeley, CA.
Murtagh, P. J., Basu, B., and Broderick, B. M. (2004). “Wind force time-history generation by discrete Fourier transform (DFT).” Multi-body dynamics-moningtering and simulation Techniques-III, Wiley, New York, 147–154.
Murtagh, P. J., Basu, B., and Broderick, B. M. (2005). “Along-wind response of a wind turbine tower with blade coupling subjected to rotationally sampled wind loading.” Eng. Struct., 27(8), 1209–1219.
Nijssen, R. P. L. (2007). Fatigue life prediction and strength degradation of wind turbine rotor blade composites, Delft Univ. of Technology, Delft, Netherlands.
Noda, M., and Flay, R. G. J. (1999). “A simulation model for wind turbine blade fatigue loads.” J. Wind Eng. Ind. Aerodyn., 83(1–3), 527–540.
Paris, P., and Edorgan, F. (1963). “A critical analysis of crack propagation laws.” J. Fluid. Eng., 85(4), 528–533.
Quilligan, A., O’Connor, A., and Pakrashi, V. (2012). “Fragility analysis of steel and concrete wind turbine towers.” Eng. Struct., 36, 270–282.
Repetto, M. P., and Solari, G. (2009). “Closed form solution of the alongwind-induced fatigue damage to structures.” Eng. Struct., 31(10), 2414–2425.
Repetto, M. P., and Solari, G. (2010). “Wind-induced fatigue collapse of real slender structures.” Eng. Struct., 32(12), 3888–3898.
Repetto, M. P., and Solari, G. (2012). “Closed-form prediction of the alongwind-induced fatigue of structures.” J. Struct. Eng., 1149–1160.
Rosowsky, D. V., and Ellingwood, B. R. (2002). “Performance-based engineering of wood frame housing: Fragility analysis methodology.” J. Struct. Eng., 32–38.
Saravia, C. M., Machado, S. P., and Cortínez, V. H. (2013). “A composite beam finite element for multibody dynamics: Application to large wind turbine modeling.” Eng. Struct., 56, 1164–1176.
Simiu, E., and Scanlan, R. H. (1986). Wind effects on structures, Wiley, New York, 59.
Xu, Y., Liu, T., and Zhang, W. (2009). “Buffeting-induced fatigue damage assessment of a long suspension bridge.” Int. J. Fatigue, 31(3), 575–586.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 141 • Issue 7 • July 2015
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jun 7, 2013
Accepted: Jul 10, 2014
Published online: Aug 19, 2014
Discussion open until: Jan 19, 2015
Published in print: Jul 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.