Withdrawal Strength and Bending Yield Strength of Stainless Steel Nails
Publication: Journal of Structural Engineering
Volume 141, Issue 5
Abstract
It has been well established that stainless steel nails have superior corrosion performance compared to carbon steel or galvanized nails in treated wood; however, their mechanical fastening behavior is unknown. In this paper, the performance of stainless steel nails is examined with respect to two important properties used in wood connection design: withdrawal strength and nail bending yield strength. Different nail diameters, wood specific gravities, and nail manufacturers were examined. The current withdrawal design equations, developed from carbon steel nail data, overpredict the expected withdrawal strength when used for stainless steel nails, reducing the safety factor. As a result, a new equation was developed to predict the nail stainless steel withdrawal capacity. The data further indicate that nail bending yield strength values for stainless steel were similar to carbon steel data.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Forest and Paper Association (AFPA). (1999). “General dowel equations for calculating lateral connection values.”, Washington, DC, 18.
American Wood Council (AWC). (2012). “National design specification for wood construction.”, Washington, DC.
Andersson, N., Hugoson, P., Jagelčák, J., and Sökjer-Petersen, S. (2007). “Inclination tests to determine the static friction factor for different material combinations.”, MarlTerm AB, Höganäs, Sweden.
ASTM. (1999a). “Standard test methods for specific gravity of wood and wood-base materials.” D2395-93, West Conshohocken, PA.
ASTM. (1999b). “Standard test methods for direct moisture content measurement of wood and wood-base materials.” D4442-92, West Conshohocken, PA.
ASTM. (2008a). “Standard test method for determining bending yield moment of nails.” F1575-03, West Conshohocken, PA.
ASTM. (2008b). “Standard specifications for driven fasteners: Nails, spikes, and staples.” F1667-05, West Conshohocken, PA.
ASTM. (2009). “Standard test methods for mechanical fasteners in wood.” D1761-88, West Conshohocken, PA.
Atack, D., and Tabor, D. (1958). “The friction of wood.” Proc. R. Soc. London Ser. A, Math. Phys. Sci., 246(1247), 539–555.
Forest Products Laboratory. (1965). “Nail withdrawal resistance of American woods.”, U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, Madison, WI, 5.
Forest Products Laboratory. (2010). “Wood handbook—Wood as an engineering material.”, Dept. of Agriculture, Forest Service, Forest Products Laboratory, Madison, WI, 508.
Loferski, J. R., and McLain, T. E. (1991). “Static and impact flexural properties of common wire nails.” J. Test. Eval., 19(4), 297–304.
MacKenzie, W. M., and Karpovich, H. (1968). “The frictional behavior of wood.” Wood Sci. Technol., 2, 139–152.
McLain, T. E. (1997). “Design axial withdrawal strength from wood. 11. Plain-shank common wire nails.” For. Prod. J., 47(6), 103–109.
Rammer, D. R., and Mendez, A. M. (2008). “Withdrawal strength of post-frame ring shank nails.” Frame Building News, 59–67.
Rammer, D. R., Winistorfer, S. G., and Bender, D. A. (2001). “Withdrawal strength of threaded nails.” J. Struct. Eng., 442–449.
Skulteti, M. J., Bender, D. A., Winistorfer, S. G., and Pollock, D. G. (1997). “Withdrawal strength of ring-shank nails embedded in Southern pine lumber.” Trans. ASAE, 40(2), 451–456.
Zelinka, S. L., and Rammer, D. R. (2009). “Corrosion rates of fasteners in treated wood exposed to 100% relative humidity.” J. Mater. Civ. Eng., 758–763.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Oct 28, 2013
Accepted: Mar 27, 2014
Published online: Jul 17, 2014
Discussion open until: Dec 17, 2014
Published in print: May 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.