Seismic Performance of Joints between Steel K-Style Outrigger Trusses and Concrete Cores in Tall Buildings
Publication: Journal of Structural Engineering
Volume 140, Issue 12
Abstract
This paper presents finite-element analysis (FEA) and experimental study on the seismic behavior of joints between steel K-style outrigger truss and concrete core in tall buildings. Two new joint types with different details, including the joints with outside steel plates and encased steel plates, were conceived and intensively compared. Elaborate FEA models of the joints were developed, and a preliminary finite-element study was first conducted to evaluate the failure modes and hysteretic behavior of the joints to support the preparation of the laboratory test program. Then two specimens with different joint details were tested under cyclic loads. Several indexes that could reflect the seismic performance of the joints, such as the strength degradation, the rigidity degradation, the ductility, and the energy dissipation capacity, were analyzed. The mechanism of the joints was also revealed based on the stress distributions obtained by further FEA and test results, and a simplified FEA model was finally proposed for a more general purpose in routine design practice, and could provide a powerful tool for future research in design methods of the joints. The FEA and experimental results indicated that the joints exhibited favorable seismic performance which could transfer the loads reliably, and the joint with outside steel plates was better than that with encased steel plates, with more construction convenience, higher buckling load, and less concrete cracks.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers gratefully acknowledge the financial support provided by “Twelfth Five-Year” plan major projects supported by National Science and Technology (Grant No. 2011BAJ09B01) and Tsinghua University Initiative Scientific Research Program (Grant No. 2010Z03078).
References
Ali, M. M., and Moon, K. S. (2007). “Structural developments in tall buildings: Current trends and future prospects.” Archit. Sci. Rev., 50(3), 205–223.
Bazant, Z., and Oh, B. (1983). “Crack band theory for fracture of concrete.” Mater. Struct., 16(3), 155–177.
China Architecture and Building Press. (2003). “Standard for test method of mechanical properties on ordinary concrete.” GB/T 50081, Beijing.
China Standards Press. (2002). “Metallic materials-tensile testing at ambient temperature.” GB/T 228, Beijing.
Coull, A., and Lau, W. H. O. (1989). “Analysis of multi-outrigger-braced tall building structures.” J. Struct. Eng., 1811–1816.
Han, L. H., and Li, W. (2010). “Seismic performance of CFST column to steel beam joint with RC slab: Experiments.” J. Constr. Steel Res., 66(11), 1374–1386.
Hoenderkamp, J. C. D. (2004). “Shear wall with outrigger trusses on wall and column foundations.” Struct. Des. Tall Spec. Build., 13(1), 73–87.
Hossdorf, H., and van Amerongen, C. (1971). Model analysis of structures, Van Nostrad Reinhold Company, New York.
Lee, J. H., Bang, M., and Kim, J. Y. (2008). “An analytical model for high-rise wall-frame structures with outriggers.” Struct. Des. Tall Spec. Build., 17(4), 839–851.
Lei, Q., Liu, G. Y., and Hou, S. L. (2011). “Structural preliminary design of exceed-limit high-rise building of Kingkey financial center.” Build. Struct., 41(S1), 346–351 (in Chinese).
Ma, C. J., Zhang, L. P., and Fan, Z. (2009). “Nonlinear finite element analysis on connection joint of a super high-rise building.” Build. Struct., 39(9), 60–62 (in Chinese).
McNabb, J. W., and Muvdi, B. B. (1975). “Drift reduction factors for belted high-rise structures.” AISC Eng. J., 12(3), 88–91.
MSC. Marc Version 2010 [Computer software]. Santa Ana, CA, MSC. Software Corporation.
Nie, J. G., Bai, Y., and Cai, C. S. (2008a). “New connection system for confined concrete columns and beams I: Experimental study.” J. Struct. Eng., 1787–1799.
Nie, J. G., Qin, K., and Cai, C. S. (2008b). “Seismic behavior of connections composed of CFSSTCs and steel-concrete composite beams-experimental study.” J. Constr. Steel Res., 64(10), 1178–1191.
Nie, J. G., Tao, M. X., Cai, C. S., and Chen, G. (2011). “Modeling and investigation of elasto-plastic behavior of steel–concrete composite frame systems.” J. Constr. Steel Res., 67(12), 1973–1984.
Park, R., Priestley, M. J., and Gill, W. D. (1982). “Ductility of square confined concrete columns.” J. Struct. Div., 108(4), 929–950.
Park, W. S., and Yun, H. D. (2005). “Seismic behavior of coupling beams in a hybrid coupled shear walls.” J. Constr. Steel Res., 61(11), 1492–1524.
Rüsch, H. (1960). “Research toward a general flexural theory for structural concrete.” ACI Struct. J., 57(7), 1–28.
Shahrooz, B. M. (1993). “Seismic design and performance of composite coupled walls.” J. Struct. Eng., 3291–3309.
Shahrooz, B. M., Deason, J. T., and Tunc, G. (2004a). “Outrigger beam-wall connections I: Component testing and development of design model.” J. Struct. Eng., 253–261.
Shahrooz, B. M., Tunc, G., and Deason, J. T. (2004b). “Outrigger beam-wall connections II: Subassembly testing and further modeling enhancements.” J. Struct. Eng., 262–270.
Taranath, B. S. (1975). “Optimum belt truss location for high-rise structures.” Struct. Eng., 53(8), 18–21.
Taranath, B. S. (1998). Steel, concrete, and composite design of tall buildings, 2nd Ed., McGraw-Hill, New York.
Wang, D. S., and Zhou, J. L. (2010). “Development and prospect of hybrid high-rise building structures in China.” J. Build. Struct., 31(6), 62–70 (in Chinese).
Wu, J. R., and Li, Q. S. (2003). “Structural performance of multi-outrigger-braced tall buildings.” Struct. Des. Tall Spec. Build., 12(2), 155–176.
Zhou, J., et al. (2012). “Structural design on Wuhan center tower. Building structure.” Build. Struct., 42(5), 8–12 (in Chinese).
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Oct 21, 2012
Accepted: Dec 27, 2013
Published online: Jun 20, 2014
Discussion open until: Nov 20, 2014
Published in print: Dec 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.