Shear Strength and Moment-Shear Interaction in Steel-Concrete Composite Beams
Publication: Journal of Structural Engineering
Volume 140, Issue 11
Abstract
Steel-concrete composite beams are currently designed against shear by neglecting the contributions of the concrete slab and composite action, while the moment-shear interaction is not addressed in current structural codes of practice. This paper presents an experimental and numerical study on the shear strength and moment-shear interaction in simply-supported steel-concrete composite beams. Fourteen composite beams and one steel beam were tested under combined bending and shear. The effects of partial shear connection and shear reinforcement in the slab were also studied. A nonlinear finite element model was developed and found capable of accurately predicting the behavior of the composite beams. Extensive parametric studies were then conducted using the validated numerical model. The results allowed for the derivation of a moment-shear interaction law for composite beams and highlighted the high degree of conservatism in current structural specifications. It is shown that both the concrete slab and the composite action contribute significantly to the shear strength of a composite section and that the main factors that influence the shear capacity of a composite beam are the slab thickness and the degree of shear connection. Based on the experimental and numerical results, a design model is proposed for a more efficient design of compact composite beams in regions where the acting shear is high.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank all the technical staff of the Structures Laboratory of the University of Western Sydney for their precious assistance on the preparation and execution of the experimental program. The experimental work was carried out in the Structures Laboratory of the University of Western Sydney and funded by the Australian Research Council Discovery Project DP0879734.
References
Allison, R. W., Johnson, R. P., and May, I. M. (1982). “Tension field action in composite plate girders.” Proc. Inst. Civ. Eng., Part 2, 73(2), 255–276.
American Concrete Institute (ACI). (2011). “Building code requirements for structural concrete.”, ACI Committee 318, Structural Building Code, Farmington Hills, MI.
American Institute of Steel Construction. (2010). “Specification for structural steel buildings.”, Chicago.
ASTM. (2012). “Standard test method for compressive strength of cylindrical concrete specimens.”, West Conshohocken, PA.
Baskar, K., and Shanmugam, N. E. (2003). “Steel-concrete composite plate girders subject to combined shear and bending.” J. Constr. Steel Res., 59(4), 531–557.
British Standards Institute (BSI). (2003). “Eurocode 3: Design of steel structures. Part 1-5: Plated structural elements.” BS EN 1993-1-5, BSI, London.
British Standards Institute (BSI). (2004). “Eurocode 4: Design of composite steel and concrete structures. Part 1-1: General rules and rules for buildings.” BS EN 1994-1-1, BSI, London.
Bruneau, M., Uang, C. M., and Sabelli, R. (2011). Ductile design of steel structures, 2nd Ed., McGraw Hill.
Carreira, D. J., and Chu, K. H. (1985). “Stress-strain relationship for plain concrete in compression.” ACI J., Proc, 82(6), 797–804.
Clawson, W. C., and Darwin, D. (1982). “Tests of composite beams with web openings.” J. Struct. Div. ASCE, 108(ST1), 145–162.
Darwin, D., and Donahey, R. C. (1988). “LRFD for composite beams with unreinforced web openings.” J. Struct. Eng., 535–552.
Dassault Systèmes. (2012). ABAQUS user’s manual, version 6.12, Dassault Systèmes Simulia, Providence, RI.
Donahey, R. C., and Darwin, D. (1988). “Web openings in composite beams with ribbed slabs.” J. Struct. Eng., 518–534.
Johnson, R. P. (2012). Designer’s guide to Eurocode 4: Design of composite steel and concrete structures, 2nd Ed., ICE Publishing, London.
Johnson, R. P., and Willmington, R. T. (1972). “Vertical shear in continuous composite beams.” Proc. Inst. Civ. Eng., 53(2), 189–205.
Liang, Q. Q., Uy, B., Bradford, M., and Ronagh, H. (2004). “Ultimate strength of continuous composite beams in combined bending and shear.” J. Constr. Steel Res., 60(8), 1109–1128.
Liang, Q. Q., Uy, B., Bradford, M., and Ronagh, H. (2005). “Strength analysis of steel-concrete composite beams in combined bending and shear.” J. Struct. Eng., 1593–1600.
Marzouk, H., and Jiang, D. (1996). “Finite element evaluation of shear enhancement of high-strength concrete plates.” ACI Struct. J., 93(6), 667–673.
Narayanan, R., Al-Amery, R. I. M., and Roberts, T. M. (1989). “Shear strength of composite plate girders with rectangular web cutouts.” J. Constr. Steel Res., 12(2), 151–166.
Nie, J., Xiao, Y., and Chen, L. (2004). “Experimental studies on shear strength of steel-concrete composite beams.” J. Struct. Eng., 1206–1213.
Roberts, T. M., and Al-Amery, R. I. M. (1991). “Shear strength of composite plate girders with web cutouts.” J. Struct. Eng., 1897–1910.
Shanmugam, N. E., and Baskar, K. (2003). “Steel-concrete composite plate girders subject to shear loading.” J. Struct. Eng., 1230–1242.
Sherafati, A., Farimani, R., and Azizimanini, A. (2013). “Effect of concrete slab on shear capacity of composite plate girders under positive moment.” J. Bridge Eng., 18(2), 89–98.
Standards Australia. (2003). “Composite structures. Part 1: Simply supported beams.” AS2327.1, Standards Australia International, Sydney.
Uy, B., and Liew, J. Y. R. (2002). “Composite steel-concrete structures.” Chapter 51, Civil engineering handbook, W. F. Chen and J. Y. Richard Liew, eds., CRC Press, Boca Raton, FL.
Vasdravellis, G., Uy, B., Tan, E. L., and Kirkland, B. (2012a). “The effects of axial tension on the hogging-moment regions of composite beams.” J. Constr. Steel Res., 68(1), 20–33.
Vasdravellis, G., Uy, B., Tan, E. L., and Kirkland, B. (2012b). “The effects of axial tension on the sagging-moment regions of composite beams.” J. Constr. Steel Res., 72, 240–253.
Vasdravellis, G., Uy, B., Tan, E. L., and Kirkland, B. (2012c). “Behaviour and design of composite beams subjected to negative bending and compression.” J. Constr. Steel Res., 79, 34–47.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jan 31, 2013
Accepted: Nov 15, 2013
Published online: May 21, 2014
Discussion open until: Oct 21, 2014
Published in print: Nov 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.