Corrosion-Fatigue Strain-Life Model for Steel Bridge Girders under Various Weathering Conditions
Publication: Journal of Structural Engineering
Volume 140, Issue 6
Abstract
Corrosion of existing infrastructure, such as steel bridges, would significantly reduce its anticipated fatigue life. There are very few corrosion-fatigue models that address civil engineering applications. To account for corrosion in the fatigue life prediction of steel bridges, a new fatigue strain-life model based on the Smith-Watson-Topper model is proposed. The proposed model provides the fatigue life predictions in the form of ranges with a minimum and a maximum value. The model takes into account the corrosivity of the environment, the stress level, and the corrosive behavior of the material used. The resulting fatigue life predictions using the proposed model matched well with the experimental results reported in the literature for 24 steel beams that were subjected to various fatigue and weathering conditions. The analytical predictions show that the proposed model is accurate, simple, and practical and can be easily calibrated for different materials.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The financial support of the Natural Sciences and Engineering Research Council of Canada (NSERC) and the Canadian National Railway (CN) is greatly appreciated.
References
Albrecht, P. (1983). “Fatigue design stresses for weathering steel structures.” Corrosion fatigue: Mechanics, metallurgy, electrochemistry, and engineering, Vol. 801, ASTM International, 445.
Albrecht, P., and Jian-Guo, C. (1983). “Fatigue tests of 8-yr weathered A588 steel weldment.” J. Struct. Eng., 2048–2065.
Albrecht, P., and Lenwari, A. (2008). “Fatigue strength of trolley bridge stringers made of ASTM A7 steel.” J. Bridge Eng., 67–74.
Albrecht, P., and Lenwari, A. (2009). “Fatigue strength of weathered A588 steel beams.” J. Bridge Eng., 436–443.
Albrecht, P., and Maher, S. (1989). “Fatigue of eight-year weathered A588 steel stiffeners in salt water.” J. Struct. Eng., 1756–1767.
Albrecht, P., and Shabshab, C. (1994). “Fatigue strength of weathered rolled beam made of A588 steel.” J. Mater. Civil Eng., 407–428.
ASTM. (1992). “A588 standard specification for high strength low alloy structural steel with 345 MPa (50 ksi) minimum yield point.” Annual book of ASTM standards, A01.04, Philadelphia, PA.
Baumel, A., Jr., and Seeger, T. (1990). Materials data for cyclic loading, supplement 1, Elsevier Science, Amsterdam, Netherlands.
Boden, H. (1989). Approaches in modeling the impact of air pollution-induced material degradation, International Institute for Applied Systems Analysis, Laxenburg, Austria.
DeJong, S. J., Heffernan, P. J., and MacDougall, C. (2009). “Periodic overload corrosion fatigue of MMFX and stainless reinforcing steels.” J. Mater. Civil Eng., 1–9.
Draper, J. (2008). Modern metal fatigue analysis, EMAS Publishing, Warrington, U.K.
ISO. (1992a). “Corrosion of metals and alloys—Corrosivity of atmospheres—Classification.”, Geneva.
ISO. (1992b). “Corrosion of metals and alloys—Corrosivity of atmospheres—Guiding for the corrosivity categories.”, Geneva.
Kunihiro, T., Inove, K., and Fukuda, T. (1972). “Atmospheric exposure study of weathering steel.”, Ministry of Construction, Tokyo, Japan (in Japanese).
Metal Properties Council. (1983). Corrosion fatigue: Mechanics, metallurgy, electrochemistry, and engineering, Vol. 801, ASTM International, West Conshohocken, PA.
Novak, S. R. (1983). “Corrosion-fatigue crack initiation behavior of four structural steels.” Corrosion fatigue: Mechanics, metallurgy, electrochemistry, and engineering: A symposium, STP 801, T. W. Crooker, and B. N. Leis, eds., ASTM, West Conshohocken, PA, 26–63.
Smith, K., Topper, T. H., and Watson, P. (1970). “A stress-strain function for the fatigue of metals.” J. Mater., 5(4), 767–778.
Trethewey, K. R., and Chamberlain, J. (1996). Corrosion: for science and engineering, 2nd Ed., Longman Sc & Tech.
Zuraski, P. D., and Johnson, J. E. (1990). “Fatigue strength of deteriorated steel highway bridges.” J. Struct. Eng., 2671–2690.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: May 2, 2013
Accepted: Oct 29, 2013
Published online: Mar 12, 2014
Published in print: Jun 1, 2014
Discussion open until: Aug 12, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.