Damage Identification in Reinforced Concrete Beams Using Spatially Distributed Strain Measurements
Publication: Journal of Structural Engineering
Volume 139, Issue 12
Abstract
Brillouin optical time domain reflectometry or analysis (BOTDR/A) is one of the strain measurement technologies that is suitable for smart monitoring of civil engineering infrastructures. Although the technology has the advantage of supplying spatially distributed data, it is currently limited to a spatial resolution of approximately 1 m. This infers that the technology may lack the ability to identify the exact type and source of damage; that is, different geometrical configurations of cracking within a concrete beam may lead to similar BOTDR/A readings, and hence, the exact nature of cracking might not be resolved. This study suggests different crack indicators and analytically and experimentally examines their correlations with BOTDR/A readings of damaged RC beams. The analytical part entails a finite-element based statistical analysis of hundreds of cracking cases in fractured RC beams and their effects on the simulated BOTDR/A readings. It is found from the analysis that the increase of curvature measured by BOTDR/A is best correlated with the sum of ratios of crack size to the remaining healthy cross section within 1 m. This finding is supported by an experimental study of a cracked RC beam. The correlation, by itself, is only valid when the increase of curvature is associated with the damage and does not involve a curvature increase as a result of redistribution of moments. This, however, would be the case only in statically determinate beams. To facilitate the use of the correlation for statically indeterminate beams, this paper suggests an iterative algorithm that evaluates the different contributors to the increase of the curvature.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research described in this paper is supported by the National Israeli Road Company (MAATZ), through the National Building Research Institute at the Technion—Israel Institute of Technology. The authors wish to thank the engineers Elhanan Itzhak, Itai Elkayam, Ziv Charas and Dvir Rony for their assistance.
References
Bastianini, F., Matta, F., Galati, N., and Nanni, A. (2005a). “A Brillouin smart FRP material and a strain data post processing software for structural health monitoring through laboratory testing and field application on a highway bridge.” Proc. SPIE, 5765, 600–611.
Bastianini, F., Rizzo, A., Galati, N., Deze, U., and Nanni, A. (2005b). “Discontinuous Brillouin strain monitoring of small concrete bridges: Comparison between near to surface and smart FRP fiber installation techniques.” Proc. SPIE, 5765, 612–623.
Bernini, R., Minardo, A., Ciaranekka, S., Minutolo, V., and Zeni, L. (2011). “Distributed strain measurement along concrete beam via stimulated Brillouin scattering in optical fibers.” Int. J. Geophys., 2011, 5.
COMSOL Multiphysics [Computer software]. COMSOL Inc., Palo Alto, CA.
Deif, A., Martic-Perez, B., Zhang, C., Bao, X., and Li, W. (2010). “Detection of cracks in a reinforced concrete beam using distributed Brillouin fiber sensors.” Smart Mater. Struct., 19(5), 055014.
Galindez, C. A., and Thevenaz, L. (2008). “Effect of pulse chirp on distributed Brillouin fiber sensing.” Proc., SPIE, 19th Int. Conf. on Optical Fibre Sensors, Vol. 7004, 70044J.
Goldfeld, Y. (2007). “Identification of the stiffness distribution in statically indeterminate beams.” J. Sound Vib., 304(3–5), 918–931.
Klar, A., et al. (2006). “Distributed strain measurement for pile foundations.” Proc. Inst. Civ. Eng. Geotech. Eng., 159(3), 135–144.
Klar, A., and Linker, R. (2010). “Feasibility study of the automated detection and localization of underground tunnel excavation using Brillouin optical time domain reflectometer.” Tunnelling Underground Space Technol., 25(5), 575–586.
Klar, A., Marshall, A. M., Soga, K., and Mair, R. J. (2008). “Tunneling effects on jointed pipelines.” Can. Geotech. J., 45(1), 131–139.
Martin-Perez, B., Deif, A., Cousin, B., Zhang, C., Bao, X., and Li, W. (2010). “Strain monitoring in a reinforced concrete slab sustaining service loads by distributed Brillouin fiber optic sensors.” Can. J. Civ. Eng., 37(10), 1341–1349.
MATLAB [Computer software]. Natick, MA, MathWorks, Inc.
Mohamad, H., Bennett, P. J., Soga, K., Klar, A., and Pellow, A. (2007). “Distributed optical fiber strain sensing in a secant piled wall.” GSP 175: 7th FMGM 2007: Field Measurements in Geomechanics, Vol. 307, ASCE, 81–81.
Nikles, M., Thevenaz, L., and Robert, P. A. (1997). “Brillouin gain spectrum characterization in single mode optical fibers.” J. Light Wave Technol., 15(10), 1842–1851.
Ohno, H., Naruse, H., and Shimada, A. (2001). “Industrial applications of the BOTDR optical fiber strain sensor.” Optical Fiber Technol., 7(1), 45–64.
Vorster, T. E. B., Soga, K., Mair, R. J., Bennett, P. J., Klar, A., and Choy, C. K. (2006). “The use of fibre optic sensors to monitor pipeline response to tunnelling.” GeoCongress 2006, ASCE, Vol. 187, 1–6.
Wan, K., and Leung, C. (2007). “Applications of distributed fiber optic crack sensor for concrete structures.” Sens. Actuators A, 135(2), 458–464.
Zhang, W., Shni, B., Zhang, Y., Liu, J., and Zhu, Y. (2007). “The strain field method for structural damage identification using Brillouin optical fiber sensing.” Smart Mater. Struct., 16(3), 843–850.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jun 15, 2011
Accepted: Dec 27, 2012
Published online: Dec 29, 2012
Published in print: Dec 1, 2013
Discussion open until: Feb 9, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.