Bending Performance of Box-Based Cross-Laminated Timber Systems
Publication: Journal of Structural Engineering
Volume 139, Issue 12
Abstract
Cross-laminated timber (CLT) is a growing phenomenon and a recent building solution alternative in timber construction in North America by using massive or solid wood plates as roof, floor, and wall elements. In this paper a variation of the conventional CLT is considered by studying the performance of box-based CLT systems, which refer to box beams with multiple voids. In some loading situations, such as out-of-plane bending, these systems, which can reduce structural weight without significant loss of strength or stiffness, may be structurally efficient and cost competitive. Comprehensive three-dimensional finite-element models, which can be used to analyze the mechanical behavior of such box structures, were developed. Four prototype layups, each having five replicates, were designed, manufactured in-house, and tested under symmetric four-point bending (also known as third-point loadings). The numerical analysis agreed well with experimental data in terms of vertical deflection and flexural rigidity. This paper contributes to the understanding of the structural performance of box-based CLT systems for the commercial and residential applications.
Get full access to this article
View all available purchase options and get full access to this article.
References
ANSYS [Computer software]. Canonsburg, PA.
ASTM. (2002a). “Standard practice for evaluating allowable properties for grades of structural lumber.” D2915-98, West Conshohocken, PA.
ASTM. (2002b). “Standard test methods of static tests of lumber in structural sizes.” D198-99, West Conshohocken, PA.
Blass, H. J., and Fellmoser, P. (2004). “Design of solid wood panels with cross layers.” Proc., 8th World Conf. on Timber Engineering, Finnish Association of Civil Engineers RIL, Helsinki, Finland.
Blass, H. J., and Görlacher, R. (2003). “Brettsperrholz. Berechnungsgrundlagen.” Holzbau Kalender, Bruder, Karlsruhe, Germany, 580–598.
Czaderski, C., Steiger, R., Howald, M., Olia, S., and Gülzow, A. (2007). “Versuche und Berechnungen an allseitig gelagerten 3-schichtigen Brettsperrholzplatten.” Holz Roh Werkst, 65(5), 383–402.
Deutsches Institut für Normung. (2004). “Entwurf, Berechnung und Bemessung von Holzbauwerken—Allgemeine Bemessungsregeln und Bemessungsregeln für den Hochbau.”, Berlin.
European Committee for Standardization. (2004). “Eurocode 5: Design of timber structures. Part 1-1: General—Common rules and rues for buildings.”, CEN, Brussels, 124.
Forest Products Laboratory. (2010). “Chapter 5: Mechanical properties of wood.” Wood handbook—Wood as an engineering material, U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, Madison, WI.
Kirchhoff, G. (1850). “Über das Gleichgewicht und die Bewegung einer elastischen Scheibe.” J. für reine und angewandte mathematik, 40, 51–88.
Kreuzinger, H. (1999). “Platten, Scheiben und Schalen—ein Berechnungsmodell fur gangie Statikprogramme.” Bauen Mit Holz, 1, 34–39.
Lam, F., Lee, G., Yan, H., Gu, J., and Saravi, A. A. (2004). “Structural performance of wood-based stair stringers.” For. Prod. J., 54(4), 39–44.
Lekhnitskii, S. (1935). “Strength calculations of composite beams.” Vestnik inzhen i tekhnikov, 9.
Mindlin, R. (1951).” Influence of rotatory inertia and shear in flexural motions of isotropic elastic plates.” J. Appl. Mech., 18, 1031–1038.
Murakami, H. (1986). “Laminated composite plate theory with improved in-plane response.” J. Appl. Mech., 53(3), 661–666.
National Lumber Grades Authority (NLGA). (2005). Standard grading rules for Canadian lumber, Surrey, BC, Canada.
Ren, J. (1986). “A new theory of laminated plate.” Compos. Sci. Technol., 26(3), 225–239.
Stürzenbecher, R., and Hofstetter, K. (2011). “Bending of cross-ply laminated composites: An accurate and efficient plate theory based upon models of Lekhnitskii and Ren.” Compos. Struct., 93(3), 1078–1088.
Stürzenbecher, R., Hofstetter, K., and Eberhardsteiner, J. (2010). “Structural design of cross laminated timber (CLT) by advanced plate theories.” Compos. Sci. Technol., 70(9), 1368–1379.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Mar 20, 2012
Accepted: Dec 5, 2012
Published online: Dec 7, 2012
Published in print: Dec 1, 2013
Discussion open until: Feb 4, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.