Simplified Method for Estimation of Beam Plastic Rotation Demand in Special Moment-Resisting Steel-Frame Structures
Publication: Journal of Structural Engineering
Volume 139, Issue 11
Abstract
It is necessary to predict the plastic deformation demand of members and the story drift ratio for seismic design. In the present study, a simple method of estimating the plastic rotation of beams in special steel moment-resisting frame structures designed by the strong column-weak beam philosophy was developed. The plastic rotation of beams was calculated as the function of the story drift ratio based on the result of elastic analysis. The effects of the design parameters, such as moment redistribution, joint dimension, plastic mechanism, panel zone deformation, and the rocking effect of lateral bracing were addressed. For verification, the proposed method was applied to 6-story special moment frames with and/or without lateral bracing. The plastic rotations of beams in the same floor significantly varied according to the design parameters, although the story drift ratio was the same. The plastic rotations of beams predicted by the proposed method correlated well with those from nonlinear static analysis.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by research grants from the Catholic University of Daegu in 2012.
References
Architectural Institute of Korea (AIK). (2009). Korean building code – Structural, Architectural Institute of Korea, Seoul.
ASCE. (2000). “Prestandard and commentary for the seismic rehabilitation of buildings.” FEMA 356 Rep., FEMA, Washington, DC.
ASCE. (2006). “Minimum design loads for buildings and other structures.” SEI/ASCE 7-05, Reston, VA.
Comite Euro-International du Beton (CEB). (1996). RC frames under earthquake loading–State of the art report, Tomas Telford, London.
Englekirk, R. (1994). Steel structures–Controlling behavior through design, Wiley, Singapore.
Eom, T. S., Park, H. G., and Hong, S. G. (2012). “Evaluation of plastic rotation demands for earthquake design of reinforced concrete beams.” ACI Struct. J., 109(1), 113–122.
Gupta, A., and Krawinkler, H. (1999). “Seismic demands for performance evaluation of steel moment resisting frame structures.” John A. Blume Earthquake Engineering Center Rep. No. 132, Dept. of Civil Engineering, Stanford Univ., Stanford, CA.
International Code Council (ICC). (2009). International building code, Washington, DC.
Lee, C. H., and Chung, S. W. (2007). “A simplified analytical story drift evaluation of steel moment frames with radius-cut reduced beam section.” J. Constr. Steel Res., 63(4), 564–570.
Paulay, T., and Priestley, M. J. N. (1992). Seismic design of reinforced concrete and masonry buildings, Wiley, New York.
Prakash, V., Powell, G. H., and Campbell, S. (1993). “DRAIN-2DX base program description and user guide: Version 1.10.” SEMM Rep. No. 93/17, Univ. of California, Berkeley, CA.
SAC Joint Venture. (2000b). “State of the art report on connection performance.” Rep. No. FEMA-355D, FEMA, Washington, DC, 305.
SAC Joint Venture. (2000a). “State of the art report on systems performance of steel moment frames subject to earthquake ground shaking.” Rep. No. FEMA-355C, FEMA, Washington, DC, 344.
Seneviratna, G. D. P. K., and Krawinkler, H. (1997). “Evaluation of inelastic MDOF effects for seismic design.” John A. Blume Earthquake Engineering Center Rep. No. 120, Dept. of Civil Engineering, Stanford Univ., Stanford, CA.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Feb 27, 2012
Accepted: Nov 1, 2012
Published online: Nov 3, 2012
Published in print: Nov 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.