Experimental Fatigue Evaluation of Welded Connections in Cantilevered Steel Sign Structures
Publication: Journal of Structural Engineering
Volume 139, Issue 12
Abstract
Cantilevered steel sign structures, commonly used to support freestanding signs, are flexible, have low damping, and can be prone to fatigue-type failure as a result of wind-induced vibration. A sleeve connection, involving horizontal ring plates with two-sided fillet welds welded to the upper pipe and slot welds to connect the lower ring plates to the lower pipe, is commonly used to splice the upper and lower pipes of different diameters. Although the majority of these structures have performed well in long-term use, some structures have been damaged or destroyed as a result of cracking at the weld toe of the sleeve connections. A testing program was developed to evaluate the relative fatigue life of conventional and alternative connection details. Testing demonstrated that conventional welded connections had a short fatigue life. A revised sleeve connection detail incorporating a one-sided fillet weld detail at the critical joint was effective in enhancing the fatigue performance. Replacing slot welds by cement grouting the gap between two pipes significantly increased the fatigue life. Using a welded cone to provide a smooth transition between the pipes also showed improved performance. A tapered slip-joint connection that required no welded joints between the pipe sections provided the best fatigue performance.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Funding for this research was provided by the International Sign Association (ISA). The authors would like to thank Mr. Bill Dundas, ISA Director of Technical and Regulatory Affairs, and the ISA Mechanical and Structural Subcommittee, chaired by Mr. Wes Wilkens, for providing guidance in this research. Mr. Jack Lester prepared the specimen drawings and arranged the fabrication of the test specimens. Mr. Roy Flahive coordinated the test specimen preparation and inspection. Union Metal donated the tapered slip-joint specimen.
References
AASHTO. (2001). Standard specification for structural supports for highway signs, luminaires and traffic signals, Washington, DC.
AASHTO. (2012). LRFD bridge design specifications, 6th Ed., Washington, DC.
ABAQUS [Computer software]. ABAQUS Inc., Providence, RI.
AISC. (2010). Steel construction manual, 14th Ed., Chicago.
American Welding Society (AWS). (2006). “Structural welding code—Steel.”, Miami.
ASTM. (2012a). “Standard specification for carbon structural steel.” A36, West Conshohocken, PA.
ASTM. (2012b). “Standard specification for pipe, steel, black and hot-dipped, zinc-coated, welded and seamless.” A53, West Conshohocken, PA.
Jones, B. (1998). Engineering sign structures, ST Publications, Cincinnati.
Sim, H. B., and Uang, C. M. (2011a). “Welded sleeve connection design of cantilevered steel sign structures.” J. Struct. Eng., 137(11), 1303–1310.
Sim, H. B., and Uang, C. M. (2011b). “Fatigue tests of welded connections in cantilevered steel sign structures.”, Dept. of Structural Engineering, Univ. of California, San Diego.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Feb 16, 2012
Accepted: Sep 27, 2012
Published online: Sep 29, 2012
Published in print: Dec 1, 2013
Discussion open until: Jan 28, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.