Shake-Table Tests of a 3-Story Masonry-Infilled RC Frame Retrofitted with Composite Materials
Publication: Journal of Structural Engineering
Volume 139, Issue 8
Abstract
This paper presents a study that investigated the effectiveness of retrofitting unreinforced masonry infill walls with composite materials to enhance the seismic performance of infilled nonductile RC frames. The primary retrofit scheme considered was the use of engineered cementitious composite overlays. Shake-table tests were conducted on a , 3-story, 2-bay, masonry infilled RC frame that had one bottom-story wall retrofitted with engineered cementitious composites. The influence of this retrofit on the performance of the structure was investigated using the experimental observations and results of nonlinear finite element analyses. Furthermore, after walls in the second story of the structure were damaged, they were repaired by injecting epoxy into cracked mortar joints, and strengthened with a glass-fiber reinforced polymer overlay. It has been shown that both retrofit schemes are effective in enhancing the seismic performance of the structure and preventing diagonal shear failures of the RC columns.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research presented here was supported by National Science Foundation grant No. 0530709 awarded under the George E. Brown, Jr. Network for Earthquake Engineering Simulation Research (NEESR) program. The first and third authors’ doctoral research was partially supported by Graduate Fellowships from UCSD. The input of a professional advisory panel consisting of David Breiholz, John Kariotis, Gregory Kingsley, Joe Maffei, Ron Mayes, Paul Murray, and Michael Valley is gratefully acknowledged. The authors would like to thank the technical staff at the Englekirk Structural Engineering Center of UCSD for their efforts on the shake-table tests, Johnson Western Gunite Company for donating the labor for the application of the ECC overlay on the shake-table specimen, and Fyfe Company for donating the material and technical expertise for the GFRP installation on the specimen. However, opinions expressed in this paper are those of the authors and do not necessarily reflect those of the sponsor or other contributors.
References
Altin, S., Anil, O., Kara, M. E., and Kaya, M. (2008). “An experimental study on strengthening of masonry infilled RC frames using diagonal CFRP strips.” Compos., Part B Eng., 39(4), 680–693.
ASCE. (2005). “Minimum design loads for buildings and other structures.” ASCE/SEI 7-05, Reston, VA.
Bertero, V., and Brokken, S. (1983). “Infills in seismic resistant building.” J. Struct. Eng., 109(6), 1337–1361.
Dulacska, H. (1972). “Dowel action in reinforcement crossing cracks in concrete.” ACI J. Proc., 69(12), 754–757.
El-Dakhakhni, W. W., Hamid, A. A., and Elgaaly, M. F. (2004). “In-plane strengthening of URM infill wall assemblages using GFRP laminates.” Masonry Soc. J., 22(1), 39–50.
Harris, H. G., and Sabnis, G. (1999). Structural modeling and experimental techniques, 2nd Ed., CRC Press, Boca Raton, FL.
Kim, Y. Y., Kong, H. J., and Li, V. C. (2003). “Design of engineered cementitious composite (ECC) suitable for wet-mix shotcreting.” ACI Mater. J., 100(6), 511–518.
Koutromanos, I. (2011). “Numerical analysis of masonry-infilled reinforced concrete frames subjected to seismic loads and experimental evaluation of retrofit techniques.” Ph.D. dissertation, Dept. of Structural Engineering, Univ. of California, San Diego, La Jolla, CA.
Koutromanos, I., and Shing, P. B. (2012). “A cohesive crack model to simulate cyclic response of concrete and masonry structures.” ACI Struct. J., 109(3), 349–358.
Koutromanos, I., Stavridis, A., Shing, P. B., and Willam, K. (2011). “Numerical modeling of masonry-infilled RC frames subjected to seismic loads.” Comp. Struct., 89(11–12), 1026–1037.
Kyriakides, M. (2011). “Seismic retrofit of unreinforced masonry infills in non-ductile reinforced concrete frames using engineered cementitious composites.” Ph.D. dissertation, Stanford Univ., Stanford, CA.
Li, V. (1993). “From micromechanics to structural engineering: The design of cementitious composites for civil engineering applications.” J. Struct. Mech. Earthquake Eng., 10(2), 37–48.
Mander, J. B., Nair, B., Wojtkowski, K., and Ma, J. (1993). “An experimental study on the seismic performance of brick-infilled steel frames with and without retrofit.” Rep. NCEER-93-0001, National Center for Earthquake Engineering Research (NCEER), State Univ. of New York at Buffalo, Buffalo, NY.
Rosenblueth, E., and Meli, R. (1986). “The 1985 Mexico earthquake: Causes and effects in Mexico City.” Concr. Int., 8(5), 23–34.
Stavridis, A. (2009). “Analytical and experimental study of seismic performance of reinforced concrete frames infilled with masonry walls.” Ph.D. dissertation, Dept. of Structural Engineering, Univ. of California, San Diego, La Jolla, CA.
Stavridis, A., Koutromanos, I., and Shing, P. B. (2012). “Shake-table tests of a three-story reinforced concrete frame with masonry infill walls.” Earthq. Eng. Struct. Dyn., 41(6), 1089–1108.
Walraven, J. C. (1999). “Biaxial behavior of cracked reinforced concrete.” Structural concrete, vol. 1, Comité Euro-International du Béton - Federation Internationale de la Precontrainte, Lausanne, Switzerland, 213–224.
Yang, Y., Lepech, M., and Li, V. C. (2005). “Self -healing of ECC under cyclic wetting and drying.” Proc., Int. Workshop on Durability of Reinforced Concrete Under Combined Mechanical and Climatic Loads, Aedificatio Publishers, Freiburg, Germany, 231–242.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Dec 7, 2011
Accepted: Jul 24, 2012
Published online: Aug 11, 2012
Published in print: Aug 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.