Analysis of Elastic, Doubly Symmetric, Horizontally Curved Beams during Lifting
Publication: Journal of Structural Engineering
Volume 139, Issue 1
Abstract
The lifting of horizontally curved beams (or almost-straight beams with an imperfection in shape) is considered, with application in the construction of bridges. A circularly curved beam that is suspended at two symmetric locations by vertical or inclined cables is analyzed. The cross section of the beam is assumed to be doubly symmetric, the material is assumed to be linearly elastic, the cross-sectional dimensions are assumed to be small relative to the radius of curvature, and the deformations are assumed to be small. Both uniform (St. Venant) torsion and inclusion of nonuniform (warping) torsion are treated. Analytical equations are derived for the overall roll angle of the beam, the internal forces and moments, the weak-axis and strong-axis deflections, and the cross-sectional angle of twist. The behavior depends crucially on the locations of the lift points.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
We are grateful to Razvan Cojocaru for his assistance in the preparation of this manuscript, and to the reviewers for their helpful comments.
References
Anderson, A. R. (1971). “Lateral stability of long prestressed concrete beams.’ PCI J., 16(3), 7–9. Discussion by R. A. Swann, PCI J., 16(6), 85–86. Closure.” PCI J., 16(6), 86–87.
Bahder, T. B. (1995). Mathematica for scientists and engineers, Addison-Wesley, Reading, MA.
Bölcskei, E. (1954). “Die Stabilität des an zwei Punkten aufgehängten geraden Balkens.” Acta Tech. Hung., 8(3–4), 243–256.
Csonka, P. (1954). “Die Stabilität der an ihren Enden aufgehängten prismatischen Stäbe von rechteckigem Querschnitt.” Acta Tech. Hung., 8(1), 79–90.
Dabrowski, R. (1960). “Equations of bending and torsion of a curved thin-walled bar with asymmetric cross-section.” Arch. Mech. Stosow., 12(5/6), 789–799.
de Boer, A., and Schaafsma, D. G. (1998). “Rotation capacity of a reinforced prestressed concrete slender girder during lifting the girder.” Computational modelling of concrete structures, R. de Borst, N. Bicanic, H. Mang and G. Meschke, eds., A. A. Balkema, Rotterdam, Netherlands, 931–937.
Dux, P. F., and Kitipornchai, S. (1989). “Stability of I-beams under self-weight lifting.” Steel Constr., 23(2), 2–11.
Dux, P. F., and Kitipornchai, S. (1990). “Buckling of suspended I-beams.” J. Struct. Eng., 116(7), 1877–1891.
Essa, H. S., and Kennedy, D. J. L. (1993). “Distortional buckling of steel beams.” Engineering Rep. No. 185, Dept. of Civil Engineering, Univ. of Alberta, Edmonton, Canada.
Farris, J. F. (2008). “Behavior of horizontally curved steel I-girders during construction.” M.S. thesis, Univ. of Texas, Austin, TX.
Farris, J. F., et al. (2009). “Erection lifting practices for horizontally curved I-girders.” Proc., 2009 World Steel Bridge Symp., San Antonio, TX.
Heins, C. P. (1975). Bending and torsional design in structural members, D. C. Heath, Lexington, MA.
Kollár, L., ed. (1999). Structural stability in engineering practice, E & F Spon, London.
Laszlo, G., and Imper, R. R. (1987). “‘Handling and shipping of long span bridge beams.’ PCI J., 32(6), 86–101. Discussion by A. R. Anderson, PCI J., 34(1), 164–167. Closure.” PCI J., 34(1), 167–168.
Lebelle, P. (1959). “Stabilité élastique des poutres en béton précontraint a l'égard du déversement latéral.” Annales de l'Institut Technique du Batiment et des Travaux Publics, 141(9), 779–830.
Leonhardt, F. (1964). Prestressed concrete: Design and construction, 2nd Ed., W. Ernst, Berlin.
Mathematica [Computer software]. Champaign, IL, Wolfram Research.
Mast, R. F. (1989). “Lateral stability of long prestressed concrete beams, Part 1.” PCI J., 34(1), 34–53.
Muller, J. (1962). “Lateral stability of precast members during handling and placing.” PCI J., 7(1), 21–31.
Peart, W. L., Rhomberg, E. J., and James, R. W. (1992). “Buckling of suspended cambered girders.” J. Struct. Eng., 118(2), 505–528.
Petruzzi, B. J. (2010). “Stabilizing techniques for curved steel I-girders during construction.” M.S. thesis, Univ. of Texas, Austin, TX.
Petruzzi, B., et al. (2010). “Stabilizing techniques for partially constructed bridges.” Proc., SSRC 2010 Ann. Stabil. Conf., Structural Stability Research Council (SSRC), Rolla, MO, 351–370.
Pettersson, O. (1960). “Vippningsproblem vid hissning och montering av slanka balkar.” Nordisk Betong, 4(3), 231–270.
Plaut, R. H., and Moen, C. D. (2011). “Theory and applications of the lifting of elastic, doubly symmetric, horizontally curved beams.” Technical Rep. CE/VPI-ST11/03, Structural Engineering and Materials, Dept. of Civil and Environmental Engineering, Virginia Polytechnic Institute and State Univ., Blacksburg, VA.
Plaut, R. H., Moen, C. D., and Cojocaru, R. (2011). “Beam deflections and stresses during lifting.” Proc., SSRC 2011 Ann. Stabil. Conf., Pittsburgh, PA.
Schuh, A. C. (2008). “Behavior of horizontally curved steel I-girders during lifting.” M.S. thesis, Univ. of Texas, Austin, TX.
Schuh, A., et al. (2009). “The behavior of horizontally curved plate girders during lifting.” Proc., 2009 World Steel Bridge Symp., San Antonio, TX.
Stith, J., et al. (2009a). “A method to calculate rotational deformations of curved plate girders during lifting.” Proc., 2009 ASCE Struct. Cong., ASCE, New York, 68–77.
Stith, J., et al. (2009b). “Stability of curved I-girders during erection.” Proc., SSRC 2009 Ann. Stabil. Conf., Structural Stability Research Council (SSRC), Rolla, MO, 219–238.
Stith, J. C. (2010). “Predicting the behavior of horizontally curved I-girders during construction.” Ph.D. thesis, Univ. of Texas, Austin, TX.
Stith, J., et al. (2010a). “User-friendly finite element analysis program for steel I-girders during erection, and concrete placement.” Proc., SSRC 2010 Ann. Stabil. Conf., Structural Stability Research Council (SSRC), Rolla, MO, 331–349.
Stith, J., et al. (2010b). “Guidelines for design and safe handling of curved I-shaped steel girders.” Publication 0-5574-P1, Center for Transportation Research, Univ. of Texas, Austin, TX.
Stratford, T. J., and Burgoyne, C. J. (1999). “Lateral stability of long precast concrete beams.” Proc., Instruct. Civ. Eng. Struct. Build., 124(2), 169–180.
Stratford, T. J., and Burgoyne, C. J. (2000). “The toppling of hanging beams.” Int. J. Solids Struct., 27(26), 3569–3589.
Stratford, T. J., Burgoyne, C. J., and Taylor, H. P. J. (1999). “Stability design of long precast concrete beams.” Proc., Instruct. Civ. Eng. Struct. Build., 134(2), 159–168.
Swann, R. A., and Godden, W. G. (1966). “The lateral buckling of concrete beams lifted by cables. Struct. Eng., 44(1), 21–33.
Tan, D. (2000). “Analysis of self-weight induced collapse of long-deep beams. Struct. Eng., 44(1), 21–33.
Tarnai, T. (1979). “Variational methods for analysis of lateral buckling of beams hung at both ends.” Int. J. Mech. Sci., 21(6), 329–337.
Vidigal de Lima, M. C. V., and El Debs, M. K. (2005). “Numerical and experimental analysis of lateral stability in precast concrete beams.” Mag. Concr. Res., 57(10), 635–647.
Vlasov, V. Z. (1961). Thin-walled elastic beams, 2nd Ed., Israel Program for Scientific Translations, Jerusalem.
Wang, C. Y. (1990). “Lifting horizontal elastic beam at two points.” J. Eng. Mech., 116(1), 141–151.
Wang, C. Y. (2000). “Bridle sling lifting of elastic beam.” J. Eng. Mech., 126(11), 1198–1200.
Yegian, S. (1956). “Lateral buckling of I beams supported by cables.” Ph.D. thesis, Univ. of Illinois, Urbana, IL.
Ziemian, R. D., ed. (2010). Guide to stability design criteria for metal structures, 6th Ed., Wiley, Hoboken, NJ.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Feb 25, 2011
Accepted: Mar 29, 2012
Published online: Apr 3, 2012
Published in print: Jan 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.