Elastic Solutions for Eccentrically Loaded, Slender, Rectangular Spandrel Beams
Publication: Journal of Structural Engineering
Volume 138, Issue 7
Abstract
Spandrel beams in precast concrete buildings are widely used to support double-tee deck beams, particularly in parking garages. Spandrel beams of deep cross-sections, resisting eccentric loads from double-tee beams, can be susceptible to excessive lateral deformations and serviceability failures before reaching their strength limits. However, closed-form solutions for estimating lateral deflections in such members are not available in the technical literature. In this paper, approximate analytical solutions for the deflection of beams with thin rectangular sections are derived from second-order elastic analysis, and they are proposed for use in estimating maximum lateral deflections in spandrel beams under eccentric and uniformly distributed loads. Continuous lateral support is provided at the elevation of the floor deck to the spandrel beams. Thus, two cases are considered: one for laterally restrained beams under typical service conditions, and a second for laterally unrestrained beams prior to the establishing the floor deck connections, or if those connections fail prematurely during service or under extreme loading. An equivalent loading method is proposed to obtain the approximate analytical solutions, in which the differential equations of equilibrium governing the problem are simplified by replacing the actual loading in the spandrel beams with a substitute loading. Numerical solutions are also obtained from three-dimensional finite element analyses and their results are found to be in close agreement with the analytical solutions for two of the three common types of load-bearing precast, prestressed concrete spandrel beams.
Get full access to this article
View all available purchase options and get full access to this article.
References
ABAQUS version 6.8 [Computer software]. Dassault Systèmes Simulia, Providence, RI.
Bleich, F. (1952). Buckling strength of metal structures, McGraw-Hill, New York.
Galambos, T. V., Lin, F. J., and Johnston, B. G. (1996). Basic steel design with LRFD, Prentice-Hall, Upper Saddle River, NJ.
Gaylord, E. H., Gaylord, C. N., and Stallmeyer, J. E. (1992). Design of steel structures, 3rd Ed., McGraw-Hill, New York.
Hansell, W., and Winter, G. (1959). “Lateral stability of reinforced concrete beams.” J. Am. Concr. Inst.JACIAX, 31(3), 193–213.
Kalkan, I. (2009). “Lateral torsional buckling of rectangular reinforced concrete beams.” Ph.D. thesis, Georgia Institute of Technology, Atlanta, GA.
Klein, G. J. (1986). “Design of spandrel beams.” Research Project No. 5, Precast/Prestressed Concrete Institute, Chicago.
Lucier, G., Rizkalla, S., Zia, P., and Klein, G. (2007). “Precast concrete, -shaped spandrels revisited: Full-scale tests.” PCI J.PCIJEE, 52(2), 62–76.
Marshall, W. T. (1969). “A survey of the problem of lateral instability in reinforced concrete beams.” Proc. Inst. Civ. Eng., 43(3), 397–406.PCIEAT
Park, R., and Paulay, T. (1975). Reinforced concrete structures, Wiley, New York.
Raths, C. H. (1984). “Spandrel beam behavior and design.” PCI J.PCIJEE, 29(2), 62–131.
Revathi, P., and Menon, D. (2006). “Estimation of critical buckling moments in slender reinforced concrete beams.” ACI Struct. J., 103(2), 296–303.ASTJEG
Revathi, P., and Menon, D. (2007). “Slenderness effects in reinforced concrete beams.” ACI Struct. J., 104(4), 412–419.ASTJEG
Salmon, C. G., and Johnson, J. E. (1996). Steel structures, design and behavior, Harper-Collins, New York.
Sant, J. K., and Bletzacker, R. W. (1961). “Experimental study of lateral stability of reinforced concrete beams.” J. Am. Concr. Inst.JACIAX, 58(6), 713–736.
Timoshenko, S. P., and Gere, J. M. (1961). Theory of elastic stability, McGraw-Hill, New York.
Zhang, D., Fleischman, R. B., Naito, C. J., and Ren, R. (2011). “Experimental evaluation of pretopped precast diaphragm critical flexure joint under seismic demands.” J. Struct. Eng.JSENDH, 137(10), 1063–1074.
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: May 29, 2010
Accepted: Aug 25, 2011
Published online: Aug 27, 2011
Published in print: Jul 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.