Punching Shear Capacity of Interior SFRC Slab-Column Connections
Publication: Journal of Structural Engineering
Volume 138, Issue 5
Abstract
The paper deals with the punching shear behavior and the capacity of interior steel fiber-reinforced concrete (SFRC) slab-column connections. In the experimental study, the effect of the amount of fibers on the punching shear resistance and cracking behavior of slabs was investigated on a total of 12 small-scale flat slabs of varying dimensions. The results show a significant increase in the punching shear capacity, reduction of the average crack widths, and improved integrity of the SFRC slab-column connections in the postcracking stage in comparison with conventional reinforced concrete slabs. A new semiempirical, fracture-mechanics-based formula for estimation of the punching shear resistance of the interior SFRC slab-column connections is also presented in the paper. Its accuracy was verified through the comparison of the test results provided by the authors with those of other researchers, as well as with some already published formulas. The obtained results show that the proposed formula provides a higher prediction accuracy of the punching shear capacity of the SFRC slab-column connections in comparison with the existing prediction formulas.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This paper was funded by Ho Chi Minh University of Technology of Vietnam SR (Project No. T-KTXD-2010-18) and BEKAERT Indonesia Co. The experimental investigation of this study was conducted at Structural Engineering Laboratory at Ho Chi Minh University of Technology of Vietnam SR.
References
ACI Committee 318. (2008). Building code requirements for reinforced concrete and commentary, American Concrete Institute, Detroit.
Alexander, S. D. B., and Simmonds, S. H. (1992). “Punching shear tests of concrete slab-column joints containing fiber reinforcement.” ACI Struct. J.ASTJEG, 89(4), 425–432.
Bažant, Z. P., and Kazemi, M. T. (1991). “Size effect on diagonal shear failure of beams without stirrups.” ACI Struct. J.JACIAX, 88(3), 268–276.
BS 8110. (1997). Part 1. Structural use of concrete: Code of practice for design and construction, British Standard Institution, London.
Canadian Standards Association. (1984). “Code for the design of concrete structures for buildings.” CSA standard CAN3-A233-M84, Rexdale, Ontario, Canada.
CEB-FIP Model Code 1990. (1993). Design code. Comité Euro-International du Béton, Redwood Books, England.
Chana, P. S. (1986). “Shear failure of reinforced concrete beams.” Ph.D. thesis, Univ. of London.
Cheng, M. Y., and Parra-Montesinos, G. J. (2010a). “Evaluation steel fibers reinforcement for punching shear resistance in slab-column connections—Part 1: Monotonically increased load.” ACI Struct. J.ASTJEG, 107(1), 101–109.
Cheng, M. Y., and Parra-Montesinos, G. J. (2010b). “Evaluation steel fibers reinforcement for punching shear resistance in slab-column connections—Part 2: Lateral displacement reversals.” ACI Struct. J.ASTJEG, 107(1), 110–118.
Choi, K. K., Reda Taha, M., Park, H. G., and Maji, A. K. (2007). “Punching shear strength of interior concrete slab-column connections reinforced with steel fibers.” Cement & Concrete CompositesCCOCEG, 29, 409–420.
European Committee for Standardization (CEN). (2004). “Design of concrete structures. Part 1-1: General rules and rules for buildings.” Eurocode 2, Brussels, Belgium.
Farhey, D. N., Adin, M. A., and Yankelevsky, D. Z. (1993). “Flat slab-column subas-semblages under lateral loading.” J. Struct. Eng., 119(6), 1903–1916.
Feretzakis, A. (2005). “Flat slabs and punching shear: Reinforcement systems.” M.Sc. thesis, Univ. of Dundee, Dundee, UK.
Gastebled, O. J., and May, I. M. (2001). “Fracture mechanics model applied to shear failure of reinforced concrete beams without stirrups.” ACI Struct. J.ASTJEG, 98(2), 184–190.
Harajli, M. H., Maalouf, D., and Khatib, H. (1995). “Effect of fibers on the punching shear strength of slab-column connections.” Cem. Concr. Compos.CCOCEG, 17(2), 161–170.
Jenq, Y. S., and Shah, S. P. (1989). “Shear resistance of reinforced concrete beams—A fracture mechanics approach.” Fracture mechanics—Application to concrete, ACI SP-118, Li, V. and Bažant, Z. P., eds., American Concrete Institute, Farmington Hills, MI, 237–258.
Kang, T. H.W., and Wallace, J. W. (2008). “Seismic performance of reinforced concrete slab-column connections with thin plate stirrups.” ACI Struct. J.ASTJEG, 105(5), 617–625.
Kinnunen, S., and Nylander, H. (1960). “Punching of concrete slabs without shear reinforcement.” Transactions No. 158, Royal Institute of Technology, Stockholm.
Mander, J. B., Priestley, M. J. N., and Park, R. (1988). “Theoretical stress-strain model for confined concrete.” J. of Struct. Eng., 114(8), 1804–1826.
McHarg, P. J., Cook, W. D., Mitchell, D., and Yoon, Y. S. (2000). “Benefits of concentrated slab reinforcement and steel fibers on performance of slab-column connections.” ACI Struct. J.ASTJEG, 97(2), 225–234.
Megally, S., and Ghali, A. (2000). “Punching shear design of earthquake resistant slab-column connections.” ACI Struct. J.ASTJEG, 97(5), 720–730.
Naaman, A. E., Likhitruangsilp, V., and Parra-Montesinos, G. J. (2007). “Punching shear response of high-performance-fiber-reinforced-cementitious composite slabs.” ACI Struct. J.ASTJEG, 104(2), 170–179.
Narayanan, R., and Darwish, I. Y. S. (1987). “Use of steel fibers as shear reinforcement.” ACI Struct. J.ASTJEG, 84(3), 216–227.
Park, R., and Paulay, T. (1974). Reinforced concrete structures, Wiley, New York.
Regan, P. E., and Braestrup, M. W. (1985). “Punching shear in reinforced concrete.” A State of Art Report by CEB Bull. 168, CEB, Lausanne, Switzerland.
Reinhardt, H. W., and Walraven, J. C. (1982). “Cracks in concrete subject to shear.” J. Struct. Div.JSDEAG, 180(1), 207–224.
RILEM TC 162-TDF. (2003). “Test and design methods for steel fibre reinforced concrete.” Mater. Struct.MASTED, 36(262), 560–567.
Shaaban, A. M., and Gesund, H. (1994). “Punching shear strength of steel fiber reinforced concrete flat plates.” ACI Struct. J.ASTJEG, 91(4), 406–414.
So, K. O., and Karihaloo, B. L. (1993). “Shear capacity of longitudinally reinforced beams—A fracture mechanics approach.” ACI Struct. J.ASTJEG, 90(6), 591–600.
Swamy, R. N., and Ali, S. A. R. (1982). “Punching shear behavior of reinforced slab–column connections made with steel fiber concrete.” ACI Struct. J.ASTJEG, 79(5), 392–406.
Swamy, R. N., Mangat, P. S., and Rao, C. V. S. K. (1974). “The mechanics of fibre reinforcement of cement-matrices.” Fibre Reinforced Concrete, ACI SP-44, American Concrete Institute, Farmington Hills, MI, 1–28.
Theodorakopoulos, D. D., and Swamy, N. (1993). “Contribution of steel fibers to the strength characteristics of lightweight concrete slab-column connections falling in punching shear.” ACI Struct. J.ASTJEG, 90(4), 342–355.
Xu, S., and Reinhardt, H. W. (2005). “Shear fracture on the basis of fracture mechanics.” Otto-Graf-JOGRJE8, 16, 21–78.
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Nov 8, 2010
Accepted: Aug 19, 2011
Published online: Aug 22, 2011
Published in print: May 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.