Lateral Cyclic Behavior of Reinforced Concrete Columns Retrofitted with Shape Memory Spirals and FRP Wraps
Publication: Journal of Structural Engineering
Volume 137, Issue 11
Abstract
This experimental work focuses on enhancing the lateral cyclic behavior of RC columns by using an innovative active-confinement technique. The thermally triggered recovery stress of prestrained shape memory alloy (SMA) spirals is used to apply the active-confinement pressure. Four -scale RC columns, three of which are retrofitted with different schemes, are tested under quasi-static lateral cyclic loading. The plastic hinge region of the first retrofitted column is actively confined using the new SMA spirals, whereas for the second column, traditional passive confinement is applied by using a glass fiber-reinforced polymer (GFRP)/epoxy jacket. The third column is retrofitted by using a hybrid confinement approach, which is applied by using SMA spirals and GFRP jacket simultaneously at the plastic hinge zone. The confinement pressure of the three retrofitted columns is designed to be the same. The results show a significant increase in the flexural ductility capacity and energy dissipation capability of the columns retrofitted with SMA spirals compared with those of the as-built column and the GFRP-retrofitted column. SMA spirals also show an outstanding ability to mitigate the damage sustained by the columns under extreme lateral drifts.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers acknowledge the support for this study provided by the National Cooperative Highway Research Program through its Innovations Deserving Exploratory Analysis project (NCHRP-IDEA) under project no. NCHRP135.
References
American Association of State Highway Officials (AASHO). (1969). Standard specifications for highway bridges, 10th Ed., Washington, DC.
Andrawes, B., and DesRoches, R. (2007). “Comparison between shape memory alloy seismic restrainers and other bridge retrofit devices.” J. Bridge Eng., 12(6), 700–709.
Andrawes, B., Shin, M., and Wierschem, N. (2010). “Active confinement of reinforced concrete bridge columns using shape memory alloys.” J. Bridge Eng., 15(1), 81–89.
Chai, Y. H., Priestley, M. J. N., and Seible, F. (1991). “Seismic retrofit of circular bridge columns for enhanced flexural performance.” ACI Struct. J., 88(5), 572–584.
Duerig, T. W., and Melton, K. N. (1989). “Wide Hysteresis NiTiNb Alloys.” The martensitic transformation in science and technology, E. Hornbogen, ed., Butterworth-Heinemann, London, 191–198.
Fédération Internationale du Béton (fib). (2003). “Seismic assessment and retrofit of reinforced concrete buildings.” fib Bulletin No. 24, International Federation for Structural Concrete, Lausanne, Switzerland.
Fédération Internationale du Béton (fib). (2007). “Seismic bridge design and retrofit—structural solutions.” fib Bulletin No.39, International Federation for Structural Concrete, Lausanne, Switzerland.
Gamble, W. L., Hawkins, N. M., and Kaspar, I. I. (1996). “Seismic retrofitting experience and experiments in Illinois.” Proc., 5th National Workshop on Bridge Research in Progress, National Center for Earthquake Engineering Research (NCEER), State Univ. of New York at Buffalo, Buffalo, NY, 245–250.
Hawkins, G. F., Patel, N. R., Steckel, G. I., and Sultan, M. (1996). “Failure analysis of highway bridge column composite overwraps.” Fiber Composites in Infrastructure (First Int. Conf. on Composites in Infrastructure ICCI 96), Dept. of Civil Engineering and Engineering Mechanics, Univ. of Arizona, Tucson, AZ.
Haroun, M. A., and Elsanadedy, H. M. (2005). “Fiber-reinforced plastic jackets for ductility enhancement of reinforced concrete bridge columns with poor lap-splice detailing.” J. Bridge Eng., 10(6), 749–757.
Kussagawa, M., Nakamura, T., and Asada, Y. (2001). “Fundamental deformation and recovery behaviors of Ni-Ti-Nb shape memory alloy.” JSME Int. J., 44(1), 57–63.
Krstulovic-Opara, N., and Thiedeman, P. D. (2000). “Active confinement of concrete members with self-stressing composites.” ACI Mater. J., 97(3), 297–308.
Li, Y. F., Chen, S., Chang, K. C., and Liu, K. Y. (2005). “A constitutive model of concrete confined by steel reinforcements and steel jackets.” Can. J. Civ. Eng., 32(1), 279–288.
Lorenzis, L. D., and Tepfers, R. (2003). “Comparative study of models on confinement of concrete cylinders with fiber-reinforced polymer composites.” J. Compos. Constr., 7(3), 219–237.
Maekawa, K., and An, X. (2000). “Shear failure and ductility of RC columns after yielding of main reinforcement.” Eng. Fract. Mech., 65(2), 335–368.
Mander, J. B., Priestley, M. J. N., and Park, R. (1984). “Seismic design of bridge piers.” Research Rep. 84-2, Dept. of Civil Engineering, Univ. of Canterbury, Christchurch, New Zealand.
Mander, J. B., Priestley, M. J. N., and Park, R. (1988). “Theoretical stress strain model for confined concrete.” J. Struct. Eng., 114(8), 1804–1826.
Nesheli, K. N., and Meguro, K. (2006). “Seismic retrofitting of earthquake-damaged concrete columns by lateral pre-tensioning of FRP belts.” Proc., 8th U.S. National Conf. on Earthquake Engineering, Earthquake Engineering Research Institute (EERI), El Cerrito, CA.
Otsuak, K., and Wayman, C. M. (2002). Shape memory material, New Ed., Cambridge University Press, Cambridge, England.
Priestley, M. J. N., and Seible, F. (1995). “Design of seismic retrofit measures for concrete and masonry structures.” Constr. Build. Mater., 9(6), 365–377.
Priestley, M. J. N., Seible, F., Xiao, Y., and Verma, R. (1994). “Steel jacket retrofitting of reinforced concrete bridge columns for enhanced shear strength Part 1: Theoretical considerations and test design.” ACI Struct. J., 91(4), 394–405.
Richart, F. E., Brandtzaeg, A., and Brow, R. L. (1928). “A study of the failure of concrete under combined compressive stress.” Bulletin No. 185, Univ. of Illinois Engineering Experiment Station, Urbana, IL, 104.
Richart, F. E., Brandtzaeg, A., and Brown, R. L. (1929). “The failure of plain and spirally reinforced concrete in compression.” Bulletin No. 190, Univ. of Illinois Engineering Experiment Station, Urbana, IL.
Saatcioglu, M., and Yalcin, C. (2003). “External prestressing concrete columns for improved seismic shear resistance.” J. Struct. Eng., 129(8), 1057–1070.
Samaan, M., Mirmiran, A., and Shahawy, M. (1998). “Model of concrete confined by fiber composites.” J. Struct. Eng., 124(9), 1025–1031.
Shin, M., and Andrawes, B. (2010). “Experimental investigation of actively confined concrete using shape memory alloys.” Eng. Struct., 32(3), 656–664.
Tamai, H., and Kitagawa, Y. (2002). “Pseudoelastic behavior of shape memory alloy wires and its application to seismic resistance member for building.” Comput. Mater. Sci., 25(1–2), 218–227.
Wilde, K., Gardoni, P., and Fujino, Y. (2000). “Base isolation system with shape memory alloy device for elevated highway bridges.” Eng. Struct., 22(3), 222–229.
Yamakawa, T., Banazadeh, M., and Fujikawa, S. (2004). “Emergency retrofit of damaged RC columns right after seismic attack using pre-tensioned aramid fiber belts.” 1st Conf. on Applications of FRP Composites in Construction and Rehabilitation of Structures, Building and Housing Research Center (BHRC), Tehran, Iran.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Mar 8, 2010
Accepted: Dec 27, 2010
Published online: Dec 29, 2010
Published in print: Nov 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.